Datasheet

ManualsBrandsSMC ManualsActuatorsAir Cylinder, Double Acting, Single Rod, 45mm, Bore Size 10mm M5

Series/Made to Order set additionallySeries/Made to Order set additionally

Standard type: Double rod, Single acting

Non-rotating rod type

Direct mount type

Direct mount, Non-rotating rod type

Made to Order: Heat resistant cylinder (-XB6),

Dual stroke cylinder (-XC10, 11) etc. are added.

are

added to the

mounting types.

7 types4 types

Head cover with

boss is added.

Improved amount of

mounting freedom

Double foot Head flange

Double-side bossed

Head cover

with boss

Fine adjustment of the auto switch position is possible by

simply loosening the screw attached to the auto switch.

Easy fine adjustment

of auto switch position

Easy fine adjustment

of auto switch position

Transparent switch bracket improves

visibility of indicator LED.

Screw attached to auto switch

LED colour indicator

Switch bracket

Fine adjustment of auto switch

Rod end deflection is reduced by mounting a

wear ring to the piston as standard.

Rod end deflection accuracy

improved

Wear ring

Deflection

Air Cylinder

ø10, ø16

CAT.EUS20-226B-UK

New

RoHS

Double foot

Double-side bossed

Head flange

Series CJ2

Summary of content (104 pages)

