Datasheet

Compared with the standard type, a cylinder which changes the connection port location of rod/head cover.
4
Special Port Location
-XC3
Symbol
Applicable Series
Series Description Model Action Note
CJ2-Z
Standard type CJ2
Double acting,
Single rod
Except with rail mounting type
auto switches, with air cushion
Non-rotating
rod type
CJ2K
Double acting,
Single rod
Except with rail mounting type
auto switches
Specifi cations: Same as standard type
Corresponding symbol of mounting bracket (Positional relationships)
It adjusts the extending stroke by the stroke adjustable mechanism equipped in the head side. (After the stroke is adjusted, with cushion on both sides is altered to single-sided, with cushion.)
5
Adjustable Stroke Cylinder/Adjustable Extension Type
-XC8
Symbol
Applicable Series
Series Description Model Action Note
CJ2-Z
Standard type CJ2
Double acting,
Single rod
Except with air cushion, double-
side bossed, double clevis,
double foot, head fl ange.
Specifi cations
Stroke adjustment symbol —
Stroke adjustment range [mm] 0 to 15
Additional specifi cations Same as standard type
Port
B
C
D
A
∗ Viewed from the rod side, the ports are
rendered A, B, C, and D, in the clockwise
direction.
<Position relation between clevis and port>
∗ Viewed from the rod side, with the clevis
positioned as shown in the diagram, the
ports are rendered A, B, C, and D, in the
clockwise direction.
Port
D
C
B
A
ZZ + 2 x Stroke
S + Stroke HA + Stroke
20
Dimensions (Dimensions other than below are the same as standard type.)
Port Location
Special port location
Rod port location viewed from the rod side
Head port location viewed from the rod side
∗ For port location, refer to the diagrams on the
right and show the symbols of A, B, C and D.
How to Order
Standard model no.
XC3
AB
Adjustable stroke cylinder/Adjustable extension type
How to Order
Mounting style Bore size Stroke
XC8CJ2 Z
∗ Dimensions except mentioned above are the same as
standard type.
[mm]
Bore size Applicable stroke
HA S ZZ
10
15 to 150 37 49 114
16
15 to 200 37 50 115
Adjustable range
Symbol
1. When the cylinder is operating, if something gets caught between the
stopper bracket for adjusting the stroke and the cylinder body, it could
cause bodily injury or damage the peripheral equipment. Therefore, take
preventive measures as necessary, such as installing a protective cover.
2. To adjust the stroke, make sure to secure the wrench fl ats of the stopper
bracket by a wrench etc. before loosening the lock nut. If the lock nut is
loosened without securing the stopper bracket, be aware that the area
that joins the load to the piston rod or the area in which the piston rod is
joined with the load side and the stopper bracket side could loosen fi rst. It
may cause an accident or malfunction.
Precautions
Warning
91
Series CJ2