Datasheet

Low-speed Cylinder
Smooth operation with a little sticking and slipping at low
speed.
Can start smoothly with a little ejection even after being
rendered for hours.
CJ2 X
Low-speed Cylinder
Copper and Fluorine-free Cylinder
(For CRT manufacturing process)
Double acting, Single rod
6, 10, 16
0.7 MPa
0.14 MPa
0.08 MPa
Rubber bumper/Air cusion
Same as standard type. (Refer to page 43.)
Mountable (Band mounting style)
Specifications
ø6
ø10, ø16
ø6
ø10, ø16
Basic style, Axial foot style,
Rod side flange style
Double acting, Single rod
6, 10, 16
0.7 MPa
0.12 MPa
0.06 MPa
Rubber bumper (Standard equipment)
Same as standard type. (Refer to page 43.)
Mountable (Band mounting style)
Specifications
Basic style, Axial foot style, Rod side flange style,
Double clevis style (Except ø6)
ø10
ø16
Double acting, Single rod
10, 16
Air
1.05 MPa
0.7 MPa
0.06 MPa
Rubber bumper (Standard equipment)
Not required (Non-lube)
1 to 300 mm/s
0.035 J
0.090 J
Specifications
For details, refer to the separate catalog “Pneumatic Clean Series”.
Refer to Best Pneumatics No. 3.
Construction Construction
+1.0
0
Without auto switch: –10 to 70°C
With auto switch: –10 to 60°C
(No freezing)
Action
Bore size (mm)
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Piston speed
Allowable kinetic energy
45
Series CJ2
Air Cylinder: Standard Type
Double Acting, Single Rod
Clean Series
Mounting style
Bore size Stroke
Head cover
port location
10-CJ2
Clean Series
Air cylinder which is applicable for the system which
discharges leakage from the rod section directly into the
outside of clean room by relief port and making an actuator’s
rod section having a double seal construction.
Action
Bore size (mm)
Maximum operating pressure
Cushion
Standard stroke (mm)
Auto switch
Minimum operating
pressure
Mounting
Action
Bore size (mm)
Maximum operating pressure
Cushion
Standard stroke (mm)
Auto switch
Minimum operating
pressure
Mounting
Mounting style
Bore size Stroke
Head cover
port location
20-CJ2
Copper and fluorine-free
Eliminates the effects by copper based ions and fluorine
based resins, etc. over the color cathode ray tube.
Making copper based materials into electroless nickel plated
treatment or changing them to the non-copper materials in
order to prevent copper ions from generating.
Mounting style
Bore size Stroke
CJ1
CJP
CJ2
CM2
CG1
MB
MB1
CA2
CS1
CS2
Individual
-X쏔
D-쏔
-X쏔
Technical
data
P0015-P0124-E.qxd 08.10.2 4:00 PM Page 45