Datasheet

4
94
■
5 µm
1.0 MPa (10 bar)
VV5QC41-0203FSD0 2 G3/8
VV5QC41-0403FSD0 4 G3/8
VV5QC41-0603FSD0 6 G3/8
VV5QC41-0803FSD0 8 G3/8
VV5QC41-1003FSD0 10 G3/8
VV5QC41-1203FSD0 12 G3/8
VQ4000-PW-03F-Q
VQ4000-PW-03F-Q-XSE502
VVQC1000-F25-1
VVQC1000-P20-1
VVQC1000-P26-1
VVQC1000-M26-1
VVQC1000-T0-1
VVQ4000-10A-1
VVQ4000-P-1-03F
VVQ4000-16A
VVQ4000-R-1-03F
VVQ4000-16A
VVQ4000-20A-1
VQC4101-5 2000 l
n
/min 230 g
VQC4100-5 1700 l
n
/min 230 g
VQC4201-5 2000 l
n
/min 260 g
VQC4200-5 1700 l
n
/min 260 g
VQC4301-5 1900 l
n
/min 280 g
VQC4401-5 2000 l
n
/min 280 g
VQC4501-5 2000 l
n
/min 280 g
Subject to change
SOLENOID VALVES, MECHANICAL AND MANUAL VALVES
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
VQC4000 – solenoid valve, plug-in
Medium Air, lubricated or not lubricated (dry)
Degree of ltration
Max. working pressure
Min. working pressure
5/2 mono stable: 0.2 MPa (2 bar);
5/2 bi stable: 0.15 MPa (1.5 bar);
5/3 with center position: 0.2 MPa (2 bar);
metal seal (all): 0.15 MPa (1.5 bar)
Operating temperature Up to 50 °C (dry air)
Voltage/power
Standard: 24 VDC ±10% (12 VDC
on request)/1 W
Flow See table below
Enclosure
IP67, factory-assembled in Japan; otherwise
IP65; D-sub or at cable, IP50
Manual override Standard: non-lockable
LED, surge voltage suppressor Standard
■ Unmatched exibility and easy conguration because of new internal connector technology
Sub plates
– basic type, add electrical connection below.
Part number Stations Connection
Available with interchangeable push-in fittings Ø8, 10 or 12 mm; contact SMC.
For built-in silencer, add “-S” after SD0. Example: VV5QC41-0203FSD0-S.
Sub plate – single assembly
Part number Type
Standard
With M12 connection
Additions – for sub plates above
Additions
Manifold 13–24 valve stations/added station
1
1. Note! Manifold specification required; for terminal box and 20-pin flat cable
some restrictions apply; contact SMC.
Electrical connections – interface modules
Part number Type
D-sub, 25-pin
Flat cable, 20-pin
Flat cable, 26-pin
Circular connector,
26-pin (IP67)
Terminal box, 20 connections (IP67)
For molded cable (L connection), contact SMC.
Fieldbus – EX250, EX500 and EX600, see chapter 5
Blanking plate – for unused valve stations
Part number
Individual P-supply
Part number
Blocking disc – supply
Part number
Individual R-exhaust
Part number
Blocking disc – exhaust
Part number
Throttle valve block – mounted between valve and manifold
Part number
Valve – plug-in, 24 VDC
Part number
1
Type Flow Weight
5/2 mono stable, rubber seal
5/2 mono stable, metal seal
5/2 bi stable, rubber seal
5/2 bi stable, metal seal
5/3 closed center, rubber seal
5/3 exhausted center, rubber seal
5/3 pressurized center, rubber seal
1. For lockable manual override, add B at end of part number. Example: VQC4101N-5B.
Blanking plate
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]