Spec Sheet

Symbol
AMF
Odor Removal Filter
Series AMF
Efficiently can remove odor in com-
pressed air with an activated carbon
element. The unit is designed for
use in the area such as a clean
room where odors must be avoided.
Can remove odor and gas ingre-
dients in compressed air.
Activated carbon element with large
filtration area.
Easy replacement of elements.
Accessory (Option)
Model
1
8,
1
4
1
4,
3
8
3
8,
1
2
1
2,
3
4
Port size
Mass (kg)
Model
200
AMF150C
500
AMF250C
1000
AMF350C
2000
AMF450C
3700
AMF550C
6000
AMF650
12000
0.3 0.48 0.8 1.3 2.0 4.2 10.5
AMF850
Note) Max. flow at 0.7 MPa.
Max. flow varies depending on the operating pressure.
Refer to “Flow Characteristics” (page 55) and “Maximum Air Flow” (page 54).
1
3
4,
Model/Free Standing Type
Rated flow (l/min (ANR))
Model
8000
AMF800
24000
AMF900
40000
Port size
50(2B)JIS
10K FF flange
50(2B), 80(3B),100(4B)JIS
10K FF flange
100(4B),150(6B)JIS
10K FF flange
Mass (kg)
90 200 410
AMF1000
Model/Piping Support Type
Rated flow (l/min (ANR))
Model
8000
AMF801
Port size
50(2B)JIS 10K FF flange
Mass (kg)
40
24000
AMF901
50(2B), 80(3B),100(4B)JIS 10K FF flange
120
Specifications
Fluid
Max. operating pressure
Min. operating pressure
Proof pressure
Ambient and fluid temperature
Nominal filtration rating
Cleanliness at outlet
Oil mist density at outlet
0.05 MPa
1.5 MPa
Compressed air
1.0 MPa
5 to 60°C
0.01 μm (Filtration efficiency: 99.9%)
Less than 100 particles of 0.3 μm or larger per cubic foot
[Less than 35 particles per 10 liters (ANR)]
(The “AME” series is required on the inlet side.)
Max. 0.004 mg/m
3
(ANR) (≈0.0032 ppm)
(The “AME” series is required on the inlet side.)
AMF150C AMF250C AMF350C AMF450C AMF550C AMF650 AMF850
AM-BM101 AM-BM102 AM-BM103 AM-BM104 AM-BM105 BM56 BM57
Applicable model
Bracket assembly
(with 2 mounting screws)
Modular connection is possible
with AMF150C to 550C.
(For details, refer to page 61.)
AMF150C to 350C AMF450C/550C
AMF650/850
11,
1
2
12
1
2
,
Rated flow (l/min (ANR))
Note)
Made to Order
(For details, refer to page 67.)
Caution
Be sure to read this before handling.
Refer to back pages 1 and 2 for Safety Instructions, “Precautions for
Handling Pneumatic Devices” (M-03-E3A) for Common Precautions,
and back pages 3 through to 7 for Specific Product Precautions.
52