Datasheet

ManualsBrandsSMC ManualsActuatorsAir Cylinder, Double Acting, Single Rod, 45mm, Bore Size 10mm M5

Series CJ2

Air Cylinder

ø6, ø10, ø16

Series Variations

Standard

Series CJ2

Non-rotating Rod

Series CJ2K

Built-in Speed Controller

Series CJ2Z

Low Friction

Series CJ2Q

Direct Mount

Series CJ2R

Direct Mount, Non-Rotating Rod

Series CJ2RK

End lock cylinder

Series CBJ2

Low-speed cylinder

Series CJ2X

110

102

106

Refer to Best

Pneumatics No. 3.

Improved wear resistance

The bearing portions of the rod cover and the

clevis have been improved in wear resistance

to ensure the longevity of the cylinder.

Reduced piston rod deflection

The clearance between the bushing and the piston

rod has been decreased to achieve higher accuracy,

thus decreasing the deflection of the piston rod.

Easy installation

The installation is simple because a tool

can be placed directly over the cover for

installation.

High speed actuation possible

Either the rubber bumper or the air

cushion can be selected according to the

drive speed conditions. Therefore, it can

support high speed drives.

쎲 Rubber bumper······50 to 750 mm/s

(Standard equipment)

쎲 Air cushion······50 to 1000 mm/s

Series

Action

Basic

Standard variations

Bore size

(mm)

Page

Built-in

magnet

With air

cushion

Clean

series

Copper and

fluorine-free

Rod

Single

acting

Double

acting

Double

acting

Double

acting

Single

acting

Single

acting

Single

acting

Double

acting

Double

acting

Double

acting

Single rod

Double

rod

Single rod

Double rod

Single rod

Double

acting

Single rod

Single rod,

Spring

return/

Spring

extend

Single rod,

(Spring return/

Spring extend)

Single rod,

(Spring return/

Spring extend)

Single rod,

(Spring return/

Spring extend)

CJ1

CJP

CJ2

CM2

CG1

MB1

CA2

CS1

CS2

Individual

-X쏔

D-쏔

-X쏔

Technical

data

P0015-P0124-E.qxd 08.10.2 3:59 PM Page 39

Summary of content (113 pages)

