Compressed Air Cleaning Filter Series For Water, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the F.R.L. combination AC series. Possible to make a modular connection with products such as AR series regulator. AMG C, AFF C, AM C, AMD C AMH C, AME C, AMF C Modular connection example Spacer Note) AMH + AME AMH + AME + AMF Note) Spacer with bracket cannot be mounted. Use the attached bracket.
Flow capacity l/min (ANR) Max. flow capacity at 0.
Series AM /AFF Flow capacity l /min (ANR) Max. flow capacity at 0.7 MPa inlet pressure Dust filtration, Oil mist separation Model Micro Mist Separator with Pre-filter Built-in 0.3 μm pre-filter The AM + AMD element have been integrated to achieve a space-saving design. Nominal filtration rating: 0.01 μm [Filtration efficiency: 99.9%] Oil mist density at outlet: Max. 0.1 mg/m3 (ANR) [≈0.
Compressed Air Cleaning Filter Series Series AM /AFF Water Separator Series Solid/Oil Separator Series Main Line Filter Eliminates impurities such as oil and foreign matter, etc. in compressed air. Series Mist Separator Eliminates oil mist in compressed air or rust sized 0.3 μm or more, and foreign matter such as carbon. Micro Mist Separator Eliminates foreign matter sized 0.01 μm or more, or oil particles in an aerosol state.
Water Separator Series AMG Model Can remove water droplets in compressed air. Use this product in cases where “water must be avoided, but not so dry as when an air dryer is used”. Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99%∗ water removal rate∗∗ has been achieved. Caution Water separator can remove water droplets, but it cannot remove moisture. ∗ Condition of inlet air Pressure: 0.
Series AMG How to Order AMG150C to 550C AMG 550C 10 Body size Made to Order 150C 250C 350C 450C 550C (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Symbol Nil X15 X26 Description — With IN-OUT flange N.C., N.O. auto drain, drain piping type Page for details — P.69 P.70 Thread type Symbol Nil F N Option ∗3 Type Rc G∗1 Symbol Nil NPT F H J R V ∗1 Conforms to ISO1179-1.
Series AMG Water Separator How to Order AMG650/850 AMG 650 10 Body size Made to Order 650 850 (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Symbol Nil Thread type Symbol Nil F N X15 X26 X12 Type Rc G NPT Size Symbol Nil 10 14 20 1 11 2 2 Applicable body size 650 J R 850 B Description — Bracket ∗1 ∗1 Bracket is included, (but not assembled).
Series AMG Flow Characteristics Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AMG150C AMG450C AMG850 x Ma Pressure drop (MPa) ine wl . flo Pressure drop (MPa) Pressure drop (MPa) Max. flow line Air flow rate (l /min (ANR)) AMG250C Air flow rate (l/min (ANR)) AMG550C low f ax. line M Pressure drop (MPa) Pressure drop (MPa) Max.
Water Separator Series AMG Construction AMG150C to 550C, AMG650 q IN AMG850 OUT IN OUT r w e Component Parts No. Material Description 1 Body Aluminum die-casted 2 Housing Aluminum die-casted∗ 3 Sight glass Tempered glass Note) Refer to “How to Order Bowl Assembly” on page 63. Note Chrome treated Epoxy coating on inner surface — Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AMG Dimensions AMG150C to 550C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) 34 Drain cock Gray: N.C. Black: N.O. O F R S P Q ø10 one-touch fitting Combination of D: With auto drain (N.O.
Water Separator Series AMG Dimensions AMG650 Auto drain D: With auto drain (N.O.) 180 12 76 34 136 160 4.
Series AMG Dimensions AMG850 Auto drain D: With auto drain (N.O.
Main Line Filter Series AFF Model Can remove impurities such as oil, water and foreign matter in compressed air and can improve the function of a dryer in the downstream, extend the life of precision filter, and prevent trouble with the equipment. Modular connection is possible with AFF2C to 22C.
