Datasheet

10616
Bore size (mm)
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Piston speed
Allowable kinetic energy
50 to 750 mm/s
Specifications
Single acting, Spring return/Single acting, Spring extend
Air
1 MPa
0.7 MPa
Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C
∗
Rubber bumper/Air cushion
Not required (Non-lube)
+1.0
0
∗ No freezing
(mm)
0.2 MPa
0.25 MPa
Standard Stroke (N)
Spring Reaction Force
Bore size (mm)
6
10
16
Standard stroke
15, 30, 45, 60
15, 30, 45, 60
15, 30, 45, 60, 75, 100, 125, 150
Bore size
(mm)
6
10
16
Primary
Spring reaction force (N)
Secondary
3.72
6.86
14.2
1.77
3.53
6.86
∗
Manufacture of intermediate strokes at 1 mm intervals
is possible. (Spacers are not used.)
—XA쏔
—XC22
—XC51
Change of rod end shape
Fluororubber seals
With hose nipple
Symbol
Specifications
Spring extend
Spring return
JIS Symbol
Single acting,
Spring return
Single acting,
Spring extend
• Minimum stroke for auto switch mounting
• Proper auto switch mounting position (detection at stroke end) and mounting height
• Operating range
• Switch mounting bracket part no.
Refer to pages 117 to 123 for cylinders with auto switches.
0.012J 0.035J 0.090J
0.15 MPa
0.15 MPa
Rubber bumper
Air cushion
Spring with primary
mounting load
Spring with secondary
mounting load
When the spring is set
in the cylinder
When the spring is
contracted by applying air
IN OUT
61
Made to Order Specifications
(For details, refer to pages 1373 to 1498.)
Series CJ2
Air Cylinder: Standard Type
Single Acting, Spring Return/Extend
CJ1
CJP
CJ2
CM2
CG1
MB
MB1
CA2
CS1
CS2
Individual
-X쏔
D-쏔
-X쏔
Technical
data
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 61