PAGE 1
P0015-P0124-E.qxd 08.10.2 3:59 PM Page 39 Air Cylinder Series CJ2 ø6, ø10, ø16 CJ1 CJP Improved wear resistance High speed actuation possible The bearing portions of the rod cover and the clevis have been improved in wear resistance to ensure the longevity of the cylinder. Either the rubber bumper or the air cushion can be selected according to the drive speed conditions. Therefore, it can support high speed drives.
PAGE 2
P0015-P0124-E.qxd 08.10.2 3:59 PM Page 40 Combinations of Standard Products and Made Series CJ2 : Standard : Made to Order specifications : Special product (Contact SMC for details.
PAGE 3
P0015-P0124-E.qxd 08.10.
PAGE 4
P0015-P0124-E.qxd 08.10.2 3:59 PM Page 42 Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 ø6, ø10, ø16 How to Order Bore size 6 6 mm 10 10 mm 16 16 mm Mounting style Built-in Magnet Cylinder Model Cylinder standard stroke (mm) Basic style B Axial foot style L Rod side flange style F D Double clevis style (Except ø6) Refer to the standard stroke table on page 43.
PAGE 5
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 43 Air Cylinder: Standard Type Double Acting, Single Rod CJ2 Series Specifications 6 Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid 1 MPa Proof pressure 10.7 MPa Maximum operating pressure Minimum operating pressure Rubber bumper 0.12 MPa 0.06 MPa — 0.
PAGE 6
P0015-P0124-E.qxd Page 44 CJ2 Mounting Style and Accessory/For details, refer to page 51. Basic style Option Axial foot style Double ∗ Rod side flange style clevis style Mounting nut Rod end nut Clevis pin Single knuckle joint Double knuckle joint ∗ T-bracket ∗ Pin and snap ring are shipped together with double clevis and double knuckle joint. Mounting Bracket Part No.
PAGE 7
P0015-P0124-E.qxd 08.10.
PAGE 8
P0015-P0124-E.qxd 08.10.2 4:00 PM Series Page 46 CJ2 Construction (Not able to disassemble) CJ2쏔6-R Piston Magnet Piston construction when auto switch is mounted. CJ2쏔10, CJ2쏔16 Piston Magnet Piston construction when auto switch is mounted. With air cushion Component Parts Description No. Dedicated for with Air Cushion Type Material Note No.
PAGE 9
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 47 Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 Basic Style (B) CJ2B Bore size Stroke Head cover port location CJ2B6 Mounting nut ∗ Rod end nut CJ1 Piping port M5 x 0.8 Piping port M5 x 0.8 0 0 B –0.3 8 –0.3 CJP CJ2 CM2 S + Stroke Z + Stroke CG1 Mounting nut ∗ CJ2B10, 16 Rod end nut Piping port 2 x M5 x 0.8 MB Piping port M5 x 0.8 0 B –0.
PAGE 10
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 48 CJ2 Series Axial Foot Style (L) CJ2L Bore size Stroke Head cover port location Mounting nut ∗ CJ2L6 Piping port M5 x 0.8 Rod end nut Cover surface Piping port 0 0 8 –0.3 B –0.3 M5 x 0.8 Rod cover side 2 x øLC Head cover side S + Stroke Z + Stroke Mounting hole Mounting nut ∗ CJ2L10, 16 Piping port Piping port 2 x M5 x 0.8 Rod end nut M5 x 0.8 0 B –0.
PAGE 11
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 49 Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 Rod Side Flange Style (F) CJ2F Bore size Stroke Head cover port location Mounting nut ∗ CJ2F6 Rod end nut Cover surface Piping port M5 x 0.8 Piping port 0 0 8 –0.3 B –0.3 M5 x 0.8 CJ1 CJP 2 x øFC Mounting hole Rod cover side S + Stroke Z + Stroke Head cover side CJ2 CM2 CJ2F10, 16 Mounting nut ∗ Cover surface Rod end nut CG1 Piping port M5 x 0.8 Piping port 2 x M5 x 0.
PAGE 12
P0015-P0124-E.qxd Series 08.10.2 4:00 PM Page 50 CJ2 Double Clevis Style (D) CJ2D Bore size Stroke Z + Stroke S + Stroke Rod end nut øCDH9 +0.030 0 0 0 B -0.3 CZ -0.3 Clevis pin (øcdd9 –0.030 –0.060 ) Piping port 2 x M5 x 0.8 T-bracket For details, refer to page 51. ZZ + Stroke ∗ Clevis pin and retaining ring are shipped together. With air cushion: CJ2D Bore size Stroke A Z + Stroke S + Stroke Rod end nut øCDH9 +0.030 0 Piping port 2 x M5 x 0.8 0 B -0.3 0 CZ -0.
PAGE 13
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 51 Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 Accessory Bracket Dimensions Clevis Pin Knuckle Pin 12 Single Knuckle Joint (mm) CJ1 CJP CJ2 Material: Stainless steel Material: Rolled steel Applicable Part no. bore (mm) I-J010B I-J016B H10 A1 L1 MM ND 10 16 8 21 M4 x 0.7 3.3 +0.048 0 8 25 M5 x 0.8 5.3+0.048 0 NX R1 U1 Applicable Part no. bore (mm) Applicable Dd9 d L l m t snap ring –0.030 –0.060 CD-J010 10 3.
PAGE 14
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 52 Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W ø6, ø10, ø16 How to Order Bore size 6 6 mm 10 10 mm 16 16 mm Mounting style Built-in Magnet Cylinder Model Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch. Cylinder standard stroke (mm) Refer to the standard stroke table on page 53.
PAGE 15
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 53 Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W Specifications Bore size (mm) 6 10 16 Double acting, Double rod Action Air Fluid 1 MPa Proof pressure 0.7 MPa Maximum operating pressure Minimum operating pressure 0.1 MPa Rubber bumper Air cushion Ambient and fluid temperature — 0.
PAGE 16
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 54 CJ2W Series Mounting Style and Accessory/For details, refer to page 51. Standard equipment Option Mass (g) 6 10 16 Mounting nut Bore size (mm) Basic mass ∗ 27 35 Rod end nut Additional mass per each 15 mm of stroke 3 Mounting Basic style Foot style Mounting bracket mass Single knuckle joint Double knuckle joint ∗ ∗ Knuckle pin and retaining ring are shipped together with double knuckle joint. Mounting Bracket Part No.
PAGE 17
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 55 Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W Clean Series 10-CJ2W Mounting style Bore size Stroke Specifications Action Clean Series Bore size (mm) Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator’s rod section having a double seal construction.
PAGE 18
P0015-P0124-E.qxd Series 08.10.2 4:00 PM Page 56 CJ2W Construction (Not able to disassemble) With air cushion Component Parts Description No. Dedicated for with Air Cushion Type Description Material Note No.