Series AFF How to Order AFF2C to 22C AFF 22C 10 Body size Made to Order Applicable compressor Symbol output (guide) 2.2 kW 2C 3.7 kW 4C 7.5 kW 8C 11 kW 11C 22 kW 22C (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Thread type Symbol Nil F N Type Rc G∗1 NPT Symbol Nil X6 X15 ∗1 Conforms to ISO1179-1.
Main Line Filter Series AFF How to Order AFF37B/75B AFF 37B 10 Body size Made to Order (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Applicable compressor Symbol output (guide) 37 kW 37B 75B 75 kW Symbol Nil X6 Thread type X37 Type Rc G NPT X15 Symbol Nil F N X17 X26 X12 Port size Symbol Size 10 14 20 1 Symbol Nil 75B J R T 11 2 2 B P.69 P.69 P.70 P.
Series AFF Flow Characteristics/Select the model taking the max. flow capacity into consideration. (Element oil saturation) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AFF2C AFF22C AFF75A Max. flow line Air flow rate (l /min (ANR)) AFF4C Pressure drop (MPa) Max. flow line Pressure drop (MPa) Pressure drop (MPa) Max.
Main Line Filter Series AFF Construction AFF2C to 22C, AFF37B q AFF75B IN OUT IN OUT r w e Component Parts No. Description 1 Body 2 Housing 3 Sight glass Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface — Tempered glass Note) Refer to “How to Order Bowl Assembly” on page 63. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AFF Dimensions AFF2C to 22C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) R S P Q F O 34 Drain cock Gray: N.C. Black: N.O. ø10 one-touch fitting Combination of D: With auto drain (N.O.
Main Line Filter Series AFF Dimensions AFF37B Auto drain 180 D: With auto drain (N.O.) 136 Drain cock: Black 34 160 4.
Series AFF Dimensions AFF75B Auto drain D: With auto drain (N.O.
Mist Separator Series AM Model Can remove oil mist in compressed air and remove particles such as rust or carbon of more than 0.3 μm. Modular connection is possible with AM150C to 550C. (For details, refer to page 61.) Model AM150C AM250C AM350C AM450C AM550C Note) Rated flow (l/min (ANR)) Port size Mass (kg) AM650 AM850 300 750 1500 2200 3700 6000 12000 1 8, 1 4 1 4, 3 8 3 8, 1 2 1 2, 3 4 3 4, 1 1, 1 1 2 0.38 0.55 0.9 1.4 2.1 4.2 1 1 2, 2 10.5 Note) Max. flow at 0.7 MPa. Max.
Series AM How to Order AM150C to 550C AM 550C 10 Body size Made to Order Applicable compressor Symbol output (guide) 2.2 kW 150C 3.7 kW 250C 7.5 kW 350C 11 kW 450C 22 kW 550C (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Thread type Symbol Nil F N Type Rc G∗1 Symbol Nil NPT X6 X15 ∗1 Conforms to ISO1179-1.
Mist Separator Series AM How to Order AM650/850 AM 650 10 Body size Made to Order Applicable compressor Symbol output (guide) 650 37 kW 850 75 kW (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.
Series AM Flow Characteristics (Element oil saturation) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AM450C AM150C AM850 Pressure drop (MPa) Max. flow line Pressure drop (MPa) Pressure drop (MPa) Max. flow line Air flow rate (l /min (ANR)) AM550C Max. flow line Pressure drop (MPa) Pressure drop (MPa) AM250C Air flow rate (l/min (ANR)) Max.
Mist Separator Series AM Construction AM150C to 550C, AM650 q AM850 IN OUT IN OUT r w e Component Parts No. Description 1 Body 2 Housing 3 Sight glass Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface — Tempered glass Note) Refer to “How to Order Bowl Assembly” on page 63. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AM Dimensions AM150C to 550C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) R S P Q F O 34 Drain cock Gray: N.C. Black: N.O. ø10 one-touch fitting Combination of D: With auto drain (N.O.
Mist Separator Series AM Dimensions AM650 Auto drain D: With auto drain (N.O.) 180 Drain cock: Black 34 136 160 4.
Series AM Dimensions AM850 Auto drain 23 6 D: With auto drain (N.O.
