Datasheet

186
2. When using auto switch, it is important to en-
sure that it does not work near strong magnetic
elds, for example, directly adjacent to a weld-
ing transformer or the like. Use special sensors
for this purpose.
Maintenance
• DANGeR!
1. Maintenance of a cylinder may be performed
only in cases where it is technically possible to
remove the cylinder, and then by competent
persons. Only spare parts for the current cyl-
inder type may be used. Use these, after the
manual supplied with the cylinder, has been
read and you have understood its meaning.
2. During service, it is important that the objects
handled in the application are removed before
the supply pressure is turned off, these can
otherwise come loose and cause injury. If an
actuator is dismantled, the supply pressure to
its chambers must be exhausted.
3. If a lter is used, ensure that the condensate is
drained away to prevent it being passed on to
the system. Use preferably automatic drain.
SAFETY, ACTUATORS