Datasheet

Symbol Description
앬q
Option
a Float type auto drain
—
Without auto drain
C
Note 1)
N.C. (Normally closed) Drain port is closed when pressure is not applied.
+
b Pressure gauge
—
Without pressure gauge
G
Note 2)
Round type pressure gauge (without limit indicator)
+
앬w
Attachment (T-spacer)
Note 3)
—
Without attachment
T Mounting position: AW+T+AL
+
앬e
Semi-standard
c Set pressure
Note 4)
—
0.05 to 0.7 MPa setting
1
0.02 to 0.2 MPa setting
+
d Bowl
Note 5)
—
Polycarbonate bowl
2
Metal bowl
6
Nylon bowl
+
e
Lubricator lubricant
exhaust port
—
Without drain cock
3
Lubricator with drain cock
+
f Exhaust mechanism
—
Relieving type
N
Non-relieving type
+
g Flow direction
—
Flow direction: Left to right
R
Flow direction: Right to left
+
h Pressure unit
—
Name plate, caution plate for bowl, and pressure gauge in imperial units: MPa
Z
Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F
Note 1) When pressure is not applied, condensate which does not start the auto drain mechanism will be left in the bowl.
Releasing the residual condensate before ending operations for the day is recommended.
Note 2) A 1.0 MPa pressure gauge will be fi tted. It is not assembled and supplied loose at the time of shipment.
Note 3) The bracket position varies depending on the T-spacer mounting.
Note 4) Pressure can be set higher than the specifi cation pressure in some cases, but use pressure within the specifi cation range.
Note 5) Refer to Chemical data on page 46 for chemical resistance of the bowl.
L
21
AC10A M5
w 앬eq
A
Air Combination
Filter Regulator + Lubricator
AC10A-A
• Option/Semi-standard: Select one each for a to h.
• Option/Semi-standard symbol: When more than one specifi cation is required,
indicate in alphanumeric order.
Example) AC10A-M5CG-T-12NR-A
How to Order
Symbol
Refer to page 17 for size 20 to 60.
15