- SMC TigerSwitch 10/100/1000 Gigabit Ethernet Switch Management Guide

VLAN C OMMANDS
3-121
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the network,
but communicate as though they belong to the same physical segment.
This section describes commands used to create VLAN groups, add port
members, specify how VLAN tagging is used, and enable automatic
VLAN registration for the selected interface.
Command Function Mode Page
Edit VLAN Groups
vlan database Enters VLAN database mode to add,
change, and delete VLANs
GC 3-122
vlan Configures a VLAN, including VID,
name and state
VC 3-123
Configure VLAN Interfaces
interface vlan Enters interface configuration mode for
specified VLAN
IC 3-124
switchport mode Configures VLAN membership mode
for an interface
IC 3-125
switchport
acceptable-frame-types
Configures frame types to be accepted by
an interface
IC 3-126
swicthport
ingress-filtering
Enables ingress filtering on an interface IC 3-127
switchport native vlan Configures the PVID (native VLAN) of
an interface
IC 3-128
switchport allowed vlan Configures the VLANs associated with
an interface
IC 3-129
switchport gvrp Enables GVRP for an interface IC 3-132
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 3-130