User Manual

ManualsBrandsSMC ManualsAutomationAir Filter, Regulator and Lubricator

Nil Without auto drain

Ｃ

N.C. (Normally closed) Drain port is closed when pressure is not applied.

＋

Nil Without pressure gauge

Ｇ

Round type pressure gauge (without limit indicator)

＋

Nil Without attachment

Ｔ

Mounting position：AF+T+AR

＋

Nil 0.05 to 0.7 MPa setting

１

0.02 to 0.2 MPa setting

＋

Nil Polycarbonate bowl

２

Metal bowl

６

Nylon bowl

＋

Nil Relieving type

Ｎ

Non-relieving type

＋

Nil

Flow direction：Left to right

Ｒ

Flow direction：Right to left

＋

Nil

Ｚ

Symbol

Description

Option

Float type auto drain

Pressure gauge

Attachment (T-spacer)

Semi-standard

Set pressure

Bowl

Exhaust mechanism

Flow direction

Pressure unit

Name plate, caution plate for bowl, and pressure gauge in imperial units：MPa

Name plate, caution plate for bowl, and pressure gauge in imperial units：psi, °F

Note 3)

Note 4)

Note 1)

Note 5)

Note 6)

Note 1) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl.

Releasing the residual condensate before ending operations for the day is recommended.

Note 2) A 1.0 MPa pressure gauge will be fitted. It is not assembled and supplied loose at the time of shipment.

Note 3) The bracket position varies depending on the T-spacer mounting.

Note 4) Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range.

Note 5) Refer to Chemical data on page 3 for chemical resistance of the bowl.

Note 6) This product is for overseas use only according to the new Measurement Law. (The SI unit type is provided for use in Japan.)

・Option / Semi-standard : Select one each for a to g.

・Option / Semi-standard symbol : When more than

one specification is required, indicate in alphanumeric order.

Example） AC10B-M5CG-T-12NR-A

Note 2)

AC 10 B

A -