- SMC TigerSwitch 10/100/1000 Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
3-156
Default Setting
None
Command Mode
Privileged Exec
Example
map ip precedence (Global Configuration)
Use this command to enable IP precedence mapping (i.e., IP Type of
Service). Use the no form to disable IP precedence mapping.
Syntax
map ip precedence
no map ip precedence
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The precedence for priority mapping is IP Precedence or IP DSCP, and
default switchport priority.
• IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.
Console#show queue cos-map ethernet 1/11
Information of Eth 1/11
Queue ID Traffic class
-------- -------------
012
103
245
367
Console#