Micro Mist Separator Series AMD Model Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments or clean room requiring higher clean air. Modular connection is possible with AMD150C to 550C. (For details, refer to page 61.
Series AMD How to Order AMD150C to 550C AMD 550C 10 Body size Made to Order Thread type 150C 250C 350C 450C 550C Symbol Nil F N (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Type Rc G∗1 Symbol Nil NPT X6 X15 ∗1 Conforms to ISO1179-1.
Series AMD Micro Mist Separator How to Order AMD650/850 AMD 650 10 Made to Order Body size 650 850 Thread type Type Rc G NPT Symbol Nil F N Symbol Nil J R T Port size Symbol Size 10 14 20 Accessory Applicable body size 650 850 Symbol Description Nil — Bracket ∗1 B 1 11 2 2 D Description — Drain guide1 4 female threaded∗4 IN-OUT reversal direction With element service indicator Description Drain cock (Without auto drain) ∗3 N.O.
Series AMD Flow Characteristics/Select the model taking the max. flow capacity into consideration. ( Element oil saturation Initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. Max. flow line Air flow rate (l/min (ANR)) AMD650 Max. flow line Max. flow line Air flow rate (l/min (ANR)) Pressure drop (MPa) Pressure drop (MPa) Air flow rate (l/min (ANR)) AMD80 /81 AMD350C Max.
Micro Mist Separator Series AMD Construction AMD150C to 550C, AMD650 q IN AMD850 OUT IN OUT r w e Component Parts No. Description 1 Body 2 Housing 3 Sight glass Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface — Tempered glass Note) Refer to “How to Order Bowl Assembly” on page 63. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AMD Dimensions AMD150C to 550C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) R S P Q F O 34 Drain cock Gray: N.C. Black: N.O. ø10 one-touch fitting Combination of D: With auto drain (N.O.
Micro Mist Separator Series AMD Dimensions AMD150C to 550C, AMD650 Auto drain D: With auto drain (N.O.) 180 Drain cock: Black 34 136 160 4.
Series AMD Dimensions AMD850 Auto drain D: With auto drain (N.O.
Micro Mist Separator Series AMD Dimensions AMD801/811/9 1 IN OUT OUT ≈ ORIENTATION OUT IN Label (mm) Model AMD801/811 AMD9 1 Connection (Flange) 50(2B)JIS 10K FF flange 50(2B), 80(3B), 100(4B)JIS 10K FF flange A 400 620 øB 280 445 øC 150(6B) 300(12B) D E F G H J 760 795 150 300 270 520 1033 1318 3 3 887 972 AMD800/810/9 0/10 0 ORIENTATION IN OUT 3 x øH holes OUT IN ≈ Label Model AMD800/810 AMD9 0 AMD10 0 Drain Connection (Flange) 50(2B), 80(3B)JIS 10K FF flange 50(2B),
Micro Mist Separator with Pre-filter Series AMH Model Can separate and remove aerosol state oil mist in compressed air and remove particles such as carbon or dust of more than 0.01 μm. Use this product as a pre-filter for compressed air for precision instruments or clean room requiring higher clean air. The conventional pneumatic pressure line, AM series + AMD series have been integrated to achieve a reduction in installation space and in piping labor. Modular connection is possible with AMH150C to 550C.
Series AMH How to Order AMH150C to 550C AMH 550C 10 Body size Made to Order Thread type 150C 250C 350C 450C 550C Symbol Nil (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) Type Rc G∗1 F N Symbol Nil NPT X6 X15 ∗1 Conforms to ISO1179-1.
Micro Mist Separator with Pre-filter Series AMH How to Order AMH650/850 AMH 650 10 Made to Order Body size (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) 650 850 Symbol Nil Thread type Symbol Nil F N X6 X37 X15 X17 X26 X12 Type Rc G NPT Page for details Description — — P.68 With differential pressure gauge (GD40-2-01) P.68 With differential pressure switch (With indicator, 125 VAC, 30 VDC) P.69 With IN-OUT flange P.
