User's Manual

SMCWPCIeS-N EZ Connect
TM
N 11n Wireless PCI-E Adapter
14
¾ Server Based Authentication - This shows whether server based authentication is used
(IEEE 802.1x).
¾ Signal Strength - This shows the strength of the signal.
¾ Extension Channel: This shows the other channel connected when the wireless AP is set in
40MHz channel width.
Click Advanced on the screen above, you can see advanced information about the program and
its operations.
Figure 3-2
¾ Network Name (SSID): The Name of wireless network your adapter connected.
¾ Server Based Authentication: Show whether or not to use the authentication based on
server.
¾ Data Encryption: Show the type of data encryption.
¾ Authentication Type: Show the type of authentication.
¾ Message Integrity Check: Show whether or not the MIC is enabled, MIC is used to prevent
the bit-flip attack.
¾ QoS: The protocol of QoS.
¾ CCKM Authentication: Show whether or not the Cisco Centralized Key Management is be
used.
¾ Management Frame Protection: Show whether or not the management frame is be
protected. The management frame is part of MAC frame; it’s used to manage the service of
data link layer.