PAGE 19
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 57 Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W Basic Style (B) CJ2WB Bore size Stroke Mounting nut ∗ CJ2WB6 Rod cover Piping port 2 x M5 x 0.8 Rod end nut 0 B -0.3 CJ1 CJP S + Stroke Z + 2 x Stroke CJ2 Mounting nut ∗ CM2 Rod end nut CG1 Piping port 2 x M5 x 0.8 0 B –0.3 MB MB1 H + Stroke S + Stroke CA2 Z + 2 x Stroke CS1 CS2 With air cushion: CJ2WB Bore size Stroke A Mounting nut ∗ Rod end nut 0 B –0.
PAGE 20
P0015-P0124-E.qxd Series 08.10.2 4:00 PM Page 58 CJ2W Foot Style (L) CJ2WL Bore size Stroke Mounting nut ∗ Rod end nut Piping port 2 x M5 x 0.8 S + Stroke Z + 2 x Stroke Rod end nut Piping port 2 x M5 x 0.8 Cover surface Mounting nut ∗ H + Stroke S + Stroke 2 x øLC Mounting hole Z + 2 x Stroke With air cushion: CJ2WL Bore size Stroke A Mounting nut ∗ Rod end nut Piping port 2 x M5 x 0.8 Cover surface S + Stroke Z + 2 x Stroke Rod End Nut Material: Iron Applicable Part no.
PAGE 21
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 59 Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W Flange Style (F) CJ2WF Bore size Stroke Mounting nut ∗ Piping port 2 x M5 x 0.8 CJ1 CJP Rod end nut CJ2 S + Stroke Z + 2 x Stroke Rod end nut Cover surface CM2 Piping port 2 x M5 x 0.8 CG1 MB 2 x øFC MB1 Mounting hole S + Stroke H + Stroke CA2 Z + 2 x Stroke CS1 With air cushion: CJ2WF Bore size CS2 Stroke A Mounting nut ∗ Rod end nut Piping port 2 x M5 x 0.
PAGE 22
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 60 Air Cylinder: Standard Type Single Acting, Spring Return/Extend Series CJ2 ø6, ø10, ø16 How to Order Bore size Spring extend 6 6 mm 10 10 mm 16 16 mm Spring return Built-in Magnet Cylinder Model Cylinder standard stroke (mm) Mounting style Refer to the standard stroke table on page 61.
PAGE 23
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 61 Air Cylinder: Standard Type Single Acting, Spring Return/Extend CJ2 Series Specifications Bore size (mm) 6 10 16 Single acting, Spring return/Single acting, Spring extend Action Air Fluid 1 MPa Proof pressure 0.7 MPa Maximum operating pressure Minimum operating pressure Rubber bumper Air cushion Spring extend 0.2 MPa 0.15 MPa 0.25 MPa 0.
PAGE 24
P0015-P0124-E.qxd 08.10.
PAGE 25
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 63 Air Cylinder: Standard Type Single Acting, Spring Return/Extend Series CJ2 Construction (Not able to disassemble) Single acting, Spring return CJ1 CJP CJ2쏔6 Piston/Head cover CJ2 CM2 Single acting, Spring extend CG1 MB MB1 CA2 CS1 CS2 CJ2쏔6 Piston/Rod cover Component Parts No. 1 2 3 4 5 6 7 8 Material Note No.
PAGE 26
P0015-P0124-E.qxd 08.10.2 4:01 PM Series Page 64 CJ2 Single Acting, Spring Return: Basic Style (B) CJ2B Bore size Stroke S Head cover port location Mounting nut ∗ Piping port Piping port M5 x 0.8 M5 x 0.8 0 B –0.3 Rod end nut Head cover port location: Axial location (R) S + Stroke Z + Stroke ∗ For details of the mounting nut, refer to page 51. Bore size A (mm) (mm) S∗ B C D F GB H MM NA NB ND h8 6 15 8 9 3 8 – 28 M3 x 0.5 10 16 15 15 12 18.
PAGE 27
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 65 Air Cylinder: Standard Type Single Acting, Spring Return/Extend Series CJ2 Single Acting, Spring Return: Rod Side Flange Style (F) CJ2F Bore size Stroke S Head cover port location Mounting nut ∗ Rod end nut Piping port Cover surface Head cover port location: Axial location (R) 0 B –0.3 M5 x 0.8 CJ1 2 x øFC Mounting hole Piping port CJP M5 x 0.8 S + Stroke Z + Stroke CJ2 ∗ For details of the mounting nut, refer to page 51.
PAGE 28
P0015-P0124-E.qxd 08.10.2 4:01 PM Series Page 66 CJ2 Single Acting, Spring Extend: Basic Style (B) Mounting nut ∗ CJ2B Bore size Stroke T Piping port M5 x 0.8 0 8 -0.3 0 B -0.3 CJ2B6 H + Stroke Rod end nut S + Stroke Z + 2 x Stroke Mounting nut ∗ CJ2B10, 16 0 B -0.3 Piping port M5 x 0.8 H + Stroke Rod end nut S + Stroke Z + 2 x Stroke ∗ For details of the mounting nut, refer to page 51. Bore size (mm) 6 10 16 A B C D F GA H 15 12 14 15 12 14 15 18.
PAGE 29
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 67 Air Cylinder: Standard Type Single Acting, Spring Return/Extend Series CJ2 Single Acting, Spring Extend: Rod Side Flange Style (F) CJ2F Bore size Stroke T CJ2F6 Mounting nut ∗ Piping port M5 x 0.8 0 8 –0.3 0 B –0.3 Cover surface 2 x øFC Rod cover side Mounting hole Mounting nut ∗ Rod End Nut Piping port M5 x 0.8 CJ2 CM2 0 B –0.
PAGE 30
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 68 Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod Series CJ2K ø10, ø16 How to Order Built-in Magnet Cylinder Model Mounting style Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch.
PAGE 31
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 69 Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod Series CJ2K Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. Bore size (mm) 10 Action 16 Double acting, Single rod Air Fluid 1 MPa Proof pressure Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Can operate without lubrication. Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 32
P0015-P0124-E.qxd Series 08.10.2 4:01 PM Page 70 CJ2K Mass Specific Product Precautions Be sure to read before handling. Refer to front matters 54 and 55 for Safety Instructions and pages 3 to 11 for Actuator and Auto Switch Precautions. (g) Bore size (mm) Caution Allowable rotational torque (N·m) ø10 ø16 0.02 0.04 4.
PAGE 33
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 71 Air Cylinder: Non-rotating Rod Type Double Acting, Single Rod Series CJ2K Basic Style (B) CJ2KB Bore size Stroke Head cover port location Mounting nut ∗ Piping port M5 x 0.8 Rod end nut Piping port 2 x M5 x 0.8 0 BA –0.3 0 BB -0.3 CJ1 CJP CJ2 S + Stroke Rod section Z + Stroke Head cover port location: Axial location (R) CM2 CG1 ∗ Refer to page 51 for details of the mounting nut.
PAGE 34
P0015-P0124-E.qxd Series 08.10.2 4:01 PM Page 72 CJ2K Rod Side Flange Style (F) 0 BA –0.3 CJ2KF Bore size Stroke Head cover port location Rod cover side Mounting nut ∗ Piping port 2 x M5 x 0.8 Cover surface Piping port M5 x 0.8 0 BB –0.3 Rod end nut 2 x øFC Mounting hole Rod section Head cover port location: Axial location (R) S + Stroke Z + Stroke ∗ Refer to page 51 for details of the mounting nut.
