1000 Gigabit Ethernet Switch Management Guide

ONFIGURING

THE

WITCH

2-96

CLI – The following example adds the string “spiderman” with read/write

access.

Specifying Trap Managers

You can specify up to five management stations that will receive

authentication failure messages and other trap messages from the switch.

Command Usage

• If you do not enter a trap manager host IP address, no notifications are

sent. In order to configure the switch to send SNMP notifications, you

must enter at least one host IP address.

• The switch can send SNMP version 1 or version 2c traps to a host IP

address, depending on the SNMP version that the management station

supports. The default is to send SNMP version 1 traps.

• You can enable or disable authentication messages and link-up-down

messages via the Web interface.

• You can enable or disable authentication messages, link-up-down

messages, or all notification types via the CLI.

Console(config)#snmp-server community spiderman rw 3-58

Console(config)#