Datasheet

446
11
■
24 VDC
300, 380, 620, 780, 1100, 1260, 1500, 1900, 2300 mm
IZS31-300P
IZS31-380P
IZS31-620P
IZS31-780P
IZS31-1100P
IZS31-1260P
IZS31-1500P
IZS31-1900P
IZS31-2300P
IZS31-DF
IZS31-DG
IZS31-CP
IZS31-CPZ
IZS31-NT
IZS31-NJ
IZS31-NC
IZS31-NS
IZS31-BE
IZS31-BM
IZS31-FP-X196
IZS30-M1
IZS30-M2
IZS31-E3
IZS31-E4
IZS31-E5
OTHERS
Subject to change
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
IZS31 – ionizer bar
Design principle Corona
Function DC (sensor controlled), pulsed DC and DC
Remaining
charge
±30 V (stainless steel electrode: ±100 V)
Effective range 50–2000 mm (sensor controlled DC: 200–2000 mm)
Supply voltage
Power consumption
200 mA or less (depending on the mode of operation and
connected sensors)
Bar length (standard)
Operating temperature 0 to 50 °C (35–85% relative humidity)
Valid at 300 mm distance and forced airflow.
■ Eliminates static problems ■ Easy to replace and clean the electrodes
■ With or without forced air ow ■ With or without sensors
Ionizer bar
Part number Type
Bar length 300 mm, with 3 m cable
Bar length 380 mm, with 3 m cable
Bar length 620 mm, with 3 m cable
Bar length 780 mm, with 3 m cable
Bar length 1100 mm, with 3 m cable
Bar length 1260 mm, with 3 m cable
Bar length 1500 mm, with 3 m cable
Bar length 1900 mm, with 3 m cable
Bar length 2300 mm, with 3 m cable
Sensors
Part number Type
For rapid elimination of static electricity
For keeping accurate ion balance near
work piece
Cable
Part number Type
Power cable 3 m (supplied with standard
rods above)
Power supply cable 10 m
Electrodes
Part number Type
Electrode material: tungsten (supplied with
standard ionizer bars above)
Electrode for dirty environments
Electrode material: silicon
Electrode material: stainless steel
Fixing brackets
Part number Type
End bracket (2 required per bar)
Center bracket
Bar Length 300–780 mm requires no center bracket, bar length 1100–1500 mm
requires 1 center bracket, rod length 1900–2300 mm requires 2 center brackets.
Accessories
Part number Type
AC adapter 100–240 V
Screwdriver for adjustment trimmer
of ionizing level
Cleaning kit for electrodes
End bracket Center bracket
Fall protection
Part number Type
Extra protection to ensure that
the electrodes do not come off
For the type and number per bar contact SMC.
Fallskydd
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]