Series AMH Flow Characteristics/Select the model taking the max. flow capacity into consideration. ( Element oil saturation Initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AMH150C AMH450C AMH850 Max. flow line Air pressure Pressure drop (MPa) Inlet air pressure Pressure drop (MPa) Pressure drop (MPa) Inlet air pressure Max. flow line Max.
Micro Mist Separator with Pre-filter Series AMH Construction AMH150C to 550C, AMH650 AMH850 q IN IN OUT OUT r w e Component Parts No. Description 1 Body 2 Housing 3 Sight glass Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface Tempered glass — Note) Refer to “How to Order Bowl Assembly” on page 63. Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AMH Dimensions AMH150C to 550C Auto drain C: With auto drain (N.C.) D: With auto drain (N.O.) R S P Q F O 34 Drain cock Gray: N.C. Black: N.O. ø10 one-touch fitting Combination of D: With auto drain (N.O.
Micro Mist Separator with Pre-filter Series AMH Dimensions AMH650 Auto drain D: With auto drain (N.O.) 180 12 76 34 136 160 4.
Series AMH Dimensions AMH850 Auto drain D: With auto drain (N.O.
Super Mist Separator Series AME Model Can separate and adsorb aerosol state fine oil particles in compressed air and change the oil lubricating compressed air to oilless air or equivalent. Use this product for filtration of compressed air requiring higher clean air for painting lines, compressed air for clean rooms and/or equipment where oils must be avoided. Indicates the filter element life by a color change. Accordingly, the replacement time can be judged visually.
Series AME How to Order AME150C to 550C AME 550C 10 Option Body size 150C 250C 350C 450C 550C Symbol Nil F H R V ∗3 Only body/housing is degreasing washed. Thread type Symbol Nil F N Description — Rubber material: Fluororubber For medium air pressure (1.6 MPa) IN-OUT reversal direction Degreasing wash,∗3 white vaseline Type Rc G∗1 NPT Accessory Symbol Nil ∗1 Conforms to ISO1179-1. B Description — Bracket ∗2 ∗2 Bracket is included, (but not assembled).
Super Mist Separator Series AME How to Order AME650/850 AME 650 10 Body size Made to Order (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to the page “Made to Order”.) 650 850 Symbol Nil X12 Thread type Symbol Nil F N Type Rc G NPT Page for details Description — — White vaseline specifications P.
Series AME Flow Characteristics (Element initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. Max. flow line Air flow rate (l /min (ANR)) AME250C AME650 Max. flow line Pressure drop (MPa) AME450C Pressure drop (MPa) Pressure drop (MPa) AME150C Max. flow line Air flow rate (l/min (ANR)) AME550C Air flow rate (l/min (ANR)) AME850 Air flow rate (l /min (ANR)) Max.
Super Mist Separator Series AME Construction AME150C to 550C AME650/850 q IN OUT OUT IN r e w Component Parts No. Description 1 Body 2 Housing 3 Sight glass Note) Refer to “How to Order Bowl Assembly” on page 63. Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface — Tempered glass Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AME Dimensions AME150C to 350C E F R S T P Q D N Bracket (Accessory) O M L V K U B J øW OUT Maintenance space G A I C IN (mm) Model Port size A B C D E F G AME150C AME250C AME350C 1/8, 1/4 83 10 54 63 7.5 63 10 1/4, 3/8 103 14 73 76 5 76 10 3/8, 1/2 132 18 98 90 5 90 10 49 Bracket related dimensions I N J K U V L M W O P Q R 98.5 56 20 5 6 6 12 6 10 35 70 26 54 4.5 1.
Super Mist Separator Series AME Dimensions AME450C/550C P D E R T Q D N F L Bracket (Accessory) M V K U O B J øW OUT Maintenance space G A I C IN H (mm) Bracket related dimensions Model Port size A B C D E F G H I N J K U V L M W O P Q R T AME450C AME550C 1/2, 3/4 151 20 105 106 3 106 10 36 172 90 31 10 9 9 18 9 15 55 111 50 88 3.2 3/4, 1 187 24 130 122 3 122 15 44 206 100 33 10 9 9 18 9 15 65 126 60 102 3.
