User's Manual

HAPTER

| Access Control Settings

Target

– 95 –

Figure 78: Host Settings

TARGET

Choose menu “Access Control->Target”, you can view and set a Target list

in the screen as shown in the following figure. The target list is necessary

for the Access Control Rule.

Figure 79: Target Settings

◆ Target Description - Here displays the description about the target

and this description is unique.

◆ Information - The target can be IP address, port, or domain name.

◆ Modify - To modify or delete an existing entry.

To add a new entry, please follow the steps below.

1. Click the Add New button.

2. In Mode field, select IP Address or Domain Name.

■

If you select IP Address, the screen shown is Figure 79.

1) In Target Description field, create a unique description for the

target (e.g. Target_1).

2) In IP Address field, enter the IP address of the target.

3) Select a common service from Common Service Port drop-down

list, so that the Target Port will be automatically filled. If the

Common Service Port drop-down list doesn’t have the service you

want, specify the Target Port manually.

4) In Protocol field, select TCP, UDP, ICMP or ALL.