User manual

Troubleshooting
34
o If you are using an Audio/Video receiver, please make sure that
your receiver is switched to the correct position corresponding to
the
location where you connected the media node's Audio Left/
Right outputs.
o Verify that the top LED on the front of the Wireless Multimedia
Receiver is On. This means the SMCWMR-AG is in the
boot-up
process.
o Verify that the video output cable from the SMCWMR-AG
is connected properly to your Audio/Video receiver.
o You may have shared folders on your host PC that do not contain
any MP3 files. First verify and record the location of your MP3
files on your hard drive. Remember, these files must have the
extension .mp3.
o Open your MediaServer application, go to the [Shared Folders]
tab and click [Add] to share the MP3s.
o You may have shared folders on your host PC that do not contain
any JPEG or BITMAP files. First verify and record the location of
your picture files. Remember, these files must
have the extension
.jpg, .jpeg, or .bmp.
o Open your MediaServer application, go to the [Shared Folders]
tab and click [Add] to share the files.
I cannot hear any sound.
I have the SMCWMR-AG connected to the TV, but nothing appears
on the screen.
I select [Audio] and any category under it, but I get a
[No Content Available…] error message.
I select [Photo] and any category under it, but I get a [No Content
Available…] error message.