User Manual
12
6. How to replace the element
Warning
Before replacement, make sure that no pressure remains in the equipment.
After replacement, confirm that the product satisfies specific functions and no external leakage occurs
before operating it.
Step 1
Remove the bowl assembly from the product.
While the lock button is held down, rotate the bowl assembly by approx. 30 degrees so that the
mating marks of the body and bowl assembly meet each other. Then remove the bowl assembly by
pulling it downward.
Lock button
Bowl assembly
Procedure 1
Rotate 30 degrees
Procedure2
Pull downward
Mating mark of the
bowl assembly
Mating mark of the body
Ali
gn the mating marks
HF2-BFA
HF2-BFB
HF2-BFD
HF2-BFC
2022-10-1811:23
DP 097499