Datasheet
10
428
■
TPH KP KPQ KPG
4 MPa (40 bar) 3 MPa (30 bar)
— PP
— PP SUS304
— SUS304
— PP
— EPDM NBR
— — —
KPP-04
KPP-06
KPP-08
KPP-10
KPP-12
KP
KPQ
KPG
01 H 06 -
H
L
T
Y
U
R
04 4 mm
06 6 mm
08 8 mm
10 10 mm
12 12 mm
01
02
03
04
00
04
06
08
10
12
KPG
Subject to change
FITTINGS AND TUBING
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE +31 (0) 20 531 88 88 / INFO@SMCPNEUMATICS.NL
KP – clean room ttings
TPH – tubing for clean rooms
Type
Medium Air, nitrogen, clean water Air
Working pressure Max. 0.7 MPa (7 bar) –0.1 to 1 MPa (–1 to 10 bar)
Test pressure
Operating temperature –20 to 80 ºC –20 to 80 ºC –5 to 60 ºC
Materials
body
stud Brass
chuck
guide,
release bush
seals
tubing Polyolen
The above figures are at 20 °C.
■ Components are cleaned, assembled
and packaged in a cleanroom environment
Blanking plug
Part number Model
Blanking plug, tube connection 4 mm
Blanking plug, tube connection 6 mm
Blanking plug, tube connection 8 mm
Blanking plug, tube connection 10 mm
Blanking plug, tube connection 12 mm
Part number: push-in ttings for clean rooms
Stud material
Plastic (PP)
Nickel plated
brass
Stainless steel
Model
Straight connector
Elbow connector
Branch Tee
Run Tee
Branch “Y”
Push-in reducer
Applicable tube size
Port thread/tube connection
R 1/8 male thread
R 1/4 male thread
R 3/8 male thread
R 1/2 male thread
Same tube size (unions)
4 mm (push-in reducer)
6 mm (push-in reducer)
8 mm (push-in reducer)
10 mm (push-in reducer)
12 mm (push-in reducer)
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE +32 (0) 3 355 1464 / INFO@SMCPNEUMATICS.BE