PAGE 35
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 73 Air Cylinder: Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2K ø10, ø16 How to Order CJ1 Bore size Spring extend CJP 10 10 mm 16 16 mm Spring return Built-in Magnet Cylinder Model Cylinder standard stroke (mm) Refer to the standard stroke table on page 74.
PAGE 36
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 74 CJ2K Series Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. Bore size (mm) 10 16 Single acting, Spring return/Single acting, Spring extend Action Air Fluid 1 MPa Proof pressure Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Can operate without lubrication. Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 37
P0015-P0124-E.qxd 08.10.
PAGE 38
P0015-P0124-E.qxd Series 08.10.2 4:01 PM Page 76 CJ2K Single Acting, Spring Return: Basic Style (B) CJ2KB Bore size Stroke S Head cover port location Piping port M5 x 0.8 Piping port M5 x 0.8 Mounting nut ∗ 0 BA –0.3 0 BB –0.3 Rod end nut S + Stroke Z + Stroke Rod section Head cover port location: Axial location (R) ∗ Refer to page 51 for details of the mounting nut.
PAGE 39
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 77 Air Cylinder: Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2K Single Acting, Spring Return: Rod Side Flange Style (F) 0 BA –0.3 CJ2KF Bore size Stroke S Head cover port location Rod cover side Mounting nut ∗ Rod end nut Piping port M5 x 0.8 Piping port M5 x 0.8 CJ1 CJP 0 BB –0.
PAGE 40
P0015-P0124-E.qxd Series 08.10.2 4:01 PM Page 78 CJ2K Single Acting, Spring Extend: Basic Style (B) CJ2KB Bore size Stroke T Mounting nut ∗ Piping port M5 x 0.8 0 BA –0.3 0 BB –0.3 Rod end nut S + Stroke Z + 2 x Stroke H + Stroke Rod section ∗ Refer to page 51 for details of the mounting nut. (SNJ-016B for ø10, SNKJ-016B for ø16) (mm) Bore size A BA BB CA CB F GA H KA MM NA NB NDh8 NN 10 16 15 15 12 17 14 8 8 28 4.2 M4 x 0.7 12.5 5.5 0 10 –0.022 M10 x 1.0 15 18.
PAGE 41
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 79 Air Cylinder: Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2K Single Acting, Spring Extend: Rod Side Flange Style (F) 0 BA -0.3 CJ2KF Bore size Stroke T Rod cover side Mounting nut ∗ Cover surface CJ1 Piping port M5 x 0.8 BB -0.3 Rod end nut 0 CJP CJ2 2 x øFC Mounting hole H + Stroke S + Stroke Rod sedtion CM2 Z + 2 x Stroke CG1 ∗ Refer to page 51 for details of the mounting nut.
PAGE 42
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 80 Air Cylinder: Built-in Speed Controller Type Double Acting, Single Rod Series CJ2Z ø10, ø16 How to Order Bore size Built-in Magnet Cylinder Model 10 10 mm 16 16 mm Mounting style B L F D Basic style Cylinder standard stroke (mm) Axial foot style Refer to the standard stroke table on page 81.
PAGE 43
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 81 Air Cylinder: Built-in Speed Controller Type Double Acting, Single Rod Series CJ2Z Specifications Space-saving air cylinder with speed controller built-in cylinder cover Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid 1 MPa Proof pressure Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 44
P0015-P0124-E.qxd Series 08.10.2 4:01 PM Page 82 CJ2Z Mass (g) Bore size (mm) 10 16 Basic mass ∗ 40 73 Additional mass per each 15 mm of stroke 4 6.5 Axial foot style 8 20 Rod side flange style Double clevis style ∗ (With pin) 5 15 4 10 Mounting bracket mass ∗ Mounting nut and rod end nut are included in the basic mass. ∗∗ Mounting nut is not attached to the double clevis style, so the mounting nut mass is already subtracted.
PAGE 45
P0015-P0124-E.qxd 08.10.2 4:01 PM Page 83 Air Cylinder: Built-in Speed Controller Type Double Acting, Single Rod CJ2Z Series Basic Style (B) CJ2ZB Bore size Stroke Head cover port location CJ1 Mounting nut ∗ Piping port Piping port 2 x M5 x 0.8 CJP 0 B -0.3 M5 x 0.8 CJ2 CM2 Head cover port location: Axial location (R) S + Stroke Z + Stroke Rod end nut CG1 ∗ For details of the mounting nut, refer to page 51. (mm) Bore size A B C D F GA GB H MM NA NB 10 16 15 15 17 4 8 7.
PAGE 46
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 84 CJ2Z Series Rod Side Flange Style (F) CJ2ZF Bore size Stroke Head cover port location Mounting nut ∗ Piping port 2 x M5 x 0.8 Cover surface Piping port 0 B -0.3 M5 x 0.8 2 x øFC Mounting hole Head cover port location: Axial location (R) S + Stroke Z + Stroke Rod end nut ∗ For details of the mounting nut, refer to page 51. (mm) Bore size A B C D F FB FC FT FX FY FZ GA GB H MM NA NB 10 16 15 15 17 4 8 14.5 4.5 1.6 24 14 32 7.
PAGE 47
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 85 Air Cylinder: Built-in Speed Controller Type Double Acting, Double Rod Series CJ2ZW ø10, ø16 How to Order CJ1 Bore size Cylinder standard stroke (mm) 10 10 mm 16 16 mm Refer to the standard stroke table on page 86. Built-in Magnet Cylinder Model Mounting style B Basic style L Foot style F Flange style CJ2 Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch.
PAGE 48
P0015-P0124-E.qxd Series 08.10.2 4:02 PM Page 86 CJ2ZW Specifications Space-saving air cylinder with speed controller built-in cylinder cover Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid 1 MPa Proof pressure Maximum operating pressure 0.7 MPa Minimum operating pressure 0.1 MPa Ambient and fluid temperature Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C Cushion Rubber bumper Lubrication Not required (Non-lube) +1.
PAGE 49
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 87 Air Cylinder: Built-in Speed Controller Type Double Acting, Double Rod Mass (g) 10 16 Basic mass ∗ 50 85 Additional mass per each 15 mm of stroke 6 9 Foot style 16 40 Flange style 5 15 Bore size (mm) Mounting bracket mass ∗ Rod end nut are included in the basic mass.
PAGE 50
P0015-P0124-E.qxd Series 08.10.2 4:02 PM Page 88 CJ2ZW Basic Style (B) CJ2ZWB Bore size Stroke Mounting nut ∗ 0 B –0.3 Piping port 2 x M5 x 0.8 S + Stroke Rod end nut H + Stroke Z + 2 x Stroke ∗ For details of the mounting nut, refer to page 51. (mm) Bore size A B C D F GA H MM NA NDh8 10 16 15 15 15 18.3 17 20 4 5 8 8 7.5 7.5 28 28 M4 x 0.7 M5 x 0.8 21 21 8 0 –0.022 0 10 –0.022 NN S WA WW Z M8 x 1.0 M10 x 1.0 66 67 14.5 14.5 4.5 5.
