Datasheet

-XA첸
-XB10
-XC4
-XC6
-XC26
-XC85
-X271
Symbol Specifications
Symbol
Double acting,
Single rod
Made to Order
(For details, refer to pages 201 to 235.)
Change of rod end shape
Intermediate stroke (Exclusive body type)
With heavy-duty scraper
Grease for food processing equipment
Fluororubber seals
Piston rod/Retaining ring/Rod end nut
material: Stainless steel
With split pins for double clevis pin/
double knuckle joint pin and flat washers
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Lubrication
Piston speed
Allowable kinetic energy (J)
Stroke length tolerance
Bore size (mm)
32 40 50 63 80 100
Note) Stroke length tolerance does not include the amount of bumper change.
0.29 0.52 0.91 1.54 2.71 4.54
Double acting, Single rod
Air
1.5 MPa
1.0 MPa
0.05 MPa
Not required (Non-lube)
50 to 500 mm/s
Without auto switch: –10 to 70°C (No freezing)
With auto switch: –10 to 60°C (No freezing)
Specifications
+1.4 mm
0
Note)
Bore size Standard stroke
125, 150, 175, 200, 250, 300
32, 40, 50
63, 80, 100
(mm)
Standard Strokes
Type
Part no.
Refer to “How to Order” for the
standard model number. (P. 83)
Part no.: CQ2A50-166DCZ
CQ2B50-175DCZ with 9 mm
width spacer inside
The B dimension is 230.5 mm.
Part no.: CQ2B50-166DCZ-XB10
Makes 166 mm stroke tube.
The B dimension is 221.5 mm.
Strokes in 1 mm intervals are
available by installing a spacer in
the standard stroke cylinder.
Strokes in 1 mm intervals are
available by using an exclusive body
with the specified stroke.
Suffix “-XB10” to the end of
standard model number. (P. 83)
Description
Stroke range
Bore size
32 to 100
Stroke range
101 to 299
Bore size
32 to 100
Stroke range
101 to 299
Example
A spacer is installed in the standard stroke body. Exclusive body (-XB10)
Manufacture of Intermediate Strokes
32
쎲
Rc1/8
NPT1/8
G1/8
ø6/4
쎲
40
쎲
Rc1/8
NPT1/8
G1/8
ø6/4
쎲
50
쎲
Rc1/4
NPT1/4
G1/4
ø8/6
쎲
63
쎲
Rc1/4
NPT1/4
G1/4
ø8/6
쎲
80
쎲
Rc3/8
NPT3/8
G3/8
—
쎲
100
쎲
Rc3/8
NPT3/8
G3/8
—
쎲
Bore size (mm)
Pipe thread
Built-in one-touch fittings
Note)
Built-in magnet
Piping
Rod end male thread
Note) One-touch fittings cannot be replaced.
—
TN
TF
Type
Pneumatic
• Auto switch proper mounting position (detection at stroke end) and its mounting height
• Minimum stroke for auto switch mounting
• Operating range
• Auto switch mounting brackets/Part no.
Refer to pages 193 to 199 for the specifications of cylinders with autoswitches.
Standard
Large Bore
Size
Long Stroke
Non-rotating
Rod
Axial Piping
Anti-lateral
Load
With End Lock
Water
Resistant
Auto SwitchMade to Order
With Auto
Switch
Series CQ2
Compact Cylinder: Long Stroke
Double Acting, Single Rod
84