PAGE 1
Air Cylinder New ø10, ø16 RoHS Double foot Head flange Double-side bossed are added to the mounting types. 4 types Double-side bossed 7 types Head cover with boss Double foot Head flange Improved amount of mounting freedom Head cover with boss is added. Easy fine adjustment of auto switch position Rod end deflection accuracy improved Fine adjustment of the auto switch position is possible by simply loosening the screw attached to the auto switch.
PAGE 2
Air Cylinder Part numbers with rod end bracket and/or pivot bracket available Not necessary to order a bracket for the applicable cylinder separately Note) Mounting bracket is shipped together with the product, but not assembled. Example) Pivot bracket — None N Pivot bracket is shipped together with the product, but not assembled.
PAGE 3
Series CJ2 Easy fine adjustment of auto switch position Screw attached to auto switch Fine adjustment of the auto switch set position can be performed by loosening the auto switch attached screw without loosening the auto switch mounting band. Operability improved compared with the conventional auto switch set position adjustment, where the complete switch mounting band requires loosening.
PAGE 4
Combinations of Standard Products and Made to Order Specifications Series CJ2 Series : Standard : Made to Order : Special product (Please contact SMC for details.
PAGE 5
Standard D — — — — — — — CJ2쏔-쏔A — — — — — 10- 25A XB6 XB7 — — — — — — — — XB9 — — — — — — XC3 — XC8 — — — — XC9 — XC10 — — — — — — XC11 XC22 XC51 XC85 CJ2 CJ2W Made to Order Auto Switch X446 CJ2 CJ2K CJ2K CJ2Z CJ2ZW CJ2RK CJ2RK Non-rotat
PAGE 6
Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 RoHS ø10, ø16 How to Order CJ2 B 16 60 A With auto switch CDJ2 D 16 60 A 10 16 Mounting ∗ Mounting bracket is shipped together with the product, but not assembled.
PAGE 7
Air Cylinder: Standard Type Double Acting, Single Rod Series CJ2 Dual stroke cylinder/Single rod type Fluororubber seal ∗ Not available with air cushion With hose nipple Grease for food processing equipment PTFE grease Mounting bracket 16 CJ-L010C CJ-F010C CJ-T010C CJ-L016C CJ-F016C CJ-T016C ∗ T-bracket is used with double clevis (D).
PAGE 8
Series CJ2 Precautions Refer to page 96 before handling. Clean Series 10-CJ2 Mounting style Bore size Stroke Head cover port location Z Clean Series Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator’s rod section having a double seal construction.
PAGE 9
r u y !0 t !2 w Single Acting, Spring Return/Extend !0 !3 !2 t !6 !5 w @0 Direct Mount With auto switch Component Parts Description Rod cover Material Aluminium alloy Note Anodised No.
PAGE 10
CJ2 Series Dimensions Basic (B) CJ2B Bore size – Stroke Head cover port location Z Rod end nut Mounting nut Y GA GB Piping port 2 x M5 x 0.8 NN øC 0 B –0.3 øD MM A F NA 0 NB H B –0.3 øNDh8 S + Stroke Z + Stroke Piping port M5 x 0.8 Axial location (R) Section Y detail ∗ The overall cylinder length does not change. With air cushion: CJ2B Bore size – Stroke A Head cover port location Z Piping port M5 x 0.
PAGE 11
Built-in Speed Controller Z + Hub With air cushion: CJ2L Bore size – Stroke A Head cover port location Z Leitungsanschluss M5 x 0.8 Head cover port location Axial location (R) Befestigungsmutter ∗ The overall cylinder length does not change. GA Leitungsanschluss 2 x M5 x 0.8 GB Abdeckungsfläche LB 0 B–0.3 øC 45° Direct Mount Kolbenstangenmutter 0 NA B–0.3 NB S + Hub Direct Mount, Non-rotating Rod Z + Hub WB WA For details of the mounting nut, refer to page 12.
PAGE 12
CJ2 Series Dimensions Double foot (M) CJ2M Bore size – Stroke Z 4 x øLC Mounting hole Mounting nut H Mounting nut F GA GB Piping port 2 x M5 x 0.8 NN F Cover surface NN Rod end nut LT LX A LZ X Y LY LB LH LT øD MM NB Y X NA S + Stroke LS + Stroke Z + Stroke With air cushion: CJ2M Bore size – Stroke A Z Mounting nut Mounting nut Rod end nut GA GB Piping port 2 x M5 x 0.8 Cover surface LB 0 B–0.3 øC 45° 0 B–0.
PAGE 13
Built-in Speed Controller Z + Hub With air cushion: CJ2F Bore size – Stroke A Head cover port location Z Leitungsanschluss M5 x 0.8 Head cover port location Axial location (R) Befestigungsmutter Kolbenstangenmutter ∗ The overall cylinder length does not change. GB Leitungsanschluss 2 x M5 x 0.8 Abdeckungsfläche FB 0 B–0.3 øC 45° Direct Mount GA NB NA 0 B–0.3 S + Hub Direct Mount, Non-rotating Rod Z + Hub WB WA For details of the mounting nut, refer to page 12.
PAGE 14
Series CJ2 Dimensions Head flange (G) CJ2G Bore size – Stroke Z GA Rod end nut Mounting nut GB Piping port 2 x M5 x 0.8 NN B–0.3 øD 0 2 x øFC Mounting hole FX FZ NN FY FB MM øC Cover surface A F NA NB H S + Stroke 0 FT B–0.3 F Z + Stroke With air cushion: CJ2G Bore size – Stroke A Z Rod end nut GA Cover surface Mounting nut GB Piping port 2 x M5 x 0.8 45° 0 FB B–0.3 øC NA NB 0 B–0.
PAGE 15
With air cushion: CJ2D Bore size – Stroke A Z NB GB Kolbenstangenmutter GA Leitungsanschluss 2 x M5 x 0.8 45° 0 0 B–0.3 CZ –0.3 øC øC NA 0 S + Hub Direct Mount B–0.3 Z + Hub ZZ + Hub WA WB ∗ A clevis pin and retaining rings are included. A 10 16 [mm] B C CD (cd) CX CZ D GA GB H MM NA NB R S 15 12 14 3.3 15 18.3 20 5 3.2 12 4 8 18 28 M4 x 0.7 12.5 22.5 5 6.5 18.3 5 8 23 28 M5 x 0.8 12.5 27.
PAGE 16
