User's Manual

SMCWPCIeS-N5 150Mbps Wireless N PCI-E Adapter
16
4. When the following window appears, you have successfully connected to the network.
Figure 3-11
3.2.2 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your Router or AP device.
2) Enter a PIN into your Router or AP device.
(

Note:
This method is only available in Windows XP and Windows Vista.)
Following are the detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your Router or AP device
1. Open SMC Wireless Configuration Utility and click WPS tab. Select Enter the PIN of my
access point or wireless router. In the empty field beside PIN, enter the PIN labeled on
the bottom of the Router (here takes 13492564 for example). If you have generated a new
PIN code for your Router, please enter the new one instead. Click Connect to continue.