Datasheet

Air cylinder which changed the seal material and grease, so that it could be used even at higher temperature up to 150 from –10°C.
Air cylinder which changed the seal material and grease, so that it could be used even at lower temperature down to – 40°C.
Even if driving at lower speeds 10 to 50 mm/s, there would be no stick-slip phenomenon and it can run smoothly.
Low speed cylinder
How to Order
Standard model no.
XB9
1
Heat Resistant Cylinder (−10 to 150°C)
-XB6
Symbol
2
Cold Resistant Cylinder (−40 to 70°C)
-XB7
Symbol
3
Low Speed Cylinder (10 to 50 mm/s)
-XB9
Symbol
Heat resistant cylinder
How to Order
Standard model no.
XB6
Note 1) Operate without lubrication from a pneumatic system lubricator.
Note 2) Please contact SMC for details on the maintenance intervals for this
cylinder, which differ from those of the standard cylinder.
Note 3)
In principle, it is impossible to make built-in magnet type and the one
with auto switch. But, as for the one with auto switch, and the heat
resistant cylinder with heat resistant auto switch, please contact SMC.
Note 4) Piston speed is ranged from 50 to 500 mm/s.
Applicable Series
Series Description Model Action Note
CJ2-Z
Standard type
CJ2
Double acting,
Single rod
Except with air cushion
and auto switch
CJ2W
Double acting,
Double rod
Except with air cushion
and auto switch
Cold resistant cylinder
How to Order
Standard model no.
XB7
Note 1) Operate without lubrication from a pneumatic system lubricator.
Note 2) Use dry air which is suitable for heatless air dryer, etc. not to cause
the moisture to be frozen.
Note 3) Please contact SMC for details on the maintenance intervals for this
cylinder, which differ from those of the standard cylinder.
Note 4) Mounting auto switch is impossible.
Note 5) Piston speed is ranged from 50 to 500 mm/s.
Applicable Series
Series Description Model Action Note
CJ2-Z
Standard type
CJ2
Double acting,
Single rod
Except with air cushion
and auto switch
CJ2W
Double acting,
Double rod
Except with air cushion
and auto switch
Applicable Series
Series Description Model Action Note
CJ2-Z
Standard type CJ2
Double acting,
Single rod
Except with air cushion
Specifi cations
Ambient temperature range −10°C to 150°C
Seals materials Fluororubber
Grease Heat resistant grease
Specifi cations other than above and external dimensions Same as standard type
Specifi cations
Ambient temperature range −40°C to 70°C
Seals material Low nitrile rubber
Grease Cold resistant grease
Auto switch Not mountable
Dimensions Same as standard type
Additional specifi cations Same as standard type
Note) Operate without lubrication from a pneumatic system lubricator.
Specifi cations
Piston speed 10 to 50 mm/s
Dimensions Same as standard type
Additional specifi cations Same as standard type
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Precautions
Warning
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Precautions
Warning
Be aware that smoking cigarettes etc. after your hands have come into
contact with the grease used in this cylinder can create a gas that is
hazardous to humans.
Precautions
Warning
90
CJ2CJ2WCJ2CJ2KCJ2KCJ2ZCJ2ZWCJ2RCJ2RCJ2RKCJ2RK
StandardBuilt-in Speed ControllerDirect Mount
Double Acting, Single Rod
Double Acting, Double Rod
Single Acting, Spring Return/Extend
Double Acting, Single Rod
Single Acting, Spring Return/Extend
Double Acting, Single Rod
Double Acting, Double Rod
Double Acting, Single Rod
Single Acting, Spring Return/Extend
Double Acting, Single Rod
Auto Switch
Made to Order
Single Acting, Spring Return/Extend
Non-rotating RodDirect Mount, Non-rotating Rod
Series CJ2
Made to Order
Please contact SMC for detailed dimensions, specifi cations and lead times.