Datasheet

10, 15, 20, 25, 30, 35, 40
45, 50, 75, 100
12, 16
50, 63
80, 100
32, 40
20, 25
5, 10, 15, 20, 25, 30
5, 10, 15, 20, 25, 30, 35
40, 45, 50
5, 10, 15, 20, 25, 30, 35
40, 45, 50, 75, 100
10, 15, 20, 25, 30, 35, 40
45, 50, 75, 100
50, 63
80, 100
32, 40
20, 25
5, 10, 15, 20, 25, 30, 35
40, 45, 50
5, 10, 15, 20, 25, 30, 35
40, 45, 50, 75, 100
-XA쏔
-XB6
-XB7
-XB9
-XB13
-XC4
-XC6
-XC35
-XC36
-XC85
-X271
Special rod end shape
Heat resistant cylinder (–10 to 150°C) w/o auto switch only
Cold resistant cylinder (–40 to 70°C) w/o auto switch only
Low-speed cylinder (10 to 50 mm/s)
Low-speed cylinder (5 to 50 mm/s)
With heavy-duty scraper, ø32 to ø100 only
With coil scraper
With boss on rod side
Grease for food processing equipment
Fluororubber seals
Symbol Specifications
Rod end
male thread
Symbol
Double acting,
Single rod
Made to Order
(For details, refer to pages 201 to 235.)
Piston rod/Retaining ring/Rod end nut
material: Stainless steel
• Auto switch proper mounting position
(detection at stroke end) and its mounting
height
• Minimum stroke for auto switch mounting
• Operating range
• Auto switch mounting brackets/Part no.
Refer to pages 141 to 145 for the specifications
of cylinders with autoswitches.
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Stroke length tolerance
Ambient and fluid temperature
Lubrication
Piston speed
Without cushion
With rubber bumper
Pneumatic type
Bore size (mm)
12 16 20 25 32 40 50 63 80 100
Note) Stroke length tolerance does not include the amount of bumper change.
Allowable kinetic
energy (J)
0.022
0.043
0.038
0.075
0.055
0.11
0.09
0.18
0.15
0.29
0.26
0.52
Double acting, Single rod
Air
1.5 MPa
1.0 MPa
Not required (Non-lube)
50 to 500 mm/s
0.46
0.91
0.77
1.54
1.36
2.71
2.27
4.54
0.07 MPa 0.05 MPa
Without auto switch: –10 to 70°C (No freezing)
With auto switch: –10 to 60°C (No freezing)
Specifications
+1.0 mm
0
Note)
+1.0 mm
0
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Piston speed
Cushion
Stroke length tolerance
Air-hydro type
Bore size (mm)
20 25 32 40 50 63 80 100
Note) Refer to “Handling Precautions for SMC Products” (M-E03-3) for Actuator Precautions (5).
Double acting, Single rod
Turbine oil
Note)
1.5 MPa
1.0 MPa
5 to 60°C
5 to 50 mm/s
None
0.18 MPa 0.1 MPa
Pneumatic type (Non-lube) (mm)
Bore size Standard stroke
Air-hydro type (mm)
Bore size
Standard Strokes
A spacer is installed in the standard stroke body.
Refer to “How to Order” for the standard model number. (P.121)
Strokes in 1 mm intervals are available by installing a spacer
in the standard stroke cylinder.
Part no.: CQP2B50-57D
CQP2B50-75D with 18 mm width spacer inside
The B dimension is 115.5 mm.
Bore size
12, 16
20, 25
32 to 100
Stroke range
1 to 29
1 to 49
1 to 99
Type
Part no.
Description
Stroke range
Example
Manufacture of Intermediate Strokes
• Except air-hydro type
• In the case of spacer type, intermediate strokes with bumper for ø40 to ø100, it can be
manufactured in 5 mm intervals in 5 mm and 55 to 95 mm.
Standard
Large Bore
Size
Long Stroke
Non-rotating
Rod
Axial Piping
Anti-lateral
Load
With End Lock
Water
Resistant
Auto SwitchMade to Order
With Auto
Switch
Series CQP2
Compact Cylinder: Axial Piping
Double Acting, Single Rod
122