Specifications

NOTE: PLEASE CONSULT YOUR NETWORK ADMINISTRATOR FOR ASSISTANCE IN CON-

FIGURING THESE ADVANCED SECURITY OPTIONS.

In addition to WPA and 802.1x, there are the options to enable WEP (Pre-Shared Key) or the new

Wi-Fi Protected Access Pre-Shared Key (WPA-PSK) on your wireless LAN. For WEP (Wired Equiva-

lent Privacy) security, the SMC2536W-AG Utility supports HEX and ASCII key entries.

For the HEX Key Format, the security is enabled by entering 10-digit keys for the 64-bit WEP con-

figuration, 26-digit keys for a 128-bit WEP configuration, and 32-digit keys for a 152-bit WEP configu-

ration. Allowed hex keys are 0-9 and A-F. For the ASCII Key Format, the security is enabled by en-

tering 5 characters for 64-bit WEP, 13 characters for 128-bit WEP and 16 characters for 152-bit WEP.

Click Pre-Shared Key and select the [Configure] button to enter in WEP keys.

Select the desired encryption strength from the drop-down menu on the right (64-, 128- or 152-bit)

and then enter the appropriate keys in Key 1, 2, 3, or 4. Remember to select the correct radio button

on the left. Then click [OK].