Datasheet

10 16
Bore size (mm)
JIS Symbol
Double acting, Single rod
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Piston speed
Allowable kinetic energy
50 to 750 mm/s
0.035 J 0.090 J
Specifications
Double acting, Single rod
Air
1 MPa
0.7 MPa
0.06 MPa
Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C
∗
Rubber bumper
Not required (Non-lube)
+1.0
0
∗ No freezing
Bore size
10
16
Standard stroke
15, 30, 45, 60, 75, 100, 125, 150
15, 30, 45, 60, 75, 100, 125, 150, 175, 200
Standard Stroke
(mm)
∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.)
—XA쏔
—XC22
—XC51
Change of rod end shape
Fluororubber seals
With hose nipple
Symbol
Specifications
Mass
(g)
Bore size (mm) 10
36
4
16
71.5
6.5
Basic mass
∗
Additional mass per each 15 mm of stroke
Refer to page 44 before handling.
Precautions
• Minimum stroke for auto switch mounting
• Proper auto switch mounting position (detection at stroke end) and mounting height
• Operating range
• Switch mounting bracket part no.
Refer to pages 117 to 123 for cylinders with auto switches.
Head Cover Port Location
Either perpendicular to the cylinder axis or in-line with the cylinder axis is available for
basic style.
Axial
Perpendicular
95
Made to Order Specifications
(For details, refer to pages 1380, 1462 and 1479.)
Series CJ2R
Air Cylinder: Direct Mount Type
Double Acting, Single Rod
Series CJ2R direct mount cylinder
can be installed directly through
the use of a square rod cover.
∗ Rod end nut is included in the basic mass.
Calculation: (Example) CJ2RA10-45
• Basic mass ·························· 36 (ø10)
• Additional mass ··················· 4/15 stroke
• Cylinder stroke ····················· 45 stroke
36 + 4/15 x 45 = 48 g
CJ1
CJP
CJ2
CM2
CG1
MB
MB1
CA2
CS1
CS2
Individual
-X쏔
D-쏔
-X쏔
Technical
data
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 95