Datasheet

6
299
■
1.0 MPa (10 bar)
Ø12: 0.07 MPa (0.7 bar); Ø20–63: 0.05 MPa (0.5 bar)
±0.8
40 mA
±0.2 mm
1
IP65
2
L
12 12 mm
20 20 mm
32 32 mm
40 40 mm
50 50 mm
63 63 mm
-32
N
R
H
CE1 200
Z
B
L
F
G
D
25 50 75 100 125 150 175 200 250 300 400 500
12
✔ ✔ ✔ ✔ ✔ ✔
— — — — — —
20
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
— — — —
32 —
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
— —
40 — — —
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
50 — — — — — — —
✔
—
✔
—
✔
63 — — — — — — —
✔
—
✔
—
✔
Subject to change
CYLINDERS, ROTARY ACTUATORS AND SHOCK ABSORBERS
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
CE1 – stroke reading cylinder
Medium Compressed air, lubricated or unlubricated (dry)
Max. working pressure
Min. working pressure
Humidity 25–85% RH (no condensation)
Lubrication No lubrication
Operating temperature 0 to 60 °C
Cushioning
Ø12–32: no; Ø40–63: yes
Piston accuracy,
non-rotating
Installation Threaded end plates, foot brackets, ange brackets
For more information, contact SMC.
■ Measures and reports its position with 0.1 mm resolution
■ Can be used for i.a. quality control and identication
Sensor specication
Cable
Ø7 twisted pair shielded cable. 6 wires
(oil resistant, heat resistant, ame proof).
Standard with connector.
Max. transmission
length
23 m (when using twisted pair shielded
cable with 6 wires)
Power supply 12 to 24 VDC (±10%) ±1% or lower
Power consumption
Resolution 0.1 mm/puls
Accuracy
Output type Open collector (24 VDC, 40 mA)
Output Phase A/phase B phase-shifted output
Impact resistance
30 G, three times each
along X-, Y- and Z-axes
Enclosure
Extension cable
(optional)
5 m, 10 m, 15 m, 20 m (connector)
1. Including errors due to digital display of the counter (CEU1).
2. Cylinder section does not have water resistant enclosure.
Part number: stroke reading cylinder
Cylinder bore
Cushioning
Air cushioning
Without cushioning
Only front cushioning
Only rear cushioning
Connector
With connector
Without connector
Brackets
Standard
Foot bracket
Flange front
Flange rear
Trunnion
Stroke adjustment
Cylinder
bore (mm)
Stroke (mm)
For longer strokes than standard, contact SMC. With bore 12 mm and strokes of 100 mm or
more, extra consideration must be taken to offset load on the piston rod.
Application examples
Can measure dimensions
on work pieces.
Can adjust drilling depth etc,
by measuring work pieces
before drilling.
For CE1 stroke reading cylinder you also
need a counter unit. Contact SMC.
Counter unit
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]