User's Manual

SMCWPCIeS-N EZ Connect
TM
N 11n Wireless PCI-E Adapter
24
Figure 3-12
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in
the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click Move Up or Move Down to move the selected Profile up or down or click on remove to
remove the selected profile from the list.
)
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6. Click OK.
7. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in
5Figure
3-3).
)
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the highest
priority and the same SSID as one of the found networks will be used to connect to the network. If
the connection fails, the client adapter will try the next highest priority profile that matches the
SSID until an available network is found.