- SMC TigerSwitch 10/100/1000 Gigabit Ethernet Switch Management Guide

IGMP S NOOPING C OMMANDS
3-139
ip igmp snooping
Use this command to enable IGMP snooping on this switch. Use the no
form to disable it.
Syntax
ip igmp snooping
no ip igmp snooping
Default Setting
Enabled
Command Mode
Global Configuration
Example
The following example enables IGMP snooping.
Mulitcast Router Commands
ip igmp snooping vlan
mrouter
Adds a multicast router port GC 3-148
show ip igmp snooping
mrouter
Shows multicast router ports PE 3-149
Console(config)#ip igmp snooping
Console(config)#
Command Function Mode Page