PAGE 51
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 89 Air Cylinder: Built-in Speed Controller Type Double Acting, Double Rod CJ2ZW Series Flange Style (F) CJ2ZWF Bore size Stroke 2 x øFC Mounting hole Cover surface CJ1 Mounting nut ∗ CJP Piping port 2 x M5 x 0.8 CJ2 CM2 S + Stroke Z + 2 x Stroke Rod end nut CG1 H + Stroke MB MB1 Rod End Nut CA2 CS1 CS2 Material: Iron Applicable Part no. bore (mm) NTJ-010A NTJ-015A 10 16 B C d H 7 8 8.1 9.2 M4 x 0.7 M5 x 0.8 3.
PAGE 52
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 90 Air Cylinder: Low Friction Type Double Acting, Single Rod Series CJ2Q ø10, ø16 How to Order Bore size Cylinder standard stroke (mm) 10 10 mm 16 16 mm Refer to the standard stroke table on page 91. Built-in Magnet Cylinder Model Mounting style Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch.
PAGE 53
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 91 Air Cylinder: Low Friction Type Double Acting, Single Rod Series CJ2Q Application Example Specially designed to keep friction of the piston to a minimum. Suitable for contact-pressure control requiring smooth operation at low pressures. Low friction cylinder is used in combination with precision regulator (Series IR). Driving roller Winding roller Precision regulator Precision regulator Low sliding resistance CJ1 Minimum operating pressure: 0.
PAGE 54
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 92 CJ2Q Series Head Cover Port Location Mounting Style and Accessory/For details, refer to page 51. Basic style Option Standard equipment Mounting Rod side Double ∗ Axial clevis flange foot style style style Either perpendicular to the cylinder axis or in-line with the cylinder axis is available for basic style.
PAGE 55
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 93 Air Cylinder: Low Friction Type Double Acting, Single Rod CJ2Q Series Construction (Not able to disassemble) CJ1 CJP CJ2 CM2 CG1 Component Parts No. 1 2 3 4 5 6 Description Rod cover Head cover Cylinder tube Piston rod Piston Mounting nut MB Material Aluminum alloy Aluminum alloy Stainless steel Stainless steel Brass Brass No.
PAGE 56
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 94 Air Cylinder: Direct Mount Type Double Acting, Single Rod Series CJ2R ø10, ø16 How to Order Bore size Cylinder standard stroke (mm) 10 10 mm 16 16 mm Refer to the standard stroke table on page 95. Built-in Magnet Cylinder Model Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch.
PAGE 57
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 95 Air Cylinder: Direct Mount Type Double Acting, Single Rod Series CJ2R Specifications Series CJ2R direct mount cylinder can be installed directly through the use of a square rod cover. Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid 1 MPa Proof pressure Maximum operating pressure 0.7 MPa Minimum operating pressure Ambient and fluid temperature 0.
PAGE 58
P0015-P0124-E.qxd Series 08.10.2 4:02 PM Page 96 CJ2R Copper and Fluorine-free Air Cylinder (For CRT manufacturing process) Clean Series 10-CJ2RA Bore size Stroke Head cover port location 20-CJ2RA Bore size Stroke Head cover port location Copper and fluorine-free Clean Series Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator’s rod section having a double seal construction.
PAGE 59
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 97 Air Cylinder: Direct Mount Type Double Acting, Single Rod CJ2R Series Construction (Not able to disassemble) CJ1 CJP CJ2 CM2 CG1 MB MB1 Component Parts No. 1 2 3 4 5 6 Description Rod cover Head cover Cylinder tube Piston rod Piston Rod end nut Material Aluminum alloy Aluminum alloy Stainless steel Stainless steel Brass Rolled steel No.
PAGE 60
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 98 Air Cylinder: Direct Mount Type Single Acting, Spring Return/Extend Series CJ2R ø10, ø16 How to Order Cylinder standard stroke (mm) Bore size Refer to the standard stroke table on page 99.
PAGE 61
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 99 Air Cylinder: Direct Mount Type Single Acting, Spring Return/Extend CJ2R Series Specifications Series CJ2R direct mount cylinder can be installed directly through the use of a square rod cover. Bore size (mm) 10 Action 16 Single acting, Spring return/Single acting, Spring extend Fluid Air Proof pressure 1 MPa Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 62
P0015-P0124-E.qxd Series 08.10.2 4:02 PM Page 100 CJ2R Copper and Fluorine-free Air Cylinder (For CRT manufacturing process) Mass Spring Return (g) 10 16 15 stroke 38 73 30 stroke 45 90 45 stroke 54 112 60 stroke 63 134 75 stroke — 155 100 stroke — 198 125 stroke — 234 150 stroke — 260 Bore size (mm) Mass ∗ 10 Bore size (mm) Action Mass ∗ 0.7 MPa Min. operating pressure 0.
PAGE 63
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 101 Air Cylinder: Direct Mount Type Single Acting, Spring Return/Extend CJ2R Series Single Acting: Bottom Mounting Style Spring return: CJ2RA Bore size Stroke S Head cover port location Piping port M5 x 0.8 Breathing hole 0 B –0.3 Piping port M5 x 0.8 CJ1 Rod end nut CJP Head cover port location: Axial location (R) S + Stroke Z + Stroke CJ2 CM2 Spring extend: CJ2RA Bore size Stroke T CG1 MB X + Stroke Piping port M5 x 0.
PAGE 64
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 102 Air Cylinder: Direct Mount, Non-rotating Rod Type Double Acting, Single Rod Series CJ2RK ø10, ø16 How to Order Cylinder standard stroke (mm) Refer to the standard stroke table on page 103. Bore size Built-in Magnet Cylinder Model 10 10 mm 16 16 mm Suffix the symbol “-A” (Rail mounting style) or “-B” (Band mounting style) to the end of part number for cylinder with auto switch.
PAGE 65
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 103 Air Cylinder: Direct Mount, Non-rotating Rod Type Double Acting, Single Rod Series CJ2RK Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid 1 MPa Proof pressure Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 66
