Manualshelf

User's Manual

ManualsBrandsSMC Networks ManualsAdaptersSMC Networks SMCWPCIeS
31323334353637383940
SMCWPCIeS-N EZ Connect
TM
N 11n Wireless PCI-E Adapter
27
Chapter 4 Configuration for Windows Vista
SMC Wireless Lite-N Client Utility (SWCU) is not available for Windows Vista. So after the
Adapter's driver has been installed, we have to use Windows WLAN Autoconfig to establish a
connection. Please follow the steps below.
1. Right-click the icon
at the bottom of your screen in your system tray and then select
“Connect to a network”.
Figure 4-1
2. This page will then display and you will see the available wireless network list. Select the
SSID of your Access Point, take test for example. Click Connect.
Figure 4-2 Select A Network