User's Manual

C HAPTER 3 | WPS Configuration
PBC (Push Button Configuration) Method
– 22 –
PBC (PUSH BUTTON CONFIGURATION) METHOD
1. Press the WPS button of the AP/router. There are two ways:
a. Press the WPS button directly on the front panel of the AP/router, as
shown in Figure 12.
Figure 12: WPS Button
b. Open the AP/router’s web-based utility and click the WPS link on the
main menu. Figure 13 will display. Click Add device, then Figure 14
displays. Select “Press the button of the new device in two minutes”
and click Connect.
Figure 13: WPS Setup
Figure 14: Add a New Device
2. Press the WPS button of the adapter. There are two ways:
a. Press and hold the WPS button of the adapter directly for 2 or 3
seconds.
b. Double-click the WPS icon on the desktop to open the WPS utility.
You will see the welcome screen, as shown in Figure 15. Click Next
to continue, then select “Push the button on my access point” in the
next screen (Figure 16) and click Next.
WPS