SMCWHS-POS
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable. However, no responsibility is assumed by SMC for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SMC. SMC reserves the right to change specifications at any time without notice. SMC Networks, Inc. 38 Tesla Irvine, CA 92618. All rights reserved.
LIMITED WARRANTY Limited Warranty Statement: SMC Networks, Inc. (“SMC”) warrants its products to be free from defects in workmanship and materials, under normal use and service, for the applicable warranty term. All SMC products carry a standard 90-day limited warranty from the date of purchase from SMC or its Authorized Reseller. SMC may, at its own discretion, repair or replace any product not operating as warranted with a similar or functionally equivalent product, during the applicable warranty term.
FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Compliances FCC - Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications.
+A1: 2001 (80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m) • Electrical fast transient/burst according to EN 61000-4-4:1995 + A1: 2001 (AC/DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV) • Surge immunity test according to EN 61000-4-5:1995 + A1: 2001 (AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV) • Immunity to conducted disturbances, Induced by radio-frequency fields: EN 61000-4-6:1996 + A1: 2001 (0.
11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden. 12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elektrischen Schlag auslösen. 13. Öffnen sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. 14.
EliteConnectTM Mini-POS Ticket Printer Table of Contents 1. Unpacking A. Standard Package 9 9 2. Indicators and Connections A. Front Panel of the Printer B. Rear View of the Printer C. Loading Paper Roll 9 9 9 10 3. Self Test of the Printer 10 4. Using the Printer A. Connecting the Mini-POS Ticket Printer to the Wireless Hotspot Gateway B. Configuring the Printer for Ticket Printing 11 11 12 5. Specifications A. Physical Characteristics B. Printer Font C. Print Paper 13 13 13 13 6. Pinouts A.
1. Unpacking A. Standard Package 1) EliteConnectTM Mini-POS Ticket Printer 2) Control Keypad 3) User's Guide 4) Y Cable 5) Printer Cable 6) Power Adapter (7.5 VDC output) 7) Power Cord 8) Paper Roll 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece 2. Indicators and Connections A.
C. Loading Paper Roll 1) Open the top cover by lifting firmly from the indented hold spaces located on the front left and right side of the cover. 2) Place the paper roll in the paper compartment. Make sure that the leading end of the paper roll is fed from the bottom of the roll. Pull the leading end of the paper roll past the front panel of the printer. 3) Close the top cover and make sure the roller sits firmly on top of the leading end of the paper roll. 3.
4. Using the Printer A. Connecting the Mini-POS Ticket Printer to the Wireless Hotspot Gateway • Locate an optimum location for the printer. In most instances, the best place for the printer is close to the keypad and Hotspot Gateway. • Using the Y-type cable provided (as shown in Figure 1), connect the 7-pin serial (PS/2) cable end to the keypad, shown as Figure 2. Fig. 1. Y-cable Fig. 2. Connect Y-cable to keypad.
• Connect the AC power adapter to the printer's power socket and the other end to the electrical outlet. NOTE: Use of a different adapter may result in product damage. B. Configuring the Wireless Hotspot Gateway and Printer for Ticket Printing Detailed instructions can be found in the EliteConnect 2.4GHz 802.11g Wireless Hotspot Gateway User Guide. Please see sections 1.8.6 to 1.8.6.
5. Specifications A. Physical Characteristics Print Method Paper Width Effective Print Width Print Speed Print Head Interface (Serial) Interface (Parallel) Cash Drawer Port Net Weight Dimensions Operating Environment Power Input Direct thermal 57.5 mm ± 0.5 mm 48 mm Approx. 52 mm/sec or 14 lines/sec Print density: 384 dots/line or 8 dots/mm Print dot space: 0.
6. Pinouts A. Serial Connection B.
C. Power Input PRP-058 requires DC 7.5V/2.0A power. D. Cash Drawer Port Pin# 1. 2. 3. 4. 5. 6.
7. Command Set No.
FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canada (24 hours a day, 7 days a week) (800) SMC-4-YOU; Phn: (949) 679-8000; Fax: (949) 679-1481 From Europe : Contact details can be found on www.smc-europe.com or www.smc.com INTERNET E-mail addresses: techsupport@smc.com european.techsupport@smc-europe.com Driver updates: http://www.smc.com/index.cfm?action=tech_support_drivers_downloads World Wide Web: http://www.smc.com/ http://www.smc-europe.com/ For Literature or Advertising Response, Call: U.S.A.
