Datasheet
L
1
2
Symbol Description
Vq
Option
Note 1)
a Mounting
—
Without mounting option
B
With bracket
H
With set nut (for panel mount)
+
b Float type auto drain
—
Without auto drain
C
Note 2)
N.C. (Normally closed) Drain port is closed when pressure is not applied.
+
c Pressure gauge
—
Without pressure gauge
G
Note 3)
Round type pressure gauge (without limit indicator)
+
Vw
Semi-standard
d Set pressure
Note 4)
—
0.05 to 0.7 MPa setting
1
0.02 to 0.2 MPa setting
+
e Bowl
Note 5)
—
Polycarbonate bowl
2
Metal bowl
6
Nylon bowl
+
f Exhaust mechanism
—
Relieving type
N
Non-relieving type
+
g Flow direction
—
Flow direction: Left to right
R
Flow direction: Right to left
+
h Pressure unit
—
Name plate, caution plate, and pressure gauge in imperial units: MPa
Z
Name plate, caution plate, and pressure gauge in imperial units: psi, °F
AW10
• Option/Semi-standard: Select one each for a to h.
• Option/Semi-standard symbol: When more than one specification is required,
indicate in alphanumeric order.
Example) AW10-M5CG-12NR-A
Symbol
Filter Regulator
q
• Integrated filter and regulator units save space and require less piping.
Filter Regulator
AW10-A
A
How to Order
Refer to page 87 for size 20 to 60.
M5
w
Note 1) Option B, G, H are not assembled and supplied loose at the time of shipment.
Note 2) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl.
Releasing the residual condensate before ending operations for the day is recommended.
Note 3) A 1.0 MPa pressure gauge will be fitted. It is not assembled and supplied loose at the time of shipment.
Note 4) Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range.
Note 5) Refer to Chemical data on page 90 for chemical resistance of the bowl.
85