Series AME Dimensions AME650/850 Bracket (Accessory) IN 2 x port size Maintenance space OUT (mm) Model AME650 AME850 51 Port size 11 2 1, 1 1 2, 2 A B C D E F G H 291 403 32 42 167 235 160 220 — — 160 220 10 10 66 96 Bracket related dimensions I J K L M N O P Q R S 314 406 40 30 15 15 20 24 11 13 150 180 85 120 180 220 76 110 136 184 4.
Odor Removal Filter Series AMF Model Efficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. Can remove odor and gas ingredients in compressed air. Activated carbon element with large filtration area. Easy replacement of elements.
Series AMF How to Order AMF150C to 550C AMF 550C 10 Option Body size 150C 250C 350C 450C 550C Symbol Nil F H R V ∗3 Only body/housing is degreasing washed. Thread type Symbol Nil F N Description — Rubber material: Fluororubber For medium air pressure (1.6 MPa) IN-OUT reversal direction Degreasing wash,∗3 white vaseline Type Rc G∗1 NPT Accessory Symbol Nil ∗1 Conforms to ISO1179-1. B Description — Bracket ∗2 ∗2 Bracket is included, (but not assembled).
Odor Removal Filter Series AMF How to Order AMF650/850 AMF 650 10 Made to Order Body size (“How to Order” and the applicable models are different from those shown on this page. Be sure to refer to “Made to Order”.) 650 850 Symbol Nil Thread type Symbol Nil F N Type Rc G NPT X12 Option Symbol Nil Port size Symbol Size 10 14 20 1 Page for details Description — — White vaseline specifications P.
Series AMF Flow Characteristics/Refer to “Model Selection” on page 54. (Element initial condition) Note) Compressed air over max. flow line in the table below may not meet the specifications of the product. It may cause damage to the element. AMF650 Max. flow line Air flow rate (l/min (ANR)) Air flow rate (l/min (ANR)) AMF800/801 Max. flow line Air flow rate (l/min (ANR)) Air flow rate (m3/min (ANR)) AMF850 Max.
Odor Removal Filter Series AMF Construction AMF150C to 550C q AMF650/850 OUT IN OUT IN r e w Component Parts No. Description 1 Body 2 Housing 3 Sight glass Note) Refer to “How to Order Bowl Assembly” on page 63. Material Note Chrome treated Aluminum die-casted Aluminum die-casted∗ Epoxy coating on inner surface — Tempered glass Note) Sight glass is indicated in the figure for easy understanding of component parts. However, it differs from the actual construction.
Series AMF Dimensions AMF150C to 350C E F R S T P Q D N Bracket (Accessory) O M L V K U B J øW OUT Maintenance space G A I C IN (mm) Model Port size A B C D E F G AMF150C AMF250C AMF350C 1/8, 1/4 83 10 54 63 7.5 63 10 1/4, 3/8 103 14 73 76 5 76 10 3/8, 1/2 132 18 98 90 5 90 10 57 Bracket related dimensions I N J K U V L M W O P Q R 98.5 56 20 5 6 6 12 6 10 35 70 26 54 4.5 1.
Odor Removal Filter Series AMF Dimensions AMF450C/550C P D E R T Q D N F L Bracket (Accessory) M V K U O B J øW OUT Maintenance space G A I C IN H (mm) Bracket related dimensions Model Port size A B C D E F G H I N J K U V L M W O P Q R T AMF450C AMF550C 1/2, 3/4 151 20 105 106 3 106 10 36 172 90 31 10 9 9 18 9 15 55 111 50 88 3.2 3/4, 1 187 24 130 122 3 122 15 44 206 100 33 10 9 9 18 9 15 65 126 60 102 3.
