Switch Management Guide

N AVIGATING THE W EB B ROWSER I NTERFACE
3-9
VDSL 10-1
Global Configuration Configures global VDSL variables which can be
applied to all ports
10-1
VDSL Port
Configuration
Configures communication parameters for VDSL
ports
10-7
Line Profile
Configuration
Configures a list of communication parameters which
can be applied to all VDSL ports or to a selected
group of ports
10-16
VDSL Status
Information
Displays information on VDSL configuration
settings, signal status, and communication statistics
10-21
VDSL Performance
Statistics
Displays performance information including
common error conditions over predefined intervals
for the VDSL line, as well as statistics for Ethernet
traffic and High-Level.Data-Link Control (HDLC)
10-25
Alarm Profile
Configuration
Configures a list of threshold values for error states
which can be applied a selected group of VDSL ports
10-30
CPE Information Displays information on CPE software module
versions, buffer status and version, and performance
counters
10-36
VDSL OAM Controls various functions for VDSL chip on local
switch port and for CPE, resetting the CPE, and
upgrading firmware on CPE
10-41
Address Table 11-1
Static Addresses Displays entries for interface, address or VLAN 11-1
Dynamic Addresses Displays or edits static entries in the Address Table 11-2
Address Aging Sets timeout for dynamically learned entries 11-4
Table 3-2 Switch Main Menu (Continued)
Menu Description Page