Switch - Ethernet Switch User Manual

OMMAND

INE

NTERFACE

4-90

This example shows how to copy a public-key used by SSH from an TFTP

server. Note that public key authentication via SSH is only supported for

users configured locally on the switch:

delete

This command deletes a file or image.

Syntax

delete [unit:] filename

filename - Name of the configuration file or image name.

unit - Stack unit. (This is unit 1)

Default Setting

None

Command Mode

Privileged Exec

Command Usage

• If the file type is used for system startup, then this file cannot be

deleted.

• “Factory_Default_Config.cfg” cannot be deleted.

• A colon (:) is required after the specified unit number.

Console#copy tftp public-key

TFTP server IP address: 192.168.1.19

Choose public key type:

1. RSA: 2. DSA: <1-2>: 1

Source file name: steve.pub

Username: steve

TFTP Download

Success.

Write to FLASH Programming.

Success.

Console#