Switch - Ethernet Switch User Manual

C
ONFIGURING
802.1
X
P
ORT
A
UTHENTICATION
2-105
Web – Select dot1x, dot1X Configuration. Enable dot1x globally for
the switch, modify any of the parameters required, and then click
Apply.
CLI – This example enables re-authentication and sets all of the
global parameters for dot1x.
Configuring a Port for Authorization
When dot1x is enabled, you need to specify the dot1x
authentication mode configured for each port.
Command Attributes
Status Indicates if authentication is enabled or disabled on
the port.
Console(config)#dot1x max-req 5 3-46
Console(config)#dot1x re-authentication 3-48
Console(config)#dot1x timeout quiet-period 40 3-49
Console(config)#dot1x timeout re-auth 5 3-49
Console(config)#dot1x timeout tx-period 40 3-50
Console(config)#authentication dot1x default radius 3-45
Console(config)#