Datasheet

5
174
■
24 VDC
EX500-IE1
EX500-IE2
EX500-IE3
EX500-IE4
EX500-IE5
EX500-IE6
EX500-AC003-SSPS
EX500-AC005-SSPS
EX500-AC010-SSPS
EX500-AC030-SSPS
EX500-AC050-SSPS
EX500-AC003-SAPA
EX500-AC005-SAPA
EX500-AC010-SAPA
EX500-AC030-SAPA
EX500-AC050-SAPA
EX500-AP010-S
EX500-AP050-S
EX500-AP010-A
EX500-AP050-A
EX9-AC020EN-PSRJ
EX500-S001
EX500-AC000-S
EX500-Q101
EX500-AC000-S
EX500-IE5
EX500-IE3
EX500-IE1
Subject to change
FIELDBUS
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
Input modules
Sensor type PNP or NPN
Input connectors M8 connector 3-pin or M12 connector 5-pin
Supply voltage
Signal indicator Green LED
Insulation Missing
Power supply Max. 30 mA/channel
Input modules
Part number Description
Input modules, M8, PNP, 2 channels
Input modules, M8, NPN, 2 channels
Input modules, M12, PNP, 2 channels
Input modules, M12, NPN, 2 channels
Input modules, M8, PNP, 8 channels
Input modules, M8, NPN, 8 channels
Cabling
Cable for I/O branches (gateway–interface valve–input modules)
Part number Description
Cable, M12 for EX500, 0,3 m, straight
Cable, M12 for EX500, 0,5 m, straight
Cable, M12 for EX500, 1 m, straight
Cable, M12 for EX500, 3 m, straight
Cable, M12 for EX500, 5 m, straight
Cable, M12 for EX500, 0,3 m, angled
Cable, M12 for EX500, 0,5 m, angled
Cable, M12 for EX500, 1 m, angled
Cable, M12 for EX500, 3 m, angled
Cable, M12 for EX500, 5 m, angled
Cable for power supply
Part number Description
Power cable for EX500, 1 m, straight
Power cable for EX500, 5 m, straight
Power cable for EX500, 1 m, angled
Power cable for EX500, 5 m, angled
Cable for eldbus
Part number Description
Cable, M12 to RJ-45, 2 m,
for Ethernet/IP, D-coded
Interface – for valve manifolds in the SV series
Part number Description
SV-bus interface for PB/DN EX500
Terminating resistor (must be used
if valve interface isn’t connected to
an input module)
Interface
– for valve manifolds in S0700, VQC and SY series
Part number Description
Bus interface for PB/DN EX500
Terminating resistor (must be used
if valve interface isn’t connected to
an input module)
For suitable manifolds, see SV and VQC in chapter 4.
EX500 – serial interface unit (DeviceNet, PROFIBUS DP, EtherNet/IP)
M8 and M12 connectors
can be used on the same unit
For more eldbus connectors and
cabling, see end of this chapter.
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]