User's Manual

C HAPTER 3 | WPS Configuration
PIN Method
– 25 –
Figure 18: Enter a PIN into the Access Point
4. Open the AP/router’s web-based utility and click the WPS link on the
main menu. Then the Figure 13 on page 22 will appear.
5. Click Add device. The screen in Figure 19 appears.
Figure 19: Enter the device’s PIN
6. Select Enter the new device’s PIN and enter the PIN value of the
adapter, click Connect.
7. When Figure 16 on page 23 appears, the WPS configuration is
complete.
ENTER THE PIN FROM
YOUR
AP/ROUTER
DEVICE
1. Open the WPS Utility. You will see the welcome screen, as shown in
Figure 15 on page 23.
2. Click Next to continue. The “Join a Wireless Network” screen displays,
as shown in Figure 20 on page 26.
3. Select the third option, “Enter the PIN from my access point.” Then
enter the PIN value, which is labeled on the bottom of the AP/router.
Click Next.