- SMC TigerSwitch 10/100/1000 Gigabit Ethernet Switch Management Guide

C OMMAND L INE I NTERFACE
3-112
Example
spanning-tree transmission-limit
Use this command to configure the minimum interval between the
transmission of consecutive RSTP BPDUs. Use the no form to restore the
default.
Syntax
spanning-tree transmission-limit count
no spanning-tree transmission-limit
count - The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limit the maximum transmission rate for BPDUs.
Example
Console(config)#spanning-tree pathcost method long
Console(config)#
Console(config)#spanning-tree transmission-limit 4
Console(config)#