Series CJ2 Dimensions Double-side bossed (E) øNDh8 øNDh8 CJ2E Bore size – Stroke Z Section Y detail Section YY detail Befestigungsmutter NN GA Y GB Leitungsanschluss 2 x M5 x 0.8 YY NN 0 B–0.3 MM øC Kolbenstangenmutter F NB NA 0 B–0.3 øD A H F S + Hub Z + Hub With air cushion: CJ2E Bore size – Stroke A Z Befestigungsmutter Kolbenstangenmutter GA GB Leitungsanschluss 2 x M5 x 0.8 45° 0 B–0.3 øC NA NB 0 B–0.
PAGE 17
Material: Carbon steel Material: Rolled steel Applicable bore size A1 L L1 MM 10 8 15.2 21 M4 x 0.7 Y-J016C 16 11 16.6 21 M5 x 0.8 Part no. NDd9 NDH10 NX +0.048 Y-J010C 3.3–0.030 3.2 –0.060 3.3 0 Y-J016C 5–0.030 –0.060 5+0.048 0 R1 6.5 Part no. Applicable bore size B1 U1 8 10 12 10 d H1 C2 d H2 SNJ-010C 10 11 12.7 M8 x 1.0 4 NTJ-010C 10 7 8.1 M4 x 0.7 3.2 SNJ-016C SNKJ-016C∗ 16 14 16.2 M10 x 1.0 4 NTJ-015C 16 8 9.2 M5 x 0.8 4 16 17 19.6 M12 x 1.
PAGE 18
Air Cylinder: Standard Type Double Acting, Double Rod Series CJ2W RoHS ø10, ø16 How to Order CJ2W B 16 With auto switch 60 A Z CDJ2W L 16 60 A Z M9BW B Built-in magnet Mounting B L F Basic Foot Flange Auto switch mounting type Bore size 10 16 ∗ Mounting bracket is shipped together with the product, but not assembled.
PAGE 19
-XC22 -XC51 -XC85 -X446 ∗ A pin and retaining rings are shipped together with double knuckle joint. ∗ Not available with switch & with air cushion Cold resistant cylinder (−40 to 70°C) ∗ Not available with switch & with air cushion Fluororubber seal ∗ Not available with air cushion Mounting Brackets/Part No.
PAGE 20
Series CJ2W Clean Series 10-CJ2W Mounting style Bore size Stroke Z Clean Series Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator’s rod section having a double seal construction. Specifications Action Bore size [mm] 0.7 MPa Minimum operating pressure 0.
PAGE 21
2 Cylinder tube 3 Piston rod 4 Note Anodised No.
PAGE 22
CJ2W Series Basic (B) Befestigungsmutter NN GA NN MM øC 0 B -0.3 MM GA Leitungsanschluss 2 x M5 x 0.8 øD øD øNDh8 Kolbenstangenmutter øNDh8 CJ2WB Bore size – Stroke Z A F NA A NA F H S + Hub 0 B -0.3 H + Hub Z + 2 x Hub With air cushion: CJ2WB Bore size – Stroke A Z Befestigungsmutter 45° GA Leitungsanschluss 2 x M5 x 0.8 0 B -0.3 øC Kolbenstangenmutter NA NA 0 B -0.3 S + Hub Z + 2 x Hub WA WA For details of the mounting nut, refer to page 12.
PAGE 23
Rod end nut 45° Cover surface GA LB 0 B−0.3 øC GA Piping port 2 x M5 x 0.8 Built-in Speed Controller Mounting nut 0 B−0.3 NA View E View E NA WA For details of the mounting nut, refer to page 12. [mm] Bore size A B C D F GA H LB LC LH LT LX LY LZ MM NA NN S X Y Z 10 16 15 12 14 4 8 8 28 15 4.5 9 1.6 24 16.5 32 M4 x 0.7 12.5 M8 x 1.0 49 5 7 105 15 18.3 20 5 8 8 28 23 5.5 14 2.3 33 25 42 M5 x 0.8 12.5 M10 x 1.
PAGE 24
Series CJ2W Flange (F) CJ2WF Bore size – Stroke Z Befestigungsmutter Kolbenstangenmutter NN Abdeckungsfläche MM øD GA B FB FY 0 -0.3 øD øC GA Leitungsanschluss 2 x M5 x 0.8 NN MM 0 B -0.3 FT F NA A NA F H A S + Hub FX FZ H + Hub Z + 2 x Hub 2 x øFC Montagebohrung With air cushion: CJ2WF Bore size – Stroke A Z Befestigungsmutter Kolbenstangenmutter GA Abdeckungsfläche Leitungsanschluss 2 x M5 x 0.8 FB 0 B -0.3 øC 45° NA 0 B -0.
PAGE 25
10 10 mm 16 16 mm ∗ Mounting bracket is shipped together with the product, but not assembled. — Perpendicular to axis R Axial ∗ For rail mounting, screws and nuts for 2 auto switches come with the rail. ∗ Refer to page 84 for auto switch mounting brackets. ∗ For double clevis, the product is perpendicular to the cylinder axis. ∗ For double-side bossed, the product is perpendicular to the cylinder axis. ∗ Not applicable to single acting, spring extend (T). Number of auto switches — S n 2 pcs. 1 pc.
PAGE 26
Series CJ2 Specifications 10 Bore size [mm] Action 16 Single acting, Spring return/Single acting, Spring extend Fluid Spring extend Air Proof pressure Spring return 1 MPa Maximum operating pressure 0.7 MPa Minimum operating Spring return pressure Spring extend 0.15 MPa 0.15 MPa Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C∗ Ambient and fluid temperature Cushion Rubber bumper Lubrication Not required (Non-lube) +1.
PAGE 27
28 28 30 29 63 63 71 67 30 stroke 34 34 36 35 77 77 85 80 45 stroke 44 44 45 45 95 95 102 97 45 stroke 42 42 44 43 93 93 100 96 60 stroke 54 54 55 54 113 113 119 115 60 stroke 51 51 52 51 109 109 116 112 204 204 212 150 stroke 227 227 234 8 25 Double foot 16 50 Rod flange 5 13 Head flange 5 13 Single knuckle joint 17 Double knuckle joint (including knuckle pin) 129 129 137 133 159 159 166 162 206 125 stroke 193 193 201 196 229
PAGE 28
Series CJ2 Construction (Not able to disassemble) Single acting, Spring return ; : . 2 B 8 = > @ CDJ2B10/16-첸SZ-B Single acting, Spring extend ; : 2 B 8 = > . @ CDJ2B10/16-첸TZ-B Component Parts No.
PAGE 29
C D F GB H 15 12 14 15 18.3 20 4 5 8 8 5 5 MM NA NB ND h8 28 M4 x 0.7 4.8 9.5 28 M5 x 0.8 4.8 9.5 0 8−0.022 0 10−0.022 NN 5 to 15 st M8 x 1.0 45.5 M10 x 1.0 45.5 16 to 30 st 53 54 31 to 45 st 65 66 46 to 60 st 77 78 61 to 76 to 101 to 126 to 5 to 75 st 100 st 125 st 150 st 15 st — — — — 73.5 84 108 126 138 73.
PAGE 30
CJ2 Series Single Acting, Spring Return: Double Clevis (D) CJ2D Bore size – Stroke SZ MM −0.030 Clevis pin (øcdd9−0.060) 0 B−0.3 0 CZ−0.3 øD øC Rod end nut øC +0.030 0 øCDH9 NB GB Piping port M5 x 0.8 NA A H CX+0.2 +0.1 0 −0.3 CZ 0 B−0.3 S + Stroke U Z + Stroke ZZ + Stroke R [mm] S Bore size A B C CD CX CZ (cd) D GB H MM 10 16 15 15 12 18.3 14 20 3.3 5 4 5 18 23 20 20 M4 x 0.7 M5 x 0.8 3.2 6.5 12 18.3 NA NB R U 4.8 4.8 5 8 8 10 22.5 27.
