User manual

Configuration for Wireless Operation via TV User Interface

Step 4: Please answer the on-screen questions to complete the setup.

[Network Interface]

Select [Use Wireless (802.11)] to use a wireless network. Remember,

to make a selection, press the [OK] button on your Remote Control.

You will then be asked to input the SSID of your wireless network.

Use the Up/Down arrows on your Remote Control to choose the

appropriate

letters. Use the Left/Right arrows to skip to the next

letter of the SSID.

Press [OK] on your Remote Control when

you have finished.

c) [Encryption enabled?]

Select [Off] if you are not using encryption on your wireless network

and go to Step 4e. Select [Hex Digits] to enter your appropriate

encryption key.

d) If you have selected [Hex Digits] in Step 4c, you will be asked to

input the WEP key of your wireless network. Use the Up/Down

arrows

on your Remote Control to choose the appropriate letters. Use the

Left/Right arrows to skip to the next letter of the SSID. Press [OK] on

your Remote Control when you have finished.

e) [Network Type]

Select [Infrastructure] if you are using an Access Point or a Wireless

Router to connect your SMCWMR-AG to your

wireless network.

Select [Peer to Peer] if you have an Ad-Hoc wireless

network.