Datasheet

Intermediate strokes are available.
∗ Please consult with SMC for longer strokes.
Specifi cations
Maximum Strokes
Accessories
∗ Do not use a rod end (or fl oating joint) together with a single clevis with a ball joint (or clevis
pivot bracket with a ball joint).
∗ Refer to pages 11 to 14 for dimensions and part numbers of the accessories.
Bore size [mm]
32 40 50 63 80 100
Action Double acting
Fluid Air
Proof pressure 1.5 MPa
Maximum operating pressure 1.0 MPa
Minimum operating pressure 0.05 MPa
Ambient and fluid
temperature
Without auto switch: –20 to 70 °C (No freezing)
With auto switch: –10 to 60 °C (No freezing)
Lubrication Not required (Non-lube)
Operating piston speed 50 to 1000 mm/s
Allowable stroke tolerance Up to 500 stroke:
+2
0
, 501 to 1000 stroke:
+2.4
0
Cushion Air cushion on both ends + Bumper cushion
Port size G 1/8 G 1/4 G 1/4 G 3/8 G 3/8 G 1/2
Mounting
Basic, Axial foot, Rod flange,
Head flange, Single clevis, Double clevis
Non-rotating accuracy
±0.5°±0.5°±0.3°
Allowable rotational torque
[N·m]
0.25 0.45 0.64 0.79
Bore size [mm] Maximum stroke
∗
32
500
40
500
50
600
63
600
80
800
100
800
Mounting Basic Foot
Rod
flange
Head
flange
Single
clevis
Double
clevis
Standard
Rod end nut
앬앬앬앬앬앬
Clevis pin — — — — —
앬
Option
Rod end
앬앬앬앬앬앬
Rod clevis
앬앬앬앬앬앬
Rod boot — — — — — —
Be sure to read this before handling.
Refer to the back cover for Safety In-
structions. For Actuator and Auto
Switch Precautions, refer to “Han-
dling Precautions for SMC Products”
and the Operation Manual on SMC
website, http://www.smc.eu
Precautions
Refer to pages 19 and 20 for cylinders with auto switches.
· Auto switch proper mounting position (detection at stroke end)
· Minimum stroke for auto switch mounting
· Operating range
· How to mount and move the auto switch
16
ISO (15552) Standard
Air Cylinder: Non-rotating Rod Type
Double Acting, Single/Double Rod
Series CP96K