Series AMF Dimensions AMF650/850 Bracket (Accessory) IN 2 x port size Maintenance space OUT (mm) Model Port size A B C D E F G H AMF650 AMF850 1, 11 2 1 1 2, 2 291 403 32 42 167 235 160 220 — — 160 220 10 10 66 96 59 Bracket related dimensions I J K L M N O P Q R S 314 406 40 30 15 15 20 24 11 13 150 180 85 120 180 220 76 110 136 184 4.
Odor Removal Filter Series AMF Dimensions AMF801/901 OUT ORIENTATION ≈ IN IN OUT Label (mm) Model Connection (Flange) 50(2B)JIS 10K FF flange 50(2B), 80(3B), 100(4B)JIS 10K FF flange AMF801 AMF901 A 400 620 øB 280 445 øC 150(6B) 300(12B) D E F G H J 550 570 150 300 270 520 823 1093 3 3 797 867 E F G H AMF800/900/1000 ORIENTATION IN OUT 3 x øH holes OUT IN ≈ Label Model AMF800 AMF900 AMF1000 Drain Connection (Flange) 50(2B)JIS 10K FF flange 50(2B), 80(3B), 100(4B)JIS
Series AMF Spacer for Modular Connection Select a spacer from those listed below when combining modular type AFF2C to 22C, AM 150C to 550C. The spacer must be ordered separately. (Note: Spacer with bracket (Y200T to Y600T) cannot be used.) Caution Modular connection Mount the attached bracket on one side when connecting 2 sets. Mount the attached brackets on both sides when connecting 3 sets or more. As a guideline for the number of brackets, one bracket should be mounted for every 2 products.
Optional Accessory Piping Adapter E (Width across flats) Female thread side B Male thread side A D C Dimensions Thread type and port size Part no.
Bowl Assembly AFF-CA /AM -CA Bowl Assembly Bowl assembly for the AFF and AM series can be replaced without removing the main body from piping if the drain exhaust specification is to be changed from the drain cock type to the auto drain type or if the bowl has been damaged. How to Order Bowl Assembly AFF2C to 22C, AM, AMD, AMH, AMG150C to 550C AM CA Option Body size Symbol Nil 150C 250C 350C 450C 550C F H V Description — Rubber material: Fluororubber For medium air pressure (1.
Bowl Assembly AFF-CA /AM -CA How to Order Bowl Assembly AM, AMD, AMH, AMG Series AM CA 650 AMD AMH AMG Thread type Note 3) Symbol Nil F N Body size Type Rc G NPT Note 3) Corresponded to the drain exhaust symbol D and J. Select according to the body thread type. 650 850 Drain exhaust Symbol A D J Description With drain cock Note 1) With N.O. auto drain With drain guide Note 2) Note 1) Body size 850 is equipped with a ball valve (Rc3/8 female threaded).
AFF-CA /AM -CA Dimensions: AFF, AM, AMD, AMH, AMG Series Size: AFF2C to 22C, AFF37B, AM 150C to 550C, AM 650 (B) (B) 20 34 20 (C) (A) Note 1) (A) Note 1) 20 (A) Note 1) M5 female threaded (B) (B) 1/4 female threaded Drain 1/4 female threaded Note 2) For Rc, G: ø10 For NPT: 3/8 Drain Drain Drain Auto drain for medium air pressure Drain guide Drain cock Auto drain (mm) AFF series Size AM, AMD, AMG, AMH series Size A B C 2C 4C 8C 11C 22C 37B 150C 250C 350C 450C 550C 650 134 1
Bowl Assembly AFF-CA /AM -CA Dimensions: AME, AMF Series AME150C to 550C, AMF150C to 550C (A) (B) (mm) AME, AMF series Size A B 150 250 350 450 550 60 70 90 104 130 63 76 90 106 122 AME650/850, AMF650/850 (A) (B) (mm) AME, AMF series Size A B 650 850 225 319 160 120 66
Compressed Air Cleaning Filter Series Made to Order/Special Specifications Please consult with SMC for detailed specifications, size and delivery. Made to Order Applicable model Contents Symbol AFF 1. With Differential Pressure Gauge (GD40-2-01) 2. With Differential Pressure Switch (With Indicator) AM AMD AME AMF AMG AMH Reference page X6 P.68 X37 3. With IN-OUT Flange X15 4. With Pressure Differential Gauge (GD40-2-01), IN-OUT Flange X17 5. N.C., N.O.