P0015-P0124-E.qxd Series 08.10.2 4:02 PM Page 104 CJ2RK Copper and Fluorine-free Air Cylinder (For CRT manufacturing process) Caution Caution on Handling 20-CJ2RK Bore size Stroke Head cover port location Copper and fluorine-free Eliminates the effects by copper based ions and fluorine based resins, etc. over the color cathode ray tube.
PAGE 67
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 105 Air Cylinder: Direct Mount, Non-rotating Rod Type Double Acting, Single Rod CJ2RK Series Construction (Not able to disassemble) CJ1 CJP CJ2 CM2 CG1 Component Parts No. 1 2 3 4 5 6 Description Material Aluminum alloy Aluminum alloy Stainless steel Stainless steel Brass Rolled steel Rod cover Head cover Cylinder tube Piston rod Piston Rod end nut No.
PAGE 68
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 106 Air Cylinder: Direct Mount, Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2RK ø10, ø16 How to Order Cylinder standard stroke (mm) Refer to the standard stroke table on page 107.
PAGE 69
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 107 Air Cylinder: Direct Mount, Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2RK Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Can operate without lubrication. Bore size (mm) 10 16 Single acting, Spring return/Single acting, Spring extend Action Air Fluid Proof pressure 1 MPa Maximum operating pressure 0.
PAGE 70
P0015-P0124-E.qxd Series 08.10.
PAGE 71
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 109 Air Cylinder: Direct Mount, Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2RK Single Acting: Bottom Mounting Style Spring return: CJ2RK Bore size Stroke S Head cover port location Rod end nut Piping port M5 x 0.8 Breathing hole Piping port 0 B –0.
PAGE 72
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 110 Air Cylinder: With End Lock Series CBJ2 ø16 How to Order Cylinder standard stroke (mm) Refer to the standard stroke table on page 111. Lock position Mounting Style B L F D H R Basic style Axial foot style Head end lock Rod end lock Rod side flange style Example Double clevis style Note) Note) Rod end lock only.
PAGE 73
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 111 Air Cylinder: With End Lock Series CBJ2 Specifications Series CJ2 air cylinder is equipped with end lock function. 16 Bore size (mm) Double acting, Single rod Action Air Fluid 1 MPa Proof pressure Maximum operating pressure Minimum operating pressure Ambient and fluid temperature Cushion 0.7 MPa 0.15 MPa ∗∗ Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C ∗ Lubrication CJP Not required (Non-lube) +1.
PAGE 74
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 112 Series CBJ2 Specific Product Precautions Be sure to read before handling. Please consult with SMC for products outside these specifications. Use Recommended Air Pressure Circuit. Caution Operating Pressure Caution • It is necessary for proper locking and unlocking. Supply air pressure of 0.15 MPa or higher to the port on the side that has the lock mechanism, as it is necessary for disengaging the lock.
PAGE 75
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 113 Air Cylinder: With End Lock Series CBJ2 Dimensions 20 M10 x 1 M5 x 0.8 0 18.3 –0.3 20.3 ø -RN 0 ø10 h8-0.022 Basic style With rod end lock: C쏔BJ2B16- 14.5 CJ1 5 Piping port 2 x M5 x 0.8 CJP ø6 CJ2 0 18.3 –0.3 CM2 8 15 CG1 9.5 21 55.5 + Stroke 28 MB 83.5 + Stroke MB1 CA2 CS1 CS2 -HN 2 x M10 x 1 M5 x 0.8 0 0 18.3 –0.3 Piping port 2 x M5 x 0.8 ø5 ø5 0 18.3 –0.3 ø2 6 8 19.8 0 ø10 h8-0.022 With head end lock: C쏔BJ2B16- 12.
PAGE 76
P0015-P0124-E.qxd Series 08.10.2 4:03 PM Page 114 CBJ2 Dimensions Flange style With rod end lock: C쏔BJ2F16- -RN 14.5 Piping port 2 x M5 x 0.8 M10 x 1 M5 x 0.8 5 ø6 0 ø2 19 20 0 18.3 –0.3 20.3 Cover side (Head side) 33 42 2 x ø5.5 Mounting hole 8 15 2.3 21 With head end lock: C쏔BJ2F16- 0 18.3 –0.3 9.5 55.5 + Stroke 83.5 + Stroke 28 Cover outside diameter -HN 8 Piping port 2 x M5 x 0.8 0 ø2 19 20 0 18.3 –0.3 19.8 2 x M10 x 1 M5 x 0.
PAGE 77
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 115 Air Cylinder: With End Lock Axial foot style With rod end lock: C쏔BJ2L16- Series CBJ2 -RN 14.5 M10 x 1 M5 x 0.8 Piping port 2 x M5 x 0.8 8 CJ1 5 0 6 33 42 0 18.3 –0.3 CJ2 CM2 2.3 14 23 25 CJP ø2 20.3 ø6 Cover side (Head side) 9 21 15 CG1 0 18.3 –0.3 9.5 55.5 + Stroke 83.5 + Stroke 28 2 x ø5.5 Mounting hole MB MB1 CA2 CS1 CS2 With head end lock: C쏔BJ2L16- -HN Piping port 2 x M5 x 0.8 8 6 8 ø2 6 33 42 0 18.3 –0.3 9 12.
PAGE 78
P0015-P0124-E.qxd Series 08.10.2 4:03 PM Page 116 CBJ2 Dimensions Double clevis style With rod end lock: C쏔BJ2D16- -RN 14.5 20.3 0 ø2 ø6 0 18.3 –0.3 15 +0.2 6.5 +0.1 21 28 116 ø5H9+0.030 0 –0.030 Clevis pin (ø5d9–0.060 ) 27.5 23 M5 x 0.8 0 ø2 0 18.3 –0.3 Piping port 2 x M5 x 0.8 55.5 + Stroke 93.5 + Stroke 101.5 + Stroke 18.3 10 8 0 –0.
PAGE 79
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 117 Air Cylinder Series CJ2 Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height Solid State Auto Switch D-M9쏔 type D-M9쏔W type Reed Auto Switch D-A9쏔 type ≅Hs ≅Hs Auto switch 17 17 Auto switch A 22 (24.
PAGE 80
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 118 CJ2 Series Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height D-A9쏔 type Auto switch ≅Hs ≅Hs Auto switch D-M9쏔 type D-M9쏔W type 12.5 A 12.5 23.5 (26) B 12.5 12.5 A 23.5 B ( ): Values for D-A93 D-A9쏔V type Auto switch ≅Hs ≅Hs Auto switch D-M9쏔V type D-M9쏔WV type 12.5 A 12.5 23.5 D-A7쏔/A80 type B ≅Hs Auto switch 14.
PAGE 81
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 119 Series Air Cylinder CJ2 Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height Proper Auto Switch Mounting Position (Single acting type excluded) 6 10 16 D-C7쏔 D-C80 D-C73C D-C80C D-M9쏔 D-M9쏔W D-A9쏔 Bore size (mm) Band mounting Auto switch model D-H7쏔 D-H7C D-H7NF D-H7쏔W D-H7BAL A B A B A B A B 1.5 (8) 1.5 (0) 5.5 (12) 5.5 (4) 2 (8.5) 2 (0.5) 1 (7.5) 1 (0) 2 2 6 6 2.5 2.5 1.5 1.5 2.5 2.5 6.5 6.
PAGE 82
P0015-P0124-E.qxd Series 08.10.
PAGE 83
