Datasheet

Determining the Model and Settings 2 / Pulse DC Mode

 ION LED···Indicates the polarity of ions being emitted and the ion balance.

LED name

ION

–

Illuminates when positive ions are being emitted from the ionizer (Orange).

[With autobalance sensor] Indicates the state of ion balancing (Green).

[Without autobalance sensor] Remains turned off.

Illuminates when negative ions are being emitted from the ionizer (Blue).

Function

· The state of ion balancing can be checked by reading the LED display.

LED name

ALARM

SNSR

NDL CHECK

Function

Light ON (or Blinking)

Light OFF

Under ±30 V

Over ±30 V

Ion balance

OK LED

∗

The OK LED display blinks when the ion balance is approaching the limits of the

adjustable range, signaling that the time for electrode needle maintenance is near.

8) LED display

 POWER LED···Indicates the state of power input and sensor connection.

LED name

POWER

MAIN

SNSR

Illuminates when power is supplied (Green).

(Blinks when the power supply is irregular.)

Illuminates when the feedback sensor is connected (Green).

Function

 ALARM LED···Indicates abnormal states of the ionizer.

Illuminates when an abnormal current flows through an electrode needle (Red).

Illuminates when the autobalance sensor is not operating normally (Red).

Illuminates when electrode needle stain is detected (Red).

(Blinks when the stain is being detected.)

Series IZS31