Compressed Air Cleaning Filter Series Made to Order 1 Please consult with SMC for detailed specifications, size and delivery. 1. With Differential Pressure Gauge (GD40-2-01) 2. With Differential Pressure Switch (With indicator) (125 VAC, 30 VDC) A differential pressure gauge that keeps track of the filter life is installed on the filter itself. This facilitates piping and achieves a compact design. Allows visual confirmation of differential pressure which indicates the element life.
Compressed Air Cleaning Filter Series Made to Order 2 Please consult with SMC for detailed specifications, size and delivery. 3. With IN-OUT Flange 4. With Differential Pressure Gauge (GD40-2-01), IN-OUT Flange Makes flange piping easier when filter ports on IN and OUT are flange connection. (Flange material: Carbon steel) The differential pressure gauge is mounted on the main body to monitor the life of a filter by checking its clogging status. Ports on IN and OUT are flange connection type.
Compressed Air Cleaning Filter Series Made to Order 3 Please consult with SMC for detailed specifications, size and delivery. 5. N.C., N.O. Auto Drain, Drain Piping Type 6. White Vaseline Specifications Drain piping type (drain guide specification) to the drain exhaust from N.C. auto drain and N.O. auto drain. N.C. type is not available for the AFF37B and AM 650. Changed the grease for O-rings and gaskets as lubricant to white vaseline.
Compressed Air Cleaning Filter Series Made to Order 4 Please consult with SMC for detailed specifications, size and delivery. 7. Mist Separator for High Flow Rate (0.3 μm) Use this product when the conventional mist separator (AM series) cannot dispose of a high flow rate. The specifications other than the nominal filtration rating are all equivalent to that of the AFF75A to 220A. Specifications Applicable model How to Order AFF75A to 220A ∗ Refer to “How to Order” for standard specifications.
Compressed Air Cleaning Filter Series Special Specifications Please consult with SMC for detailed specifications, size and delivery. Clean Series (10-Series) Copper-free, Fluorine-free (20-Series) Clean Series products are used in cleaner environments such as in clean rooms as compared to a general factory environment. For further details, refer to the Clean Series catalog. To eliminate effects on color CRTs, etc.
Related Products: Auto Drain Valve Series AD402/600 Model/Specifications Drain is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl guard is provided as standard equipment. Model Proof pressure Max. operating pressure Operating pressure range Note) Ambient and fluid temperature Port size Drain port size Mass (g) AD402 AD600 1.5 MPa 1.0 MPa 0.1 to 1.0 MPa –5 to 60°C (No freezing) 1 4, 3 8, 1 2 1.
Related Products: Auto Drain Valve Series AD402/600 Construction/Dimensions AD402 AD600 !4 Valve assembly q Body w O-ring q Body e Gauze u Lever Valve o w O-ring Chamber y i Piston assembly Float t !1 Spring Bowl !0 i Piston Long hole !2 of chamber r O-ring Drain guide !3 Drain Drain Component Parts Working Principle (AD402) • When no pressure is applied inside the bowl !0, float t descends of its own weight and valve o closes the chamber y hole.
Related Products: Motor Operated Auto Drain Series ADM200 Model/Specifications Reliably discharges even highly viscous drain • Highly resistant to dust and highly viscous drain, the valve opens and closes reliably to discharge the drain. High drain discharge capacity • With a large discharge port, a large amount of drain can be discharged in a single operation.
Related Products: Motor Operated Auto Drain Series ADM200 Mounting Example Compressor Aftercooler Air tank Main line filter Air dryer Construction/Dimensions e w Set screw r t q y Manual button Component Parts No. 1 2 Description Body Cap Replacement Parts Material Aluminum die-casted Aluminum die-casted Note Chrome treated Chrome treated No. Description 3 Note) Motor 4 Cam 5 6 Valve assembly O-ring Material — Part no.
