Datasheet

5
173
■
EX500-GDN1 EX500-GPR1 EX500-GEN1
DeviceNet
(Release 2.0)
PROFIBUS DP EtherNet/IP
IP65
UL, CSA, CE
EX500-GPR1A
EX500-GDN1
EX500-GEN1
EX500-IB1
EEX500-IB1-E1
EEX500-IB1-E2
EEX500-IB1-E3
EEX500-IB1-E4
EEX500-IB1-E5
EEX500-IB1-E6
EEX500-IB1-E7
EEX500-IB1-E8
EEX500-IB1-T1
EEX500-IB1-T2
EEX500-IB1-T3
EEX500-IB1-T4
EEX500-IB1-T5
EEX500-IB1-T6
EEX500-IB1-T7
EEX500-IB1-T8
Subject to change
FIELDBUS
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
EX500 – serial interface unit
(DeviceNet, PROFIBUS DP, EtherNet/IP)
Gateway unit
Fieldbus protocol
Communication speed
125; 250 or
500 kbps
9,6; 19,2;
93,75; 187,5 or
500 kbps; 1,5; 3;
6 or 12 Mbps
10 Mbps or
100 Mbps
Supply voltage 24 VDC ±10 % (min. voltage 20 VDC)
Power consumption 200 mA or less
Number of I/O Max. 64 inputs/64 outputs
Number of I/O branches 4 branches (max. 16 inputs/16 outputs per branch)
Cable length I/O branches Max. 5 + 5 m per branch
Connector I/O branches M12 connector (8-pin)
Connector
power supply
M12 connector (5-pin)
Operating temp./moisture 5 to 45 °C/35 to 85 % RH (no condensation)
Enclosure
Standards
■ Decentralization of inputs and outputs ■ Modular input and output blocks
Gateway unit
Part number Description
Gateway PROFIBUS DP
Gateway DeviceNet
Gateway EtherNet/IP
EX500 series from SMC
is based on a gateway
module that is connected
to a superior eldbus
protocol for the standards
PROFIBUS DP, DeviceNet
or EtherNet/IP. On the
other side of the Gateway
module, four underlying
branches linked to 16
outputs and 16 inputs
per branch (a total of
64 in and 64 out). The
maximum cable length
per underlying branch is
10 meter (5 + 5 m).
GSD-les and installa-
tion manuals are available
on SMC’s website
www.smc.eu.
Input units
Signal PNP or NPN inputs
Connector I/O branches M12 connector (8-pin)
Number of input modules Max. 8 modules (2 channels per module)
Supply voltage
24 VDC (fed into the cable from the
I/O branch)
Power supply
Max. 650 mA per input block
(16 inputs), i.e. 40 mA per input
Short circuit protection
Cuts power at 1A
Reset via OFF/ON on Gateway
Input units consist of interfaces, end support on DIN rail.
They are not equipped with an input modules. See next
page for selecting the module.
Input units
Part number Description
Input interface EX500
(part of manifold)
Input module 1 station M8
Input module 2 stations M8
Input module 3 stations M8
Input module 4 stations M8
Input module 5 stations M8
Input module 6 stations M8
Input module 7 stations M8
Input module 8 stations M8
Input module 1 station M12
Input module 2 stations M12
Input module 3 stations M12
Input module 4 stations M12
Input module 5 stations M12
Input module 6 stations M12
Input module 7 stations M12
Input module 8 stations M12
Gateway
DIN rail
Interface
End plate
Input module,
8 stations M8.
Note! input modules not
included, see next page.
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]