Datasheet

Specifications
Action
Bore size (mm)
Maximum operating pressure
Minimum operating pressure
Cushion
Standard stroke (mm)
Auto switch
Mounting
Double acting, Single rod
10, 16
0.7 MPa
0.08 MPa
Rubber bumper
Same as the standard. (Refer to page 95.)
Mountable (Band mounting style)
Bottom mounting style
For details, specifications about the Clean Series, refer to the
separate catalog “Pneumatic Clean Series”.
Specifications
Action
Maximum operating pressure
Minimum operating pressure
Cushion
Standard stroke (mm)
Auto switch
Mounting
Double acting, Single rod
0.7 MPa
0.06 MPa
Rubber bumper (Standard equipment)
Same as standard type. (Refer to page 95.)
Mountable (Band mounting style)
Bottom mounting style
10, 16
Bore size (mm)
10-CJ2RA (Clean series) Construction (Not able to disassemble)
96
Series CJ2R
Air cylinder which is applicable for the system which
discharges leakage from the rod section directly into the
outside of clean room by relief port and making an
actuator’s rod section having a double seal construction.
Eliminates the effects by copper based ions and fluorine
based resins, etc. over the color cathode ray tube.
Making copper based materials into electroless nickel
plated treatment or changing them to the non-copper
materials in order to prevent copper ions from generating.
Clean Series
10-CJ2RA
20-CJ2RA
Clean Series
Copper and fluorine-free
Copper and Fluorine-free Air Cylinder
(For CRT manufacturing process)
Bore size
Stroke
Head cover port location
Bore size
Stroke
Head cover port location
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 96