Specifications

13
7| Driver Installation – Option 2 (Manually)
Windows 98SE/ME/2000/XP
Section 7.1| Installing SMC2512W-AG PCI Card - Software Setup
The device driver software contained in the Setup program is necessary for appropriate operation of
the SMC2512W-AG PCI Card. Together with the special IRQ steering circuit embedded in the chipset,
the driver software accomplishes necessary hardware configuration and IRQ routing emulation for the
SMC2512W-AG PCI Card.
Included in the Setup program are software drivers for various operating systems, including Windows
98SE/ME/2000.
NOTE: SMC2512W-AG PCI Card in Windows 2000 and Windows XP requires no software
setup. For all the other supported system, software setup should be performed first, then install the
WLAN PC card driver.
A setup program is provided to automatically identify the running system and install corresponding
software driver accordingly. Please refer to following instructions to install the device driver software
for your SMC2512W-AG PCI Card.
* If your system is Windows 2000 or Windows XP, you can skip this chapter.
1. Power on your computer with Windows 98SE/ME/2000.
2. Insert the EZ Installation Wizard and Documentation CD into your CDROM drive.
3.
Click on the Start button on the task bar to open the start menu.
4.
Click on Run, the Run dialog box appears.
5.
In the text box, type in d:\Winroute\Setup.exe (where d: is the CDROM driver letter) to execute
the setup program.
6.
The welcome dialog box appears, click Next> to continue setup.
7.
The Software License Agreement dialog box appears. Read through the software license agree-
ment, and then click Yes to continue setup procedure.