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 121 Air Cylinder Series CJ2 Proper Auto Switch Mounting Position (Detection at stroke end) and Mounting Height Single Acting, Spring Extend Type (T) Proper auto switch mounting position: Spring extend type (T) • Standard type (CDJ2쏔쏔쏔-쏔T) • Non-rotating rod type (CDJ2K쏔쏔쏔-쏔T) • Direct mount type (CDJ2R쏔쏔쏔-쏔T) • Non-rotating rod/Direct mount type (CDJ2RK쏔쏔쏔-쏔T) Auto switch model Band mounting D-A9첸 D-M9첸 D-M9첸W A 6 1.5 8 17 21 35 10 2 8.
PAGE 84
P0015-P0124-E.qxd Series 08.10.2 4:03 PM Page 122 CJ2 Minimum Auto Switch Mounting Stroke (mm) No. of auto switch mounted Auto switch mounting Band mounting Auto switch model Different surfaces n pcs. (n: No. of auto switch) Same surface Different surfaces Same surface (n-2) 15 + 35 2 (n = 2, 4, 6···) 45 + 15 (n-2) (n-2) 2 (n = 2, 4, 6···) 50 + 20 (n-2) (n-2) 2 (n = 2, 4, 6···) 60 + 22.5 (n-2) (n-2) 2 (n = 2, 4, 6···) 50 + 27.
PAGE 85
P0015-P0124-E.qxd 08.10.2 4:03 PM Page 123 Air Cylinder Operating range Series CJ2 Auto Switch Mounting Bracket: Part No. (mm) Rail mounting Band mounting Auto switch model Bore size 6 10 16 D-A9첸 4.5 6 7 D-M9첸 D-M9첸W 2 2.5 3 6 7 7 3 4 4 D-C7첸/C80/C73C/C80C D-H7첸/H7첸W D-H7BAL/H7NF D-H7C D-A9첸/A9첸V D-M9첸/M9첸V D-M9첸W/M9첸WV D-M9첸AL/M9첸ALV 5 8 9 — 6 6.5 — 3 3.
PAGE 86
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1114 Low Speed Cylinder Double Acting, Single Rod Series CJ2X ø10, ø16 How to Order Bore size Standard stroke (mm) ø10 15, 30, 45, 60, 75, 100, 125, 150 ø16 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 10 10 mm 16 16 mm ∗ Intermediate stroke other than above is manufactured upon receipt of order.
PAGE 87
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1115 Low Speed Cylinder Double Acting, Single Rod Series CJ2X Specifications Bore size (mm) 10 16 Double acting, Single rod Action Air Fluid Proof pressure 1.05 MPa Maximum operating pressure 10.7 MPa 0.
PAGE 88
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1116 Series CJ2X Basic Style (B) CJ2XB Bore size Stroke Port location on head cover Mounting nut ∗ CJ2XB10, 16 Rod end nut Piping port 2 x M5 x 0.8 0 B -0.3 Piping port M5 x 0.8 Port location on head cover: Axial location (R) S + Stroke Z + Stroke ∗ For details of the mounting nut, refer to page 1118. (mm) Bore size (mm) A B C D F GA GB H MM NA NB NDh8 NN S T Z 10 16 15 12 14 4 8 8 5 28 M4 x 0.7 12.5 9.5 0 8 –0.022 M8 x 1.
PAGE 89
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1117 Low Speed Cylinder Double Acting, Single Rod Series CJ2X Rod Side Flange Style (F) CJ2XF Bore size Stroke Port location on head cover CJ2XF10, 16 Mounting nut ∗ Rod end nut Piping port M5 x 0.8 Piping port 2 x M5 x 0.8 0 B -0.3 Cover surface Mounting hole Port location on head cover: Axial location (R) S + Stroke Z + Stroke ∗ For details of the mounting nut, refer to page 1118.
PAGE 90
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1118 Series CJ2X Accessory Bracket Dimensions Clevis Pin Knuckle Pin 12 Single Knuckle Joint (mm) Material: Rolled steel Part no. Applicable bore I-J010B I-J016B 10 16 H10 A1 L1 MM ND 8 21 M4 x 0.7 3.3 +0.048 0 8 25 M5 x 0.8 +0.048 5.3 0 Material: Stainless steel NX R1 U1 Part no. Applicable bore 3.1 8 CD-J010 9 6.4 12 14 Double Knuckle Joint CD-Z015 Dd9 d L l m t 10 3.3 –0.030 –0.060 16 –0.030 5.3 –0.
PAGE 91
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1119 Low Speed Cylinder Double Acting, Single Rod Series CJ2X Auto Switch Proper Mounting Position (Detection at Stroke End) and Its Mounting Height Reed auto switch Solid state auto switch D-A9 D-M9 D-M9 W ≅ Hs ≅ Hs Auto switch 17 17 Auto switch A B 22 (24.
PAGE 92
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1120 Series CJ2X Auto Switch Proper Mounting Position (Detection at Stroke End) and Its Mounting Height Reed auto switch Solid state auto switch D-A9 D-M9 D-M9 W Auto switch 12.5 ≅ Hs ≅ Hs Auto switch 12.5 A 23.5 (26) ( B A D-M9 V D-M9 WV 23.5 ≅ Hs 12.5 A 23.5 B D-A7 /A80 Auto switch 14.5 D-F7 /J79 D-F7 W/J79W D-F79F Minimum lead wire bending radius 10 Auto switch A 21.
PAGE 93
P1111-P1166-E.qxd 08.11.
PAGE 94
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1122 Series CJ2X Minimum Auto Switch Mounting Stroke (mm) No. of auto switch mounted Auto switch mounting Auto switch model 2 pcs. 1 pc. Different surfaces n pcs. (n: No. of auto switch) Same surface Same surface (n-2) 2 (n = 2, 4, 6···) 45 + 15 (n-2) (n-2) 2 (n = 2, 4, 6···) 50 + 20 (n-2) (n-2) 2 (n = 2, 4, 6···) 60 + 22.5 (n-2) (n-2) 2 (n = 2, 4, 6···) 50 + 27.
PAGE 95
P1111-P1166-E.qxd 08.11.17 3:24 PM Page 1123 Low Speed Cylinder Double Acting, Single Rod Operating Range Series CJ2X Auto Switch Mounting Bracket/Part No. (mm) Rail mounting Band mounting Auto switch model Bore size (mm) 10 16 D-A9 6 7 D-M9 D-M9 W 2.5 3 7 7 4 4 Auto switch mounting Bore size Auto switch model ø10 ø16 Note 1), Note 2) Note 1), Note 2) qBJ2-010 wBJ3-1 D-C7 /C80/C73C/C80C D-H7 /H7 W D-H7NF D-H7C D-A9 /A9 V 8 9 6 6.5 D-M9 /M9 V D-M9 W/M9 WV 3 3.
PAGE 96
P1111-P1166-E.qxd 08.11.17 3:25 PM Page 1165 Related Products: Speed Controller for Low Speed Operation The effective area of controlled flow is approximately 1/10 of the standard type. These controllers are suitable for controlling the speed of microspeed cylinders. The dual type speed controller is especially suitable for cylinders with a small bore size.
PAGE 97
P1111-P1166-E.qxd 08.11.17 3:25 PM Page 1166 Low Speed Cylinder Specific Product Precautions Be sure to read before handling. Refer to front matters 42 and 43 for Safety Instructions and pages 3 to 11 for Actuator and Auto Switch Precautions. Recommended Pneumatic Circuit Warning Horizontal Operation 1 11 ∗ ∗ Dual speed controller Meter-in speed controller Speed is controlled by meter-out circuit. Using concurrently the meter-in circuit can alleviate the stick-slip.
PAGE 98
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 595 Fine Lock Cylinders/Lock-up Cylinder Series CL ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100, ø125, ø140, ø160 Locking method Spring locking • Unlocking Discharging the air causes the lock to operate. Features Pneumatic locking Locking in both directions is possible. Spring and pneumatic locking Locking in either side of cylinder stroke is CLM2 possible, too. (The lock-up cylinder can be locked only in one CLG1 direction.
