Datasheet

Sliding Resistance of the Low Friction Side
Axial Perpendicular
Either perpendicular to the cylinder axis or in-line with the cylinder
axis is available for basic style.
Mounting Style and Accessory /For details, refer to page 51.
10
CJ-L010B
CJ-F010B
CJ-T010B
16
CJ-L016B
CJ-F016B
CJ-T016B
(g)
10
24
4
8
5
4
16
55
6.5
20
15
10
Operating pressure (MPa)
Sliding resistance
∗
(MPa)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
0.01
0.02
0.03
0.04
0.05
0.06
0.07
0.08
ø10
ø16
∗ Conversion into the cylinder operating pressure:
Head Cover Port Location
92
Series CJ2Q
∗ Pin and retaining ring are shipped together with double clevis and
double knuckle joint.
Mounting
Standard
equipment
Option
Mounting nut
Rod end nut
Clevis pin
Single knuckle joint
Double knuckle joint
∗
T-bracket
Basic
style
Axial
foot style
Rod side
flange
style
Double
∗
clevis
style
Mounting Bracket Part No.
Bore size (mm)
Mounting bracket
Foot bracket
Flange bracket
T-bracket
∗
∗ T-bracket is used with double clevis (D).
Mass
Bore size (mm)
Basic mass
∗
Additional mass per each 15 mm of stroke
Mounting
bracket
mass
Axial foot style
Rod side flange style
Double clevis style (With pin)
∗∗
∗ Mounting nut and rod end nut are included in the basic mass.
∗∗ Mounting nut is not attached to the double clevis style, so the mounting
nut mass is already subtracted.
Calculation: (Example) CJ2QL10-45
• Basic mass ························· 24 (ø10)
• Additional mass ·················· 4/15 stroke
• Cylinder stroke···················· 45 stroke
• Mounting bracket mass ······ 8 (Axial foot style)
24 + 4/15 x 45 + 8 = 44 g
P0015-P0124-E.qxd 08.10.2 4:02 PM Page 92