Related Products: Heavy Duty Auto Drain Series ADH4000 Specifications Easy maintenance Float type Auto drain type Can maintain without removing the existing piping. Auto drain valve type No need for electric power and no waste of air. Proof pressure Float type auto drain allows automatic drain discharge without electric power. Operating pressure range Note) 0.05 to 1.6 MPa Fluid Compressed air Mounting example Aftercooler Air tank Air dryer N.O.
Related Products: Heavy Duty Auto Drain Series ADH4000 Construction !1 q o i u Component Parts w No. 1 y IN t r 10-1 e Description Body Material Note Aluminum alloy Baking finish 2 Housing Aluminum alloy Baking finish 3 Drain guard Aluminum alloy Baking finish 4 Float 5 Pilot valve 6 Lever Resin 7 Flushing button Brass 8 Orifice 9 Diaphragm No.
Series ADH4000 Dimensions M6 Hexagon socket head cap screw [Applicable hexagon wrench key nominal size 5] M6 Hexagon socket head cap screw [Applicable hexagon wrench key nominal size 5] 108 100 58 33 100 Pilot exhaust port Flushing button Bleed valve (Refer to “Maintenance” 4.) Bracket mounting hole 120 Drain inlet 1/2 female threaded (Refer to “How to Order” for type of thread.) 8 30 10 16 7 200 100 (Maintenance space) Bracket (Option) (Both sides) Model no.
Related Products: Differential Pressure Gauge Series GD40-2-01 Model/Specifications The pressure differential at the inlet and the outlet of compressed air equipment can be viewed at a glance on the differential pressure gauge. It is ideal for the maintenance control of filters. Compact and lightweight Can be installed easily by merely providing a bypass circuit. Provided with a protective cover to prevent hazards. GD40-2-01 Model Fluid Max.
Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or “Danger.” They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC), Japan Industrial Standards (JIS)∗1) and other safety regulations∗2). ∗ 1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Safety Instructions Caution The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is unclear, contact your nearest sales branch.
Series AM /AFF Specific Product Precautions 1 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Design Caution Warning 1. Design the layout so that the mist separator should be installed in an area that is less susceptible to pulsations. 1. Hold the female thread side and tighten to the recommended torque when screwing in the piping material.
Series AM /AFF Specific Product Precautions 2 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Selection Caution Piping Caution 1. About the system composition of purifying compressed air 1. Connect it with IN and OUT ports in proper location. It does not work with the connection reversed.
Series AM /AFF Specific Product Precautions 3 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Air Supply Caution Maintenance Caution 1. The mist separator is not applicable to gases other than compressed air. 1. Replace the element immediately when the time for its replacement has arrived.
Series AM /AFF Specific Product Precautions 4 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Maintenance Others Caution Caution 1. Element interchange • The auto drain operates when the drainage level reaches the top of the sight glass, and the drain will be discharged.
Series AM /AFF Specific Product Precautions 5 Be sure to read this before handling. Refer to back pages 1 and 2 for Safety Instructions, and “Precautions for Handling Pneumatic Devices” (M-03-E3A) for Common Precautions. Others Caution 5. Internal volume of filter container The product can be used as a small capacity air tank by removing the element. Following is the volume of filter containers of the AFF and AM series (when the element is removed).
SMC'S GLOBAL MANUFACTURING, DISTRIBUTION AND SERVICE NETWORK EUROPE AUSTRIA SMC Pneumatik GmbH (Austria) BELGIUM SMC Pneumatics N.V./S.A. BULGARIA SMC Industrial Automation Bulgaria Eood CROATIA SMC Industrijska Automatika d.o.o. CZECH REPUBLIC SMC Industrial Automation CZ s.r.o. DENMARK SMC Pneumatik A/S ESTONIA SMC Pneumatics Estonia OÜ FINLAND SMC Pneumatics Finland Oy FRANCE SMC Pneumatique SA GERMANY SMC Pneumatik GmbH GREECE SMC Hellas E.P.E. HUNGARY SMC Hungary Ipari Automatizálási Kft.