PAGE 31
15 15 4 5 8 8 5 to 15 st 45.5 45.5 16 to 30 st 53 54 31 to 45 st 65 66 10 16 F GB H 5 5 28 28 LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to LT LX LY LZ 15 23 15 st 30 st 45 st 60 st 75 st 100 st 125 st 150 st 9 59.5 67 79 91 — — — — 1.6 14 63.5 72 84 96 102 126 144 156 2.3 4.5 5.5 S MM 24 16.5 32 33 25 42 NA NB M4 x 0.7 M5 x 0.8 4.8 4.8 9.5 9.5 NN M8 x 1.0 M10 x 1.
PAGE 32
Series CJ2 Single Acting, Spring Return: Head Flange (G) CJ2G Bore size – Stroke SZ GB Cover surface Piping port M5 x 0.8 Mounting nut FB FY 0 B−0.3 øD øC NN MM FX FZ 2 x øFC Mounting hole A F NA H Rod end nut FT NB S + Stroke 0 B−0.3 F Z + Stroke For details of the mounting nut, refer to page 12.
PAGE 33
10 16 A B C D F GA H 15 12 14 15 18.3 20 4 5 8 8 MM NA NB ND h8 0 28 M4 x 0.7 12.5 4.8 8−0.022 0 28 M5 x 0.8 12.5 4.8 10−0.022 8 8 NN 5 to 15 st M8 x 1.0 48.5 M10 x 1.0 48.5 16 to 31 to 30 st 45 st 56 68 57 69 46 to 61 to 76 to 60 st 75 st 100 st 80 — — 81 87 111 101 to 125 st — 129 126 to 5 to 150 st 15 st — 76.5 141 76.
PAGE 34
CJ2 Series Single Acting, Spring Extend: Double Clevis (D) CJ2D Bore size – Stroke TZ +0.030 0 øCDH9 −0.030 GA Rod end nut MM øD øC NN 0 B−0.3 0 CZ−0.3 øC Clevis pin (øcdd9−0.060) NB Piping port M5 x 0.8 A CX+0.2 +0.1 F NA H + Stroke 0 −0.3 CZ 0 B−0.3 U S + Stroke R Z + 2 x Stroke ZZ + 2 x Stroke ∗ A clevis pin and retaining rings are included. [mm] S Bore size A B C CD CX CZ (cd) D GA H MM NA NB R U 10 16 15 15 12 18.3 14 20 3.3 5 4 5 8 8 28 28 M4 x 0.
PAGE 35
Z + 2 x Stroke For details of the mounting nut, refer to page 12. A 10 16 15 15 4 5 8 8 5 to 15 st 48.5 48.5 16 to 30 st 56 57 31 to 45 st 68 69 10 16 D F GA H 8 8 28 28 LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to LT LX LY LZ 15 23 4.5 5.5 15 st 30 st 45 st 60 st 75 st 100 st 125 st 150 st 9 62.5 70 82 94 — — — — 1.6 14 66.5 75 87 99 105 129 147 159 2.3 S 24 16.5 32 33 25 42 MM NA NB NN M4 x 0.7 12.5 4.8 M8 x 1.0 M5 x 0.8 12.5 4.8 M10 x 1.
PAGE 36
Series CJ2 Single Acting, Spring Extend: Head Flange (G) CJ2G Bore size – Stroke TZ Cover surface GA NN Rod end nut Piping port M5 x 0.8 Mounting nut FB FY 0 B−0.3 øD øC MM FX FZ 2 x øFC Mounting hole FT A F NA F NB H + Stroke 0 B−0.3 S + Stroke Z + 2 x Stroke For details of the mounting nut, refer to page 12. Bore size 10 16 31 [mm] S A B C D F FB FC FT FX FY FZ GA H MM NA NB NN 5 to 15 st 15 12 14 4 8 13 4.5 1.6 24 14 32 8 28 M4 x 0.7 12.5 4.8 M8 x 1.0 48.5 15 18.
PAGE 37
Auto switch If a built-in magnet cylinder without an auto switch is required, refer to the model of built-in magnet cylinder. — S n 2 pcs. 1 pc. “n” pcs.
PAGE 38
Series CJ2K Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. 10 Bore size [mm] Action 16 Double acting, Single rod Fluid Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Can operate without lubrication. Air Proof pressure 1 MPa Maximum operating pressure 0.7 MPa Minimum operating pressure Ambient and fluid temperature 0.06 MPa Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C∗ Cushion Rubber bumper Lubrication Not required (Non-lube) +1.
PAGE 39
!3 i q !0 e r y t !2 u w Material Aluminium alloy Aluminium alloy Stainless steel Stainless steel Aluminium alloy Aluminium alloy Urethane NBR Note Clear hard Anodised Clear hard Anodised No.
PAGE 40
CJ2K Series Basic (B) CJ2KB Bore size – Stroke Head cover port location Z øNDh8 Piping port M5 x 0.8 Head cover port location Axial location (R) ∗ The overall cylinder length does not change. Mounting nut Section Y detail Y GA GB Piping port 2 x M5 x 0.8 A B NN øC 0 BA−0.3 KA 0 BB−0.3 øC Rod end nut MM 0 BB−0.3 A NB F NA H 0 BA−0.3 Rod section S + Stroke Z + Stroke Refer to page 12 for details of the mounting nut.
PAGE 41
15 CB CD(cd) CX GA GB H KA MM NA NB R S 15 12 17 14 3.3 18.3 18.3 20 20 5 Z ZZ 3.2 8 18 28 4.2 M4 x 0.7 12.5 22.5 5 6.5 8 23 28 5.2 M5 x 0.8 12.5 27.5 8 46 8 82 87 47 10 85 93 CJ2KL Bore size – Stroke Head cover port location Z Piping port M5 x 0.8 2 x øLC Mounting hole Head cover port location Axial location (R) A øC Rod section Y LX LZ View E NB NA H 0 BA−0.3 S + Stroke Z + Stroke Refer to page 12 for details of the mounting nut.
PAGE 42
Series CJ2K Double Foot [m] CJ2KM Bore size – Stroke Z 2 x øLC Mounting hole H Rod end nut Mounting nut F GA NN GB Piping port 2 x M5 x 0.8 MM F Mounting nut Cover surface LT LT KA LH LB LY NN A X Y NA LX LZ Rod section X NB Y S + Stroke LS + Stroke Z + Stroke Refer to page 12 for details of the mounting nut. (SNJ-016B for ø10, SNKJ-016B for ø16) Bore size A F GA GB 10 16 15 8 8 15 8 8 [mm] H KA LB LC LH LS LT LX LY LZ 5 28 4.2 21.5 5.5 14 64 2.
PAGE 43
F FB FC FT FX FY FZ GA GB 10 16 15 15 17 8 17.5 5.5 2.3 33 20 42 8 15 18.3 20 8 19 5.5 2.3 33 20 42 8 [mm] H KA MM NA NB NN S Z 5 28 4.2 M4 x 0.7 12.5 9.5 M10 x 1.0 46 82 5 28 5.2 M5 x 0.8 12.5 9.5 M12 x 1.0 47 83 CJ2 CJ2W CJ2 Made to Order Auto Switch C Built-in Speed Controller B Direct Mount A Direct Mount, Non-rotating Rod Bore size CJ2K Refer to page 12 for details of the mounting nut.
PAGE 44
