User's Manual

SMCWPCIeS-N EZ Connect

N 11n Wireless PCI-E Adapter

Chapter 6 WPS configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing

network quickly.

If the wireless Router supports Wi-Fi Protected Setup (WPS), you can establish a wireless

connection between wireless adapter and router using either Push Button Configuration (PBC) or

PIN method.

First, the WPS software should be installed. Insert the installation CD into your CD-ROM drive,

and open the folder named SMCWPCIeS-N. Double-click WPS.exe to start the installation, then

the following screen for preparing setup will appear.

Figure 4-1

Please follow the guide of the Operating System to complete the WPS installation. After that, WPS

function can be enabled. Here we will introduce how to configure the WPS in a SMC Wireless

Router as an example.

6.1 PBC (Push Button Configuration) method

1. First, press the WPS button directly on the front panel of the Router shown in Figure 4-2.