Datasheet

Head Cover Port Location
Either perpendicular to the cylinder axis or in-line
with the cylinder axis is available for basic style.
Axial Perpendicular
Specifications
Bore size (mm)
Action
Lubricant
Lock operation
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Piston speed
Cushion
Stroke length tolerance
Mounting
16
Double acting, Single rod
Not required (Non-lube)
Spring locking (Exhaust locking)
Pneumatic locking (Pressure locking)
Spring and pneumatic locking
Air
1.05 MPa
0.7 MPa
0.08 MPa
50 to 500 mm/s
∗
Rubber bumper
Basic style, Axial foot style,
Rod side flange style, Double clevis style
Without auto switch: –10 to 70 C (No freezing)
With auto switch: –10 to 60 C (No freezing)
+ 1.0
0
Fine Lock Specifications
Fluid
Maximum operating pressure
Unlocking pressure
Lock starting pressure
Locking direction
Lock operation
Spring locking
(Exhaust locking)
Spring and
pneumatic locking
Pneumatic locking
(Pressure locking)
Air
0.5 MPa
Both directions
0.3 MPa or more
0.25 MPa or less
0.1 MPa or more
0.05 MPa or more
Standard Stroke/ (mm)
Bore size (mm)
16
Standard stroke
15, 30, 45, 60, 75, 100, 125, 150, 175, 200
Mounting Bracket and Accessory/For details, refer to page 607.
Mounting
Standard
equipment
Option
Mounting nut
Rod end nut
Clevis pin
Single knuckle joint
Double knuckle joint (With pin)
T-bracket
Basic style
Axial foot
style
Rod side
flange style
Double clevis
style
Mounting Bracket Part No.
Mounting bracket
Foot
Flange
T-bracket
∗
Part no.
CLJ-L016B
CLJ-F016B
CJ-T016B
∗ T-bracket is used with double clevis (D).
-XA
Change of rod end shape
Symbol
Specifications
∗ Pins and retaining rings are packaged together with double clevis and double knuckle joint.
∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.)
Refer to the minimum auto switch mounting stroke (page 609) for
those with an auto switch.
Refer to pages 608 to 610 for cylinders with
auto switches.
· Minimum auto switch mounting stroke
· Proper auto switch mounting position
(detection at stroke end) and mounting
height
· Operating range
· Switch mounting bracket: Part no.
Provided with a compact lock
mechanism, it is suitable for
intermediate stop, emergency
stop, and drop prevention.
Locking in both directions
The piston rod can be locked in either
direction of its cylinder stroke.
Maximum piston speed:
500 mm/s
It can be used at 50 to 500 mm/s provided
that it is within the allowable kinetic energy
range.
∗ Constraints associated with the allowable kinetic energy are imposed on the speeds at
which the piston can be locked.
The maximum speed of 750 mm/s can be accommodated if the piston is to be locked in
the stationary state for the purpose of drop prevention.
∗
602
Series CLJ2
Made to Order Specifications
(For details, refer to page 1836.)
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 602