Air Cylinder: Non-rotating Rod Type Single Acting, Spring Return/Extend Series CJ2K ø10, ø16 How to Order Action S T Cylinder standard stroke [mm] Refer to “Standard Strokes” on page 40. Single acting, Spring return Single acting, Spring extend Made to Order Refer to page 40 for details. CJ2K L 16 45 S With auto switch Z CDJ2K L 16 45 S Z M9BW B Auto switch With auto switch ∗ For applicable auto switches, refer to the table below.
PAGE 45
Standard Strokes Spring Reaction Force [mm] Bore size 10 Single acting, Spring extend, Rubber bumper 16 Standard stroke Bore size [mm] 15, 30, 45, 60 10 16 15, 30, 45, 60, 75, 100, 125, 150 ∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) (For details, refer to pages 87 to 95.) Grease for food processing equipment Precautions Refer to page 96 before handling.
PAGE 46
Series CJ2K Weights Spring Return [g] 10 Bore size [mm] Basic [g] 10 Bore size [mm] Double Double HeadHeadAxial clevis Axial clevis side Basic side piping (including piping (including bossed bossed clevis pin) clevis pin) Mounting Basic 16 Double Double HeadHeadAxial clevis Axial clevis side Basic side piping (including piping (including bossed bossed clevis pin) clevis pin) 30 30 30 31 64 64 70 66 15 stroke 29 29 31 31 64 64 72 69 30 stroke 38 38 38 39 79 79 86 81 3
PAGE 47
w !6 Rod section !3 CDJ2BK10/ 16-첸TZ-B Component Parts Note Clear hard Anodised Clear hard Anodised No.
PAGE 48
Series CJ2K Single Acting, Spring Return: Basic (B) øNDh8 CJ2KB Bore size – Stroke S Head cover port location Z Piping port M5 x 0.8 Head cover port location Axial location (R) ∗ The overall cylinder length does not change. GB Section Y detail Rod end nut Piping port M5 x 0.8 A NN øC B øC Mounting nut Y 0 BA−0.3 KA 0 BB−0.3 MM 0 BB−0.3 A F 0 BA−0.3 NB NA H S + Stroke Z + Stroke For details of the mounting nut, refer to page 12.
PAGE 49
Series CJ2K Double Acting, Single Rod Single Acting, Spring Return: Double Clevis (D) CJ2KD Bore size – Stroke SZ 4.8 22.5 4.8 27.5 5 8 8 10 Z Bore size 10 16 5 to 16 to 15 st 30 st 73.5 81 75.5 84 31 to 45 st 93 96 46 to 60 st 105 108 ZZ 61 to 76 to 101 to 126 to 75 st 100 st 125 st 150 st − − − − 114 138 156 168 5 to 16 to 15 st 30 st 78.5 86 83.
PAGE 50
Series CJ2K Single Acting, Spring Return: Double Foot (M) 4 x øLC Mounting hole CJ2KM Bore size – Stroke SZ H NN Mounting nut Piping port M5 x 0.8 Cover surface LT LT KA MM F GB Mounting nut F LH LB LY Rod end nut NB A X NA Y LX LZ X Y S + Stroke LS + Stroke Z + Stroke For details of the mounting nut, refer to page 12. Bore size A 10 16 15 15 Bore size 10 16 [mm] LS F 8 8 GB 5 5 H LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to LT LX LY LZ KA 28 28 21.5 5.
PAGE 51
FZ GB H KA MM 10 16 15 15 15 18.3 17 20 8 8 17.5 19 5.5 5.5 2.3 2.3 33 33 20 20 42 42 5 5 28 28 4.2 5.2 M4 x 0.7 M5 x 0.8 S Z 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to 15 st 30 st 45 st 60 st 75 st 100 st 125 st 150 st 45.5 53 65 77 − − − − 45.5 54 66 78 84 108 126 138 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to 15 st 30 st 45 st 60 st 75 st 100 st 125 st 150 st 81.5 89 101 113 − − − − 81.5 90 102 114 120 144 162 174 NA NB NDh8 NN 4.8 4.8 0 10−0.022 0 12−0.
PAGE 52
Series CJ2K Single Acting, Spring Extend: Basic (B) øNDh8 CJ2KB Bore size – Stroke TZ Section Y detail Mounting nut NN Y GA Piping port M5 x 0.8 øC 0 BB−0.3 A F NA 0 BA−0.3 KA B 0 BB−0.3 øC A Rod end nut MM 0 BA−0.3 NB H + Stroke S + Stroke Z + 2 x Stroke For details of the mounting nut, refer to page 12. Bore size 10 16 [mm] S A BA BB CA CB F GA H KA MM NA NB NDh8 15 15 12 17 14 15 18.3 18.3 20 20 8 8 8 8 0 28 4.2 M4 x 0.7 12.5 4.8 10−0.022 0 28 5.2 M5 x 0.8 12.5 4.
PAGE 53
3.2 6.5 8 8 4.2 5.2 R U M4 x 0.7 12.5 17.8 M5 x 0.8 12.5 22.8 5 8 8 10 Z 10 16 31 to 45 st 104 107 46 to 60 st 116 119 31 to 45 st 68 69 Single Acting, Spring Return/Extend 61 to 76 to 101 to 126 to 75 st 100 st 125 st 150 st − − − − 87 111 129 141 ZZ 61 to 76 to 101 to 126 to 5 to 16 to 75 st 100 st 125 st 150 st 15 st 30 st − − − − 89.5 97 125 149 167 179 94.
PAGE 54
Series CJ2K Single Acting, Spring Extend: Double Foot (M) CJ2KM Bore size – Stroke TZ 4 x øLC Mounting hole H + Stroke Mounting nut F GA Piping port M5 x 0.8 Mounting nut F Rod end nut Cover surface LT LT KA MM LH LB LY NN A X Y NA LX LZ X Y NB S + Stroke LS + Stroke Z + 2 x Stroke For details of the mounting nut, refer to page 12. [mm] LS Bore size 10 16 A F 15 15 GA 8 8 8 8 H 28 28 KA LB LC LH 5 to 16 to 31 to 46 to 61 to 76 to 101 to 126 to LT LX LY LZ 4.2 21.5 5.
PAGE 55
B C F FB FC FT FX FY FZ GA H KA MM NA NB NN 10 16 15 15 15 18.3 17 20 8 8 17.5 19 5.5 5.5 2.3 2.3 33 33 20 20 42 42 8 8 28 28 4.2 5.2 M4 x 0.7 M5 x 0.8 12.5 12.5 4.8 4.8 M10 x 1.0 M12 x 1.0 5 6 7 9 Z 5 to 15 st 16 to 30 st 31 to 45 st 46 to 60 st 61 to 75 st 76 to 100 st 101 to 125 st 126 to 150 st 84.5 92 104 116 − − − − 84.
PAGE 56
Air Cylinder: Built-in Speed Controller Type Double Acting, Single Rod Series CJ2Z ø10, ø16 How to Order Bore size 10 10 mm 16 16 mm Cylinder standard stroke [mm] Refer to “Standard Strokes” on page 52. CJ2Z L 16 60 With auto switch Z CDJ2Z L 16 60 Z M9BW With auto switch B Auto switch ∗ For applicable auto switches, refer to the table below.
PAGE 57
Allowable kinetic energy 0.035 J 0.090 J ∗ No freezing Standard Strokes Double acting, Single rod, Rubber bumper [mm] Standard stroke 10 15, 30, 45, 60, 75, 100, 125, 150 16 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 ∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Made to Order Mounting and Accessories/For details, refer to page 12. (For details, refer to pages 87 to 95.
