Datasheet

1610
Bore size (mm)
Action
Fluid
Proof pressure
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Cushion
Lubrication
Stroke length tolerance
Rod non-rotating accuracy
Piston speed
Allowable kinetic energy
50 to 750 mm/s
Specifications
±1° ±1.5°
+1.0
0
∗ No freezing
Bore size
10
16
15, 30, 45, 60
15, 30, 45, 60, 75, 100, 125, 150
Standard Stroke
(mm)
Accessory/For details, refer to page 51.
∗ Knuckle pin and retaining ring are shipped together with double knuckle joint.
Single acting, Spring return/Single acting, Spring extend
Air
1 MPa
0.7 MPa
0.15 MPa
Without auto switch: –10°C to 70°C, With auto switch: –10°C to 60°C
∗
Rubber bumper
Not required (Non-lube)
∗
Manufacture of intermediate strokes at 1 mm intervals is possible. (Spacers are not used.)
—XA쏔
—XC51
Change of rod end shape
With hose nipple
Symbol
Specifications
(N)
Spring Force
10
16
6.86
14.2
3.53
6.86
Standard stroke
0.035 J 0.090 J
Refer to page 62 and 70 before handling.
Precautions
• Minimum stroke for auto switch mounting
• Proper auto switch mounting position (detection at stroke end) and mounting height
• Operating range
• Switch mounting bracket part no.
Refer to pages 117 to 123 for cylinders with auto switches.
107
Made to Order Specifications
(For details, refer to pages 1380 and 1479.)
Series CJ2RK
Air Cylinder: Direct Mount, Non-rotating Rod Type
Single Acting, Spring Return/Extend
Non-rotating accuracy
ø10: ±1.5°, ø16: ±1°
Can operate without lubrication.
A cylinder which rod does not
rotate because of the hexagonal
rod shape.
Single acting,
Spring extend
JIS Symbol
Single acting,
Spring return
Standard equipment
Option
Rod end nut
Single knuckle joint, Double knuckle joint
∗
Bore size
(mm)
Retracted side Extended side
CJ1
CJP
CJ2
CM2
CG1
MB
MB1
CA2
CS1
CS2
Individual
-X쏔
D-쏔
-X쏔
Technical
data
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 107