Datasheet
4
52
SY3000
SY7000SY5000SY3000
PLUG-IN
SJ1000/2000
VQD1000
VK3000
SYJ7000 SYJ5000 SYJ3000
SX5000 SX3000
SX7000
VQZ2000VQZ1000
VQZ3000
SV4000
SV2000 SV1000
SV3000
VQ5000
VQC4000 VQC2000 VQC1000
VF5000 VF3000 VF1000
VQ7-8 VQ7-6
VFR6000
VFR5000
VFR3000 VFR2000
VFR4000
VP4070 VP4050
VZS3000 VZS2000
VQZ2000 VQZ1000
VQZ3000
VS410
VQ5000
VQC4000 VQC2000 VQC1000
VQ7-8
VQ7-6
VFS6000
VFS5000
VFS4000 VFS1000
VFS3000VFS2000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD
1
0.07 2 M5 4
VK
1
0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SYJ 0.12–0.74 0.35 (0.1)
2
M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/
VQC
0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
SY 0.26–2.5 0.35 (0.1)
2
M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFR 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/
VQC
0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Subject to change
SOLENOID VALVES, MECHANICAL AND MANUAL VALVES
SY9000 (see example 1)
Ideal size for actuator control
Seal type,
main valve
Valve
series
Flow
characteristics
A, BE
(2 position/
mono stable)
Applicable cylinder
Speed: 300 mm/s or lower
Power
consumption (W)
Connection size
Threaded connection (G)
Push-in tting (Ø)
Applicable
tubing size (mm) Cv value
3
Rubber sealMetal seal
1. Only available with single coil. 2. Number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Q
n
value in l
n
/min.
Directional control valves – solenoid valves
Seal type
Rubber seal: Resistant to dust when the seals between
the spool and sleeve are made of rubber.
Metal seal: Long life thanks to the air bearing be-
tween metal spool and steel sleeve.
Conditions
■ Pressure: 0.5 MPa
■ Tubing length: 1 m
■ Load: 50%
■ Stroke: 200 mm
■ Speed: 300 mm/s or lower
Cylinder size and speed
Example 1: When using the valve series SY9000
(2500 l
n
/min) for driving Ø40 to Ø100 cylinders, they will
have an average speed under the following conditions.