PAGE 58
Series CJ2Z Weights [g] Bore size [mm] Basic Basic weight Axial piping (When the stroke Double clevis (including clevis pin) is zero) Head-side bossed Additional weight per 15 mm of stroke Single foot Mounting bracket Double foot weight Rod flange Head flange Single knuckle joint Double knuckle joint (including knuckle pin) Accessories Rod end cap (Flat type) Rod end cap (Round type) T-bracket 10 16 36 36 40 37 4 8 16 5 5 17 61 61 68 63 7 25 50 13 13 23 25 21 1 1 32 2 2 50 ∗ Mounting nut and rod
PAGE 59
For details of the mounting nut, refer to page 12. A B C D F GA GB H MM NA NB NDh8 NN 10 16 15 15 17 4 8 7.5 6.5 28 M4 x 0.7 21 18 0 8−0.022 15 18.3 20 5 8 7.5 6.5 28 M5 x 0.8 21 18 0 10−0.022 WA WB WW S Z M8 x 1.0 14.4 13.5 45 63 91 M10 x 1.0 14.4 13.5 45 64 92 Double-side Bossed (E) Direct Mount øNDh8 øNDh8 CJ2ZE Bore size – Stroke Z Built-in Speed Controller [mm] Bore size GA NN Section Y detail YY NN GB Piping port 2 x M5 x 0.
PAGE 60
CJ2Z Series Double Clevis (D) CJ2ZD Bore size – Stroke Z +0.030 0 øCDH9 Mounting nut –0.030 GA Clevis pin (øCdd9 –0.060) NB GB Rod end nut Piping port 2 x M5 x 0.8 WW ° 0 B−0.3 0 CZ−0.3 øD øC øC MM A CX+0.2 +0.1 F 0 B−0.3 NA U S + Stroke Z + Stroke ZZ + Stroke H 0 CZ−0.3 R WB WA ∗ A clevis pin and retaining rings are included. Bore size A B C CD CX 10 16 15 15 17 3.3 15 18.3 20 5 [mm] CZ D GA GB H MM NA NB R U WA WB WW S 3.2 15 4 7.5 19.
PAGE 61
For details of the mounting nut, refer to page 12. [mm] Bore size A B C D F GA GB H LB LC LH LS LT LX LY LZ 10 16 15 15 17 4 8 7.5 6.5 28 15 4.5 15 18.3 20 5 8 7.5 6.5 28 23 5.5 14 9 MM NA NB NN WA WB WW S X Y Z 77 1.6 24 16.5 32 M4 x 0.7 21 18 M8 x 1.0 14.4 13.5 45 63 5 7 103 82 2.3 33 18 M10 x 1.0 14.4 13.5 45 64 6 9 107 25 42 M5 x 0.
PAGE 62
Series CJ2Z Head Flange [g] CJ2ZG Bore size – Stroke Z Mounting nut Mounting nut Rod end nut Cover surface GA NN WW NN ° FB FY 0 B−0.3 øD øC MM GB Piping port 2 x M5 x 0.8 FX FZ A 2 x øFC Mounting hole F NA 0 B−0.3 FT NB H S + Stroke F Z + Stroke WA WB For details of the mounting nut, refer to page 12. [mm] Bore size A B C D F FB FC FT FX FY FZ GA GB H MM 10 16 15 15 17 4 8 13 4.5 1.6 24 14 32 7.5 6.5 28 M4 x 0.7 21 18 M8 x 1.0 14.4 13.
PAGE 63
— S n Without auto switch ∗ For applicable auto switches, refer to the table below. 2 pcs. 1 pc. “n” pcs.
PAGE 64
Series CJ2ZW Specifications Space-saving air cylinder with speed controller built-in cylinder cover 10 Bore size [mm] Action 16 Double acting, double rod Fluid Air Proof pressure 1 MPa Maximum operating pressure 0.7 MPa Minimum operating pressure 0.1 MPa Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C∗ Ambient and fluid temperature Cushion Rubber bumper Lubrication Not required (Non-lube) +1.
PAGE 65
CDJ2ZWB10/16-쏔Z-B Description Rod cover Cylinder tube Piston rod Piston A Piston B Bumper Cushion needle Mounting nut Material Aluminium alloy Stainless steel Stainless steel Aluminium alloy Aluminium alloy Urethane Carbon steel Rolled steel Note Clear hard Anodised Electroless nickel plating Zinc chromated No.
PAGE 66
Series CJ2ZW Basic (B) CJ2ZWB Bore size – Stroke Z øNDh8 Rod end nut Mounting nut Y GA NN WW Piping port 2 x M5 x 0.8 ° 0 B−0.3 øD øC MM A Section Y detail F NA NA H F H + Stroke S + Stroke Z + 2 x Stroke WA 0 B−0.3 A WA For details of the mounting nut, refer to page 12. [mm] Bore size A B C D F GA H MM NA NDh8 10 16 15 15 17 4 8 7.5 28 M4 x 0.7 21 0 8−0.022 15 18.3 20 5 8 7.5 28 M5 x 0.8 21 0 10−0.022 NN WA WW S Z M8 x 1.0 14.
PAGE 67
For details of the mounting nut, refer to page 12. Bore size A B C D F FB FC FT FX FY FZ GA H MM NA NN 10 16 15 15 17 4 8 13 4.5 1.6 24 14 32 7.5 28 M4 x 0.7 21 15 18.3 20 5 8 19 5.5 2.3 33 20 42 7.5 28 M5 x 0.8 21 WA WW S [mm] Z M8 x 1.0 14.4 45 66 122 M10 x 1.0 14.
PAGE 68
Air Cylinder: Direct Mount Type Double Acting, Single Rod Series CJ2R ø10, ø16 How to Order Cylinder standard stroke [mm] Refer to “Standard Strokes” on page 64. CJ2RA 16 60 With auto switch Z CDJ2RA 16 60 Z M9BW With auto switch B Made to Order Auto switch (Built-in magnet) Refer to page 64 for details. ∗ For applicable auto switches, refer to the table below.
PAGE 69
50 to 750 mm/s Allowable kinetic energy 0.035 J 0.090 J ∗ No freezing Symbol Standard Strokes Double acting, Single rod, Rubber bumper [mm] Standard stroke 10 15, 30, 45, 60, 75, 100, 125, 150 16 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 Built-in Speed Controller Bore size ∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Made to Order (For details, refer to pages 87 to 95.
PAGE 70
Series CJ2R Clean Series 10-CJ2RA Bore size Stroke Head cover port location Z Clean Series Air cylinder which is applicable for the system which discharges leakage from the rod section directly into the outside of clean room by relief port and making an actuator’s rod section having a double seal construction. Specifications Action Bore size [mm] Maximum operating pressure Minimum operating pressure Cushion Standard stroke [mm] Auto switch Mounting Double acting, Single rod 10, 16 0.7 MPa 0.
PAGE 71