PAGE 99
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 596 Series CL Specific Product Precautions 1 Be sure to read before handling. The precautions on these pages are for the fine lock cylinders and the lock-up cylinders. For general actuator precautions, refer to Actuator Precautions on pages 3 to 7. Design of Equipment and Machinery Warning 1. Construct so that the human body will not come into direct contact with driven objects or the moving parts of locking cylinders.
PAGE 100
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 597 Series CL Specific Product Precautions 2 Be sure to read before handling. The precautions on these pages are for the fine lock cylinders and the lock-up cylinders. For general actuator precautions, refer to Actuator Precautions on pages 3 to 7. Mounting Warning 1. Be certain to connect the rod end to the load with the lock released.
PAGE 101
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 598 Series CL Specific Product Precautions 3 Be sure to read before handling. The precautions on these pages are for the fine lock cylinders and the lock-up cylinders. For general actuator precautions, refer to Actuator Precautions on pages 3 to 7. Pneumatic Circuit Caution Warning 1. Be certain to use an pneumatic circuit which will apply balancing pressure to both sides of the piston when in a locked stop.
PAGE 102
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 599 Series CL Specific Product Precautions 4 Be sure to read before handling. The precautions on these pages are for the fine lock cylinders and the lock-up cylinders. For general actuator precautions, refer to Actuator Precautions on pages 3 to 7. How to Manually Disengage the Lock and Change from the Unlocked to the Locked State The lock is manually disengaged at the time the cylinder is shipped from the factory.
PAGE 103
P0595-P0668-E.qxd 08.11.
PAGE 104
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 601 Fine Lock Cylinder Double Acting, Single Rod Series CLJ2 ø16 How to Order CLJ2 L 16 60 R With auto switch CDLJ2 L 16 60 R CLJ2 CLM2 E CLG1 E M9BW CL1 MLGC With auto switch Made to Order (Built-in magnet) Refer to page 602 for details. Mounting style Basic style B Axial foot style L F Rod side flange style D Double clevis style Number of auto switches Nil 2 pcs. S n 1 pc. “n” pcs.
PAGE 105
P0595-P0668-E.qxd Series 08.11.17 2:57 PM Page 602 CLJ2 Specifications Provided with a compact lock mechanism, it is suitable for intermediate stop, emergency stop, and drop prevention. 16 Bore size (mm) Action Double acting, Single rod Lubricant Not required (Non-lube) Spring locking (Exhaust locking) Pneumatic locking (Pressure locking) Spring and pneumatic locking Lock operation Locking in both directions Fluid The piston rod can be locked in either direction of its cylinder stroke.
PAGE 106
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 603 Fine Lock Cylinder Double Acting, Single Rod Mass 16 Bore size (mm) 320 Allowable kinetic energy (J) Additional mass per each 15 mm of stroke 6.5 Mounting bracket mass 27 Rod side flange style 21 Double clevis style (With pin) ∗∗ 10 ∗ Mounting nut and rod end nut are included in the basic mass. ∗∗ Mounting nut is not included in double clevis style.
PAGE 107
P0595-P0668-E.qxd Series 08.11.17 2:57 PM Page 604 CLJ2 Construction (Not able to disassemble) Spring locking (Exhaust locking) Spring and pneumatic locking Spring lock (E type) Pneumatic locking (Pressure locking) Component Parts No.
PAGE 108
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 605 Fine Lock Cylinder Double Acting, Single Rod Series CLJ2 Basic Style (B) CLJ2B16- E -D P ø Silencer CLJ2 Spring lock CLM2 M5 x 0.8 pressurized locking port Pneumatic locking and spring and pneumatic locking Piping port M5 x 0.8 Manual unlocking cam M5 x 0.8 unlocking port Unlocked when pressurized Lock nut CL1 Head cover port in axial direction (R) M5 x 0.8 Rod side cylinder port M5 x 0.8 Head side cylinder port M14 x 1.0 MLGC CNG MNB ø 18.3 –0.
PAGE 109
P0595-P0668-E.qxd Series 08.11.17 2:57 PM Page 606 CLJ2 Rod Side Flange Style (F) CLJ2F16- E -D P ø8 Silencer Spring lock Piping port M5 x 0.8 Head cover port in axial direction (R) Manual unlocking cam M5 x 0.8 pressurized locking port Pneumatic locking and spring and pneumatic locking M5 x 0.8 unlocking port Unlocked when pressurized M5 x 0.8 Lock nut Rod side cylinder port M14 x 1.0 M6 x 1.0 M5 x 0.8 ø Width across flats 10 18.3–0.30 ø Head side cylinder port 18.3–0.30 2 x ø5.
PAGE 110
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 607 Fine Lock Cylinder Double Acting, Single Rod Series CLJ2 Accessory Bracket Dimensions Single Knuckle Joint: I-LJ016B Double Knuckle Joint: Y-LJ016B Rod End Nut: NT-015A ∗ Knuckle pin and retaining ring are shipped together. M6 x 1.0 ø ø M6 x 1.0 M6 x 1.0 CLJ2 CLM2 Material: Rolled steel Material: Rolled steel Material: Rolled steel CL1 Mounting Nut: SNLJ-016B Clevis Pin: CD-Z015 Knuckle Pin: IY-J015A ∗ Retaining rings are shipped together.
PAGE 111
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 608 CLJ2 Series Auto Switch Proper Mounting Position (Detection at Stroke End) and Its Mounting Height Reed auto switch Solid state auto switch D-A9 D-M9 D-M9 W ~ = Hs ~ = Hs Auto Switch 17 17 Auto Switch A A B 22 (24.
PAGE 112
P0595-P0668-E.qxd 08.11.17 2:57 PM Page 609 Fine Lock Cylinder Double Acting, Single Rod Series CLJ2 Operating Range Minimum Auto Switch Mounting Stroke (mm) (mm) No. of auto switches mounted Auto switch mounting Auto switch model 1 Different surfaces Same surface Different surfaces D-A9 D-M9 D-M9 W 10 D-C7 D-C80 10 Auto switch model n (n: No.
PAGE 113
P0595-P0668-E.qxd Series 08.11.17 2:57 PM Page 610 CLJ2 Besides the models listed in How to Order, the following auto switches are applicable. Refer to pages 1719 to 1827 for the detailed specifications. Auto switch type Reed Solid state Part no.