Non-rotating Rod CDJ2RA10/16-쏔Z-B Component Parts Description Rod cover Head cover Cylinder tube Piston rod Piston A Piston B Bumper Material Aluminium alloy Aluminium alloy Stainless steel Stainless steel Aluminium alloy Aluminium alloy Urethane Note Clear hard Anodised Clear hard Anodised No. 8 9 10 11 12 13 Description Rod seal Piston seal Tube gasket Wear ring Rod end nut Magnet Material NBR NBR NBR Resin Rolled steel Note Zinc chromated — Built-in Speed Controller No.
PAGE 72
Air Cylinder: Direct Mount Type Single Acting, Spring Return/Extend Series CJ2R ø10, ø16 How to Order Action S Single acting, Spring return T Single acting, Spring extend Cylinder standard stroke [mm] Refer to “Standard Strokes” on page 68. CJ2RA 16 45 S With auto switch Z CDJ2RA 16 45 S With auto switch B Z M9BW Auto switch Made to Order ∗ For applicable auto switches, refer to the table below. (Built-in magnet) Mounting Refer to page 68 for details.
PAGE 73
0.090 J Standard Strokes Single acting, Spring return, Rubber bumper [mm] Single acting, Spring extend, Rubber bumper Standard stroke 10 15, 30, 45, 60 16 15, 30, 45, 60, 75, 100, 125, 150 ∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Accessories /For details, refer to page 12.
PAGE 74
Series CJ2R Weights Spring Return [g] Bore size [mm] Mounting 15 stroke 30 stroke 45 stroke 60 stroke Basic weight 75 stroke 100 stroke 125 stroke 150 stroke Single knuckle joint Double knuckle joint Accessories (including knuckle pin) Rod end cap (Flat type) Rod end cap (Round type) 10 Basic 42 49 59 68 16 Axial 42 49 59 68 Basic 81 97 114 132 154 187 224 246 Axial 81 97 114 132 154 187 224 246 17 23 25 21 1 1 2 2 Spring Extend [g] Bore size [mm] Mounting 15 stroke 30 stroke 45 stroke 60 s
PAGE 75
C D GB H L LB LD LH LX MM NA NB X Y 10 16 15 12 14 4 5 20 23 16 ø3.5 through, ø6.5 counterbore depth 4 8 12 M4 x 0.7 12.8 9.5 28 8 15 18.3 20 5 5 20 26 20 ø4.5 through, ø8 counterbore depth 5 10 16 M5 x 0.8 12.8 9.
PAGE 76
Air Cylinder: Direct Mount, Non-rotating Rod Type Double Acting, Single Rod Series CJ2RK ø10, ø16 How to Order Cylinder standard stroke [mm] Refer to “Standard Strokes” on page 72. CJ2RKA 16 60 With auto switch Z CDJ2RKA 16 60 Z M9BW With auto switch B Auto switch (Built-in magnet) ∗ For applicable auto switches, refer to the table below. Mounting A Bottom mounting style Made to Order Refer to page 72 for details.
PAGE 77
+1.0 0 Stroke length tolerance ±1.5° Rod non-rotating accuracy 50 to 750 mm/s Allowable kinetic energy 0.035 J Non-rotating Rod Piston speed ±1° 0.090 J ∗ No freezing Standard Strokes Double acting, Single rod, Rubber bumper [mm] Standard stroke 10 15, 30, 45, 60, 75, 100, 125, 150 16 15, 30, 45, 60, 75, 100, 125, 150, 175, 200 ∗ Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.) Made to Order (For details, refer to pages 87 to 95.
PAGE 78
Series CJ2RK Construction (Not able to disassemble) i q !0 e r !3 u y o t !1 w !4 CDJ2RKA10, 16-쏔Z-B !2 Component Parts No. 1 2 3 4 5 6 7 Description Rod cover Head cover Cylinder tube Piston rod Piston A Piston B Bumper Material Aluminium alloy Aluminium alloy Stainless steel Stainless steel Aluminium alloy Aluminium alloy Urethane Note Clear hard Anodised Clear hard Anodised No.
PAGE 79
Head cover port location — Perpendicular to axis R Axial A B Number of auto switches — S n ∗ Not applicable to single acting, spring extend (T). 2 pcs. 1 pc. Rail mounting Band mounting ∗ For rail mounting, screws and nuts for 2 auto switches come with the rail. ∗ Refer to page 84 for auto switch mounting brackets. “n” pcs.
PAGE 80
Series CJ2RK Specifications A cylinder which rod does not rotate because of the hexagonal rod shape. Non-rotating accuracy ø10: ±1.5°, ø16: ±1° Can operate without lubrication. 10 Bore size [mm] Action 16 Single acting, Spring return/Single acting, Spring extend Fluid Air Proof pressure 1 MPa Maximum operating pressure 0.7 MPa Minimum operating pressure 0.
PAGE 81
45 stroke 57 110 60 stroke 72 72 60 stroke 66 126 135 135 75 stroke 157 157 100 stroke 191 125 stroke 150 stroke Single knuckle joint Accessories 17 Basic weight 75 stroke 147 191 100 stroke 177 228 228 125 stroke 213 251 251 150 stroke 234 23 Single knuckle joint 17 23 Double knuckle joint (including knuckle pin) 25 21 Double knuckle joint (including knuckle pin) 25 21 Rod end cap (Flat type) 1 2 Rod end cap (Flat type) 1 2 Rod end cap (Round type) 1 2 Rod
PAGE 82
CJ2RK Series Single Acting: Bottom Mounting Style Spring return: CJ2RK Bore size – Stroke S Head cover port location Z X Rod end nut 2 x LD Piping port Breather hole MM LX L 0 B−0.3 øC Piping port M5 x 0.8 GB Y KA 0 B−0.3 A H Head cover shape NA NB S + Stroke Z + Stroke Head cover port location Axial location (R) LH LB Rod section ∗ The overall cylinder length does not change. [mm] Bore size A B C GB H KA L LB LD LH LX MM NA NB X Y 10 16 15 12 14 5 20 4.
PAGE 83
B A ≈Hs CJ2W CJ2 CJ2K CJ2K CJ2Z Double Acting, Single Rod B Single Acting, Spring Return/Extend Non-rotating Rod Direct Mount Auto switch Made to Order Auto Switch A ≈Hs Direct Mount, Non-rotating Rod Auto switch 16.5 D-C7쏔/C80 D-C73C쏔/C80C Double Acting, Single Rod Single Acting, Spring Return/Extend Standard A and B are the dimensions from the end of the head cover/rod cover to the end of the auto switch. 16.5 D-H7쏔 D-H7쏔W D-H7BA D-H7NF D-H7C B CJ2ZW ( ): Dimension of the D-M9쏔AV.
PAGE 84
Series CJ2 Auto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height D-A9쏔 Auto switch ≈Hs Auto switch ≈Hs D-M9쏔 D-M9쏔W D-M9쏔A A 23.5 (25.5) B 12.5 12.5 A 26 (23.5) ( ): Dimension of the D-M9쏔A. A 12.5 D-A9쏔V Auto switch Auto switch 21.5 (23.5) B 14.5 ≈Hs A 14.5 23.5 B 12.5 ( ): Dimension of the D-M9쏔AV.
PAGE 85
(1.5) 2.5 3 3 2 2 [mm] D-A7첸 D-A80 D-A9첸 D-A9첸V A B D-F7NT D-A79W Bore size A B A B A B A B A B 10 16 4.5 4.5 0.5 0.5 3 3 3.5 3.5 8.5 8.5 0.5 0.5 5 5 1 1 3.5 3.5 4 4 9 9 1 1 ∗ Adjust the auto switch after confirming the operating condition in the actual setting.
PAGE 86
Series CJ2 Auto Switch Proper Mounting Position (Detection at stroke end) and Its Mounting Height/Single Acting, Spring Return Type (S) Auto Switch Proper Mounting Position: Spring Return Type (S) · Standard Type (CDJ2첸첸첸-첸SZ) · Non-rotating Rod Type (CDJ2K첸첸첸-첸SZ) · Direct Mount Type (CDJ2R첸첸첸-첸SZ) · Direct Mount, Non-Rotating Rod Type (CDJ2RK첸첸첸-첸SZ) Auto switch model Band mounting D-A9첸 Rail mounting 10 to 15 st 16 to 30 st 31 to 45 st 46 to 60 st 10 9 16.5 28.5 40.5 16 8.
PAGE 87
13 20.5 32.5 44.5 6.5 12.5 21 33 45 D-C7첸/C80 D-C73C D-C80C 10 2.5 9.5 17 29 41 16 3 9 17.5 29.5 41.5 D-H7첸/H7C D-H7첸W/H7BA D-H7NF 10 1.5 8.5 16 28 40 16 2 8 16.5 28.5 40.5 D-A9첸 D-A9첸V 10 0.5 7.5 15 27 39 16 1 7 15.5 27.5 39.5 D-M9첸/M9첸V D-M9첸W/M9첸WV D-M9첸A/M9첸AV 10 4.5 11.5 19 31 43 16 5 11 19.5 31.5 10 3 10 17.5 29.5 16 3.5 9.5 18 30 42 10 3.5 10.5 18 30 42 16 4 10 18.5 30.5 42.5 10 8.5 15.5 23 35 47 16 9 15 23.
PAGE 88
Series CJ2 Minimum Stroke for Auto Switch Mounting [mm] Auto switch mounting Band mounting Auto switch model With 1 pc.
PAGE 89
13 5 5 D-F7첸/J79/F7첸W/J79W D-F7첸V/F7첸WV/F79F D-J79C/F7BA/F7BAV D-F7NT ∗ Values which include hysteresis are for guideline purposes only, they are not a guarantee (assuming approximately ±30% dispersion) and may change substantially depending on the ambient environment.
PAGE 90
Series CJ2 Other than the applicable auto switches listed in “How to Order”, the following auto switches are mountable. Refer to the Auto Switch Guide for the detailed specifications.
PAGE 91
Prior to Use Example of AND (Series) and OR (Parallel) Connection ∗ When using solid state auto switches, ensure the application is set up so the signals for the first 50 ms are invalid.
PAGE 92
CJ2 Series Simple Specials/Made to Order Please contact SMC for detailed specifications, delivery and prices. 왎 Simple Specials The following special specifications can be ordered as a simplified Made-to-Order. There is a specification sheet available on paper and CD-ROM. Please contact your SMC sales representatives if necessary.
PAGE 93
Page 93 Page 94 Page 94 Page 95 Page 95 CJ2 CJ2W CJ2 CJ2K CJ2K Double Acting, Single Rod Page 92 CJ2Z Page 92 CJ2ZW Page 91 Made to Order Auto Switch CJ2RK Page 91 CJ2RK Page 90 CJ2R Double Acting, Double Rod Standard Non-rotating Rod Page 90 Double Acting, Single Rod Page 90 Single Acting, Spring Return/Extend Double rod Double Acting, Single Rod Single rod Page Built-in Speed Controller CJ2RK (Direct mount, Non-rotating rod type) Double acting Single acting Single rod Single rod S
PAGE 94
Series CJ2 Simple Specials These changes are dealt with Simple Specials System.
PAGE 95
Series CJ2 Made to Order XB6 Heat resistant cylinder Symbol Built-in Speed Controller -XB7 Air cylinder which changed the seal material and grease, so that it could be used even at lower temperature down to – 40°C.
PAGE 96
Series CJ2 Symbol 4 Special Port Location -XC3 Compared with the standard type, a cylinder which changes the connection port location of rod/head cover.
PAGE 97
How to Order CJ2 Mounting style Bore size ∗ Except clevis type Z Stroke XC9 Dimensions (Dimensions other than below are the same as standard type.) Adjustable stroke cylinder/ Adjustable retraction type BM Adjusting bolt Symbol ZZ + Stroke Built-in Speed Controller Adjustable range Max.30 [mm] Bore size BM ZZ 10 16 M5 x 0.8 74 M5 x 0.8 75 ∗ Dimensions except mentioned above are the same as standard type.
PAGE 98
Series CJ2 Symbol 8 Dual Stroke Cylinder/Single Rod Type -XC11 Two cylinders can be integrated by connecting them in line, and the cylinder stroke can be controlled in two stages in both directions. Specifications: Same as standard type Applicable Series Series Description ∗ Please contact SMC for each manufacturable stroke length.
PAGE 99
-XC51 The one with hose nipple attached in order to save time for assembly at the time of shipment.
PAGE 100
Series CJ2 Symbol 11 Grease for Food Processing Equipment -XC85 Food grade grease (certified by NSF-H1) is used as lubricant.
PAGE 101
CJ2 Specific Product Precautions 1) Tighten the retaining screws to an appropriate tightening torque within the range given below. ø10: 10.8 to 11.8 N·m, ø16: 20 to 21 N·m 2) Do not operate it in such a way that rotational torque would be applied to the piston rod. If rotational torque is applied, the nonrotating guide will become deformed, thus affecting the nonrotating accuracy. Allowable rotational torque (N·m) ø10 ø16 0.02 0.
PAGE 102
PAGE 103
PAGE 104
Safety Instructions Caution: These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC)∗1